http://albany.craigslist.org

Project Architect (Capital District)
Award winning design-oriented firm seeks well rounded Project Architect with at least 10 years experience. Must be licensed in NYS and have LEED credentials. We are looking for an architect that can take a project from concept through construction administration.

Must be proficient with Revit, 3D Studio Max, and Photoshop.


Design Architect (Columbia/Berkshire Counties)
Detail oriented creative architect for high end residential projects needed by internationally published high end contemporary architecture firm.

Revit a must.

Temporary position on a project basis. Working in your own space/telecommuting desired.




 Mechanical Designer/Engineer (Albany)
CSArch Architecture / Engineering / Construction Management, P.C. headquartered in Albany, NY seeks a senior level Mechanical Designer/Engineer for our Albany office. Candidate must have 10-15 years experience with building systems design, with a concentration on HVAC, and the ability to lead projects and mentor other staff. Experience with high performance design and Revit a plus. The successful candidate will work in a collaborative environment with architects and other building systems professionals to create sustainable buildings. Email resume to employment@csarchpc.com. EOE


Electrical Designer/Engineer Needed (Clifton Park)
Job Description:

Position requires thorough knowledge of electrical design and engineering techniques, as well as CAD and graphics skills. Responsible for planning and conducting independent work requiring judgment in the evaluation, selection, application and adaptation of engineering techniques, procedures and criteria. Applicants must have the ability to devise new approaches to problems, and prepare or modify drawings, specifications, calculations, charts and graphs, and monitor work for compliance to applicable codes and accepted engineering practices.

Typical Duties:
Typical duties will include but not be limited to the preparation and/or modification of the following:
• Electrical drawings, specifications, calculations, charts and graphs.
• Project controls, cost estimates, quantity takeoffs and manpower requirements for proposals, forecasts and change orders.

Essential Functions:
Responsibilities will include but not be limited to the following:
• Requires a broad knowledge of precedents in the specialty area and a solid knowledge of principles and practices of related technical areas.
• Requires a broad knowledge of the application of engineering to plant constructability as applied to construction methods and materials, and the economics involved.
• Perform assignments independently with scope guidance from Project Manager.
• Assume the lead engineer's role on assigned projects.
• May serve as Project Engineer and Client point of contact...
• Plan, schedule, conduct, and coordinate program of assigned engineering work and projects.
• Ensure proper interdisciplinary coordination and effective communication on projects.
• Analyze reports, maps, drawings, tests, and other data to plan and design work.
• Assemble bid, approval, and construction issue drawing packages.
• Review bid analyses and make recommendations.
• Direct and/or participate in job site visits to collect or deliver design and engineering data.
• Use engineering and design computer software to complete assigned work.

Education/Experience:
• Bachelor of Science degree in an engineering or scientific discipline, and 7-10 years of experience with advance knowledge in electrical engineering, obtainable usually through a combination of experience and continuing education; or
• Master of Science degree in an engineering or scientific discipline, and 7-10 years of experience with advanced technical knowledge in electrical engineering, obtainable usually through a combination of experience and continuing
education; or equivalent combination of education, training and experience.

Skills & Special Requirements/Licensing:
• AutoCAD experience is a requirement. Revit and/or Microstation BIM is advantageous.
• Direct experience in coordinating electrical design across Architectural and Engineering (Mechanical, HVAC, P/FP) disciplines
• Licensed P.E. or E.I.T. is preferred
• Knowledgeable in National Fire Protection Association/National Electrical Code (NFPA/NEC) Standards, California Title 24 Building Energy Efficiency Standards, and IEEE/IES/API Standards

We offer a competitive compensation package. We are an Equal Opportunity Employer.
Please reply with cover letter and resume.


Project Architect (Saratoga Springs, NY)
Award winning design-oriented firm in Saratoga Springs, NY seeks motivated Project Architect with 6-10 years experience for involvement in all phases of design and construction documentation for a diverse range of projects.

Strong working knowledge of Revit is a mandatory requirement; resumes without will not be accepted/reviewed.


http://albuquerque.craigslist.org

Mechanical Project Manager (Albuquerque)
We are an Albuquerque based Electrical/Mechanical Engineering firm looking for a Mechanical Project Manager/Designer. The ideal candidate for our position is a self-motivated personality with good project and client relationship management experience.

Qualifications: Experience in designing and drafting HVAC & Plumbing Systems for commerical buildings along with an understanding of building codes. Must be familiar with LEED and energy modeling. Healthcare & Education system design experience is preferred.

Software Knowledge: Candidates should be able to design/draft in REVIT and have a knowledge of all new AUTOCAD software.

Please email cover letter, detailed project experience with descriptions of the roll taken in design/development of projects, resume and references.

http://allentown.craigslist.org

HVAC Drafter (Montgomery County)
HVAC Drafter needed. Must have Autocad MEP and Revit MEP with HVAC drafting experience. The position is temporary to permanent. Please respond with resumes if you're interested.


http://anchorage.craigslist.org

Mechanical Engineer Drafter (Anchorage)
Great local engineering company is looking for a mech engineering drafter.

Autocad is a must, experience with Revit software a definite plus.

Support positions as well as project managment positions available. Need someone willing to contribute and motivated.

Pay is DOE


Mechanical Engineer/Drafter (Anchorage, Alaska)
Mechanical Engineers - Are you looking for an opportunity to design innovative, world class projects in a leading edge environment? PDC Inc. Engineers' mechanical department is looking for motivated professionals to join our dynamic teams in Anchorage and Fairbanks.

PDC is an all Alaskan, full service engineering company delivering energy, facility, and transportation projects throughout Alaska and the arctic.

Available positions include:
- Entry level mechanical engineer in Anchorage, minimum 4 year degree in engineering. Passage of Fundamentals of Engineering exam preferred.
- Mechanical production position in Anchorage, 3 year Architectural & Engineering Technology degree preferred.
- Mechanical Professional Engineer in Fairbanks and Anchorage with a minimum four years of experience in HVAC design.

Experience in HVAC, piping, plumbing, fuels, fire protection, medical, sustainable, or industrial design desired. Highlight familiarity with AutoCAD and Revit. Hands on experience in HVAC and/or plumbing construction industry also desired. Strong written and oral communication skills required. Positions offer growth and leadership opportunities.

PDC is an EOE and offers excellent pay and benefits. Please email resumes to the address listed or mail to PDC, Inc. Engineers, 2700 Gambell Street, Suite 500, Anchorage, AK 99503. Transforming Challenges into Solutions"

http://annarbor.craigslist.org

No item elements found in rss feed.

http://asheville.craigslist.org

No item elements found in rss feed.

http://atlanta.craigslist.org

Interior Designer I (Atlanta)
NELSON is focused on creation with passion to deliver. We provide creative solutions through Interior Design, Architecture, Engineering, Strategic Planning, Information Services and Workplace Services in the corporate and residential real estate markets. With 33 locations in the United States and overseas, and the resources of more than 320 professionals worldwide, NELSON provides dedicated, quality service through a proven delivery network.

Selected by Interiors & Sources magazine as one of the five "Great Places to Work" and ranked among the "Top Ten Giants" by Interior Design magazine, NELSON is always looking for people with skills, vision and character who can go beyond a job description to find new and innovative ways to contribute to our company's success. If you are looking for a growing, highly professional work environment and enjoy working with creative minds, NELSON is the place for you. For more information on NELSON, please visit our Website at www.nelsononline.com.

We are currently seeking an Interior Designer to work in our Atlanta office. The Interior Designer will work on corporate interiors and/or retail projects and participate as a team member as required for all phases of projects; from programming, schematic design and design development, to construction documents, furniture specification, and construction administration. The successful candidate will be expected to assist in aligning design intent, project schedule and budget. Collaborate with the team including Senior Designer, Designer II and III and assist as appropriate on the regular and periodic NELSON Design Reviews.

Responsibilities:

Qualifications:


We offer competitive wages based on skills and experience, excellent benefits package including; Paid Time Off, medical, dental, 401K, pre-tax Flexible Spending Accounts, and more. NELSON is an Equal Opportunity Employer.

If you have read this and feel this may be the career opportunity for you, please apply by emailing your resume, cover letter and salary requirements. Please list the job title and location in the subject line. Due to the large volume of candidates, only qualified applicants will be contacted. No phone calls or agencies please.



 Mechanical Engineer, Designer (Alpharetta, GA 30004)
Conway & Owen, Inc. is a multi-discipline consulting engineer firm providing design services for mechanical, electrical, plumbing and fire protection systems for the construction industry including office buildings, hotels, retail, healthcare facilities, and other project types.

Two positions available, one mechanical engineer and one mechanical Revit MEP designer.

Benefits include paid time off, health insurance, 401k and life insurance.

Construction/Design industry experience required.

Mechanical Engineer - HVAC and AutoCAD experience is required; plumbing, fire protection and Revit is a plus.

Depending on level of experience, the candidate would have some or all of the following capabilities: design of mechanical systems consists of heating, ventilating and air conditioning, refrigeration, chilled water, and hot water. Design includes equipment sizing, selection and layout, duct work and piping sizing and layout, and control sequences. Analysis consists of economic feasibility, hydraulic analysis, and heating and cooling load calculations. Preparation of drawings and specifications.

Mechanical Revit MEP Designer - 2 years experience using Autodesk Revit MEP



 Project Coordinator/Architect (Norcross)
Architectural firm in Norcross seeks architects to join our firm. Qualified candidates must have a degree in architecture with 3-5 years experience, preferably in the mixed use/retail sector. Must be proficient in AutoCAD with Revit experience and LEED accrediation a plus.

Our company offers competitive salaries and benefits including medical, dental, vision, life, disability, flexible spending accounts and 401(k) plan.

Submit resume along with list of projects.

Must possess the necessary documents to work in the United States. No relocation allowance.


Telecommunications Structured Cabling Systems Designer (Decatur GA)
Background
The Sextant Group, Inc. is a national independent consulting firm specializing in the planning and design of learning, communications and entertainment facilities and systems. The firm is renowned for high-quality work on cutting edge projects.

The Sextant Group will be interviewing qualified candidates for positions at our Atlanta, New York, Phoenix, and Pittsburgh offices.

Job Description
The Telecommunications Structured Cabling Systems Designer's role is to provide consulting and design services to our clients for telecommunication pathways, spaces and cable plant projects. The position will require that the candidate actively participates in and manages several projects at the same time while ensuring efficiency, accuracy and top quality work is being delivered to our clients.

Responsibilities
• Key contributor within a project design team, bringing a future-perspective of technology
• Devise cost-effective solutions in voice, data, and fiber structured cabling specifically optimized for the user
• Develop high-quality information technology related infrastructure construction drawings, details, cost analysis and specifications language
• Collaborate with MEP and architectural team members and guide clients through the technology selection process
• Review submittals of shop drawings, coordinating with architects, contractors, engineers, and consultants
• Perform site walk-through to review adherence to standards and procedures for copper and fiber cabling.
• Ensure that all work is completed on-time, in-budget, and consistently within The Sextant Group's high standards of quality

Position Requirements
• Five years experience in the design and implementation of telecommunications systems, spaces and cable plant projects
• Intimate knowledge of services, hardware, infrastructure and systems architecture for IT
• Excellent attention to detail and outstanding communication skills, both oral and written
• Values that include integrity, accountability and a willingness to have fun
• Works equally well as an individual contributor or team member
• Maintains a professional and positive attitude in a fast paced and occasionally high pressure environment
• Expertise in AutoCAD ADT-2006 or later, proficiency in Microsoft Office 2003 or later, including Word, Excel & Outlook
• BICSI Certification (active RCDD or test-ready; additional certifications including OSP, WD, ITS Installer-1, or ITS Installer-2 a plus)
• PLUSES: PE, additional industry certifications, experience working in AutoDesk Revit

All candidates must be driven to satisfy the needs of end users and have the ability to deliver high-caliber end results in a timely manner while operating without direct supervision. Some overnight travel may be required. Compensation offered is commensurate with experience, and includes excellent benefits package with medical, dental, long term disability, 401K. EOE

Resumes will be accepted via email only. Qualified candidates are encouraged to send resume, references and salary requirements to HumanResources@TheSextantGroup.com.


Architect (Atlanta, GA)
Leading Innovation and Integrity... As members of a leading design, geospatial and infrastructure management firm, Woolpert employees inspire each other to be the best through their ingenuity, diversity and vision. With projects that contribute to the sustainability, security and efficiency of federal, local and private-sector clients across the U.S. and abroad, our employees appreciate rewarding careers that contribute to advances in the Architectural/Engineering industry while also knowing they're serving the needs of some of the best communities and organizations around the world.

Woolpert is seeking an Architectural Intern for our Atlanta, Georgia office. Woolpert's architecture projects include facilities for Colleges and Universities, K-12 Schools, Military Housing, and Private Development projects. The ideal candidate for this position will have a good sense of design, have some rendering skills, be skilled in Revit (2010 or newer, and/or Bentley Architecture v8i or newer). Other important qualifications include demonstrated experience in use of Microsoft Office, Adobe, SketchUp, AutoCAD, and 3ds Max. Experience working on multi-disciplinary projects would be a plus.
The person in this position will work directly under the supervision of a registered project Architect and have an opportunity to accumulate IDP credits in all required categories for registration. Responsibilities will include assisting in project design, construction documents, and construction administration.

Qualified candidates will have a bachelors' degree in Architecture and four (4) years related experience, MA/MS and two (2) years related experience or eight (8) years related experience.

Presenting Opportunities and Challenges at Every Turn... As a firm that recognizes the importance of developing top talent from within, our employees have access to a wide range of training and coaching programs and are rewarded for their achievements through our excellent benefits package and competitive salaries. For consideration, please apply on line at http://www.woolpert.com using requisition number EA11392-3.

Please no agency or recruiter calls. We are proud to be an EEO/AA employer (M/F/D/V) who maintains a drug-free workplace.



http://austin.craigslist.org

MEP Electrical EIT (Austin, TX 78701)
Job Description:
- Prepare complete drawings and specifications
- Coordinate with architects and other engineering disciplines
- Ability to perform all phases of electrical work including field investigation, construction documents and construction administration

Experience Preferred:
- Familiar designing electrical distribution systems for commercial buildings including power distribution and lighting
- Experience with projects types such as commercial, educational, healthcare, retail and water/wastewater infrastructure
- Knowledge of the National Electrical Code and related building and energy codes
- Proficiency in AutoCAD required, and working knowledge of Autodesk REVIT MEP software a plus
- EIT licensed and 2+ years of experience required



 Plumbing Designer (Austin)
PLUMBING DESIGNER

Dynamic Architectural/Engineering firm is looking for an experienced, career-minded, growth oriented individual to make a real impact on daily operations. This is an opportunity to join an established firm and gain diverse experience with many high-profile projects.
Primary responsibilities will be to design plumbing systems (develop plans and specs), meet with clients, coordinate with architects, and function well in a team environment.

Fire protection experience is preferred.

Autocad experience is required and Revit experience is preferred.

Minimum two years experience.

PDF required for submitted resume/letter/portfolio.
Benefits include health and dental insurance, 401(k) plan, paid vacation, sick leave and holidays.
Position is highly visible, full-time, and full of opportunity.
Both contract and permanent positions will be evaluated.

Equal Opportunity Employer



 MEP REVIT/CAD Technician (Austin)
MEP REVIT/CAD TECHNICIAN

Dynamic Architectural/Engineering firm is looking for an experienced, career-minded, growth oriented individual to make a real impact on daily operations. This is an opportunity to join an established firm and gain diverse experience with many high-profile projects.

Primary responsibilities will be to draft/model MEP systems and function well in a team environment.

Autocad experience is preferred and Revit experience is required.

PDF required for submitted resume/letter/portfolio.
Benefits include health and dental insurance, 401(k) plan, paid vacation, sick leave and holidays.

Position is highly visible, full-time, and full of opportunity.
Both contract and permanent positions will be evaluated.

Equal Opportunity Employer


http://bakersfield.craigslist.org

No item elements found in rss feed.

http://baltimore.craigslist.org

CADD - Intern Architect (Glen Burnie)
Nationally recognized commercial architecture firm seeks CADD/Intern Architect; for over 17 years our company has had the privilege of developing lasting relationships with clients while providing them with a high level of service. We continue to grow based on the strength of those relationships.

Candidate should have:
- 3-5 years of commercial architectural experience;
- a strong understanding of commercial construction document preparation;
- a working knowledge of commercial construction methodologies;
- experience with the International Codes - Building, Plumbing, Mechanical, Energy, Etc.
- proficiency in Autocad - Revit experience a plus.

Relationships are the core of our business, and the most important ones we cultivate are those with our employees.

Please express interest by replying with a cover letter (describing qualifications, availability and salary history) and a copy of your current resume.

Thank you.



Architect (University of Maryland in Baltimore)
TO APPLY, go to: www.hr.umaryland.edu/careers and search for Job Requisition #7082 OR CLICK HERE

University of Maryland in Baltimore is currently seeking an Architect to work within the Department of Facilities Management. The selected candidate will be responsible for designing moderately complex Architectural systems for building renovations, including research laboratories, academic spaces, and offices. The individual will be responsible for identifying user requirements, conducting thorough field surveys, and producing construction documents for bidding. Conduct construction field observations and review compliance with construction documents. Collaborate with design team members to develop comprehensive construction documents. Perform design review of construction documents produced by outside consultants.


ESSENTIAL FUNCTIONS:

Meet with client and review requirements to determine architectural, space planning and interior design scope of work. Prepare budget level and detailed cost estimates and schedules for new projects. Design architectural systems using industry standard practices and techniques to ensure that the needs of the client are met.

Estimate work effort and durations within discipline to assist in preparing fee proposals for design services.

Estimate cost and duration of construction within design discipline at various stages of design, including budget estimating at project initiation through final design documents.

Utilize CAD software to design and produce construction drawings for bidding and create construction specifications to suit the needs of the project and to meet the requirements of the UMB Design Standards and Architecture/Engineering Procedure Manual.

Review and correct drawings to ensure proper architectural techniques and required specifications have been utilized, and to ensure that the design is in compliance with the requirements of the University Design Standards and Architecture/Engineering Procedure Manual.

Perform space analysis, programming studies, and feasibility studies, conduct building assessments, and provide technical assistance to other team members. Write and edit reports to summarize results of analyses and assessments, and provide recommendations and conclusions with appropriate supporting calculations and data.

Inspect work under construction to insure compliance with the construction documents and contract requirements.

Perform all construction phase services, including reviews and mark-ups of product submittals, shop drawings, request for information, construction schedules, change order proposals, contractor invoices, etc. Prepare supplemental instructions and construction document change documentation.

Meet with clients and other design team members to coordinate and finalize various project specifications, materials, and schedules, and design details with the other disciplines.

Prepare any necessary reports and recommendations concerning preliminary and final designs.


MINIMUM QUALIFICATIONS:

Bachelor's degree in Architecture or equivalent work experience.

Registered and licensed with the Maryland Board of Architects.

Requires a minimum of five (5) years of professional experience.


KNOWLEDGE, SKILLS, AND ABILITIES:

Thorough knowledge of architectural design and construction practices and laboratory layout and design, including applicable building and energy codes, ADA regulations, and sustainable design principles and LEED documentation.

Ability to produce and present boards and schedules for interior design finishes.

Proficient working experience with AutoCAD and REVIT design, project management, and office software programs.

Ability to effectively communicate, negotiate, and interact with a broad range of internal and external individuals or agency representatives as well as collaborate effectively with peers and subordinates.

Ability to analyze, compare and interpret facts and figures and make sound judgments based upon this knowledge.

Ability to prioritize ongoing and new projects, conduct research, gather information, and facilitate timely project completion.

Ability to produce designs and make design modifications when reviewing design documents within a professional discipline.

Ability to work with management to set and achieve goals based on priorities of projects and support of internal and external customers.

Ability to address multiple tasks, technical issues, and contingencies simultaneously.

Ability to evaluate proposals, design and construction modifications, and change orders.

Skill in continuously seeking to improve the quality of services and processes.


The University of Maryland offers a generous benefits package that includes health, vision, prescription and dental insurance options; 22 days of annual leave, 11 paid holidays, 3 personal days, 3 floating holidays, 15 sick days per year; retirement options and tuition remission to most programs in the University System of Maryland for employees and dependents.

Hiring Range: Commensurate with education and experience

Closing Deadline: 2/29/2012*
Original Posting Date: 2/01/2012

*Application review will begin on 2/15/2012.

TO APPLY, go to: www.hr.umaryland.edu/careers and search for Job Requisition #7082 OR CLICK HERE

If accommodations are needed, contact Staffing & Career Services at 410-706-7171, Monday -- Friday, 8:30am -- 4:30pm EST. Maryland Relay can be accessed by dialing 711 (in-state) or 1-800-735-2258.

The University of Maryland, Baltimore is an Equal Opportunity/Affirmative Action Employer. Minorities, women, veterans and individuals with disabilities are encouraged to apply.


Electrical Engineer (University of Maryland in Baltimore)
TO APPLY, go to: www.hr.umaryland.edu/careers and search for Job Requisition #7086 OR CLICK HERE

University of Maryland in Baltimore is currently seeking an Electrical Engineer to work within the Department of Facilities Management. The selected candidate will be responsible for designing moderately complex Electrical systems, including power, lighting, fire alarm, security, and pathways for telecommunications, for building renovations, including research laboratories, academic spaces, and offices. The individual will be responsible for identifying user requirements, conducting thorough field surveys, and producing construction documents for bidding. Conduct field observations during construction to review compliance with construction documents. Coordinate with other members of the design team for the comprehensive development of construction documents. Perform design review of construction documents produced by outside consultants.


ESSENTIAL FUNCTIONS:

Review client standards, specifications and other documentation to determine electrical engineering requirements. Prepares budget level and detailed cost estimates and schedules for new projects.

Design electrical systems using industry standard practices and techniques to ensure that the needs of the client are met. Estimate work effort and durations within discipline to assist in preparing fee proposals for design services. Write and edit construction specifications to suit the needs of the project and the client in accordance with UMB Design Standards and Architecture/Engineering Procedure Manual.

Estimate cost and duration of construction within design discipline at various stages of design, including budget estimating at project initiation through final design documents.

Utilize CAD software to design and produce engineering drawings for bidding and create engineering specifications to suit the needs of the project and to meet the requirements of the UMB Design Standards and Architecture/Engineering Procedure Manual.

Review and correct drawings to ensure proper engineering techniques and required specifications have been utilized, and to ensure that the design is in compliance with the requirements of the UMB Design Standards and Architecture/Engineering Procedure Manual.

Perform engineering analysis and feasibility studies, conduct building assessments, and provide technical assistance to other team members. Write and edit reports to summarize results of analyses and assessments, and to provide recommendations and conclusions with appropriate supporting calculations and engineering data.

Inspect work under construction to insure compliance with the construction documents and contract requirements.

Perform all construction phase services, including reviews and mark-ups of product submittals, shop drawings, requests for information, construction schedules, change order proposals, contractor invoices, etc. Prepare supplemental instructions and construction document change documentation.

Meet with clients and other design team members to coordinate and finalize various project specifications, materials, and schedules, and design details with the other disciplines.

Prepare any necessary reports and recommendations concerning preliminary and final designs.


MINIMUM QUALIFICATIONS:

Bachelor's degree in Electrical Engineering or equivalent work experience.

Registered and licensed with the Maryland Board for Professional Engineers.

Requires a minimum of five (5) years of professional experience.


KNOWLEDGE, SKILLS, AND ABILITIES:

Thorough knowledge of Electrical system design and construction practices, including applicable building and energy codes, and sustainable design principles, including LEED documentation.

Knowledge of security, fire alarm, and telecommunications (cabling) systems.

Proficient working experience with AutoCAD and REVIT design, project management, and office software programs. Familiarity and working experience with industry standard engineering software for load calculations, lighting calculations, energy analysis, and engineering analysis.

Ability to perform occasional short circuit and coordination studies.

Ability to effectively communicate, negotiate, and interact with a broad range of internal and external individuals or agency representatives as well as support effective collaboration with peers and subordinates.

Ability to analyze, compare and interpret facts and figures and make sound judgments based upon this knowledge.

Ability to prioritize ongoing and new projects, conduct research, gather information, and facilitate timely completion of construction phases.

Ability to produce designs and make design modifications when reviewing design documents within a professional discipline.

Ability to work with management to set and achieve goals based on priorities of projects and support of internal and external customers.

Ability to address multiple tasks, technical issues, and contingencies simultaneously.

Ability to evaluate proposals, design and construction modifications, and change orders.

Skill in continuously seeking to improve the quality of services and processes.


The University of Maryland offers a generous benefits package that includes health, vision, prescription and dental insurance options; 22 days of annual leave, 11 paid holidays, 3 personal days, 3 floating holidays, 15 sick days per year; retirement options and tuition remission to most programs in the University System of Maryland for employees and dependents.


Hiring Range: Commensurate with education and experience

Closing Deadline: 2/29/2012*
Original Posting Date: 2/01/2012

*Application review will begin on 2/15/2012.

TO APPLY, go to: www.hr.umaryland.edu/careers and search for Job Requisition #7086 OR CLICK HERE

If accommodations are needed, contact Staffing & Career Services at 410-706-7171, Monday -- Friday, 8:30am -- 4:30pm EST. Maryland Relay can be accessed by dialing 711 (in-state) or 1-800-735-2258.

The University of Maryland, Baltimore is an Equal Opportunity/Affirmative Action Employer. Minorities, women, veterans and individuals with disabilities are encouraged to apply.


Mechanical Engineer (University of Maryland in Baltimore)
TO APPLY, go to: www.hr.umaryland.edu/careers and search for Job Requisition #7081 OR CLICK HERE

University of Maryland in Baltimore is currently seeking a Mechanical Engineer to work within the Department of Facilities Management. The selected candidate will be responsible for designing moderately complex HVAC, fire protection, and plumbing systems for building renovations, including research laboratories, academic spaces, and offices. The individual will be responsible for identifying user requirements, conducting thorough field surveys, and producing construction documents for bidding. Conduct field observations during construction to review compliance with construction documents. Coordinate with other members of the design team for the comprehensive development of construction documents. Perform design review of construction documents produced by outside consultants.


ESSENTIAL FUNCTIONS:

Review client standards, specifications and other documentation to determine mechanical engineering, fire protection, and plumbing requirements. Prepare budget level and detailed cost estimates and schedules for new projects. Estimate work effort and durations within discipline to assist in preparing fee proposals for design services.

Design HVAC, fire protection, and plumbing systems using industry standard practices and techniques to ensure that the needs of the client are met. Estimate work effort and durations within discipline to assist in preparing fee proposals for design services. Write and edit construction specifications to suit the needs of the project and the client in accordance with UMB Design Standards and Architecture/Engineering Procedure Manual.

Estimate cost and duration of construction within design discipline at various stages of design, including budget estimating at project initiation through final design documents.

Utilize CAD software to design and produce engineering drawings for bidding and create engineering specifications to suit the needs of the project and to meet the requirements of the UMB Design Standards and Architecture/Engineering Procedure Manual.

Review and correct drawings to ensure proper engineering techniques and required specifications have been utilized, and to ensure that the design is in compliance with the requirements of the UMB Design Standards and Architecture/Engineering Procedure Manual.

Perform engineering analysis and feasibility studies, conduct building assessments, and provide technical assistance to other team members. Write and edit reports to summarize results of analyses and assessments, and to provide recommendations and conclusions with appropriate supporting calculations and engineering data.

Inspect work under construction to insure compliance with the construction documents and contract requirements.

Perform all construction phase services, including reviews and mark-ups of product submittals, shop drawings, request for information, construction schedules, change order proposals, contractor invoices, etc. Prepare supplemental instructions and construction document change documentation.

Meet with clients and other design team members to coordinate and finalize various project specifications, materials, and schedules, and design details with the other disciplines.

Prepare any necessary reports and recommendations concerning preliminary and final designs.


MINIMUM QUALIFICATIONS:

Bachelor's degree in Mechanical Engineering or equivalent work experience.

Registered and licensed with the Maryland Board for Professional Engineers.

Requires a minimum of five (5) years of professional experience.


KNOWLEDGE, SKILLS, AND ABILITIES:

Thorough knowledge of HVAC, fire protection, and plumbing system design and construction practices, including applicable building and energy codes, and sustainable design principles, including LEED documentation.

Knowledge of mechanical systems and automatic temperature control systems.

Proficient working experience with AutoCAD and REVIT design, project management, and office software programs. Familiarity with load calculation programs such as Trane Trace or Carrier HAP, energy analysis programs.

Ability to effectively communicate, negotiate, and interact with a broad range of internal and external individuals or agency representatives as well as effectively collaborate with peers and subordinates.

Ability to analyze, compare and interpret facts and figures and make sound judgments based upon this knowledge.

Ability to prioritize ongoing and new projects, conduct research, gather information, and facilitate timely project completion.

Ability to produce designs and make design modifications when reviewing design documents within a professional discipline.

Ability to work with management to set and achieve goals based on priorities of projects and support of internal and external customers.

Ability to address multiple tasks, technical issues, and contingencies simultaneously.

Ability to evaluate proposals, design and construction modifications, and change orders.

Skill in continuously seeking to improve the quality of services and processes.


The University of Maryland offers a generous benefits package that includes health, vision, prescription and dental insurance options; 22 days of annual leave, 11 paid holidays, 3 personal days, 3 floating holidays, 15 sick days per year; retirement options and tuition remission to most programs in the University System of Maryland for employees and dependents.


Hiring Range: Commensurate with education and experience

Closing Deadline: 2/29/2012*
Original Posting Date: 2/01/2012

*Application review will begin on 2/15/2012.

TO APPLY, go to: www.hr.umaryland.edu/careers and search for Job Requisition #7081 OR CLICK HERE

If accommodations are needed, contact Staffing & Career Services at 410-706-7171, Monday -- Friday, 8:30am -- 4:30pm EST. Maryland Relay can be accessed by dialing 711 (in-state) or 1-800-735-2258.

The University of Maryland, Baltimore is an Equal Opportunity/Affirmative Action Employer. Minorities, women, veterans and individuals with disabilities are encouraged to apply.


Mechanical/Electrical Engineers & CAD Technicians (Baltimore, MD)
BKM is a growth-oriented company that has several openings for energetic/ aggressive experienced mechanical and electrical engineers with at least 10 years experience in the industry. We are also in need of experienced CAD technicians with Revit experience. Please forward your resume for review.


CADD Designer (Baltimore City/Timonium)
CADD designer with a minimum of 5 years of experience with AutoCAD and REVIT. Experience with structural and civil engineering projects, design experience helpful.


Civil Engineer (Sparks/Baltimore)
Position for Civil Engineer grad (BS) with minimum of 6 months experience, or CO-OPs and interships. Must know AutoCAD and REVIT. Hydraulics background and PACP certification helpful. Work in Sparks and Baltimore offices.


Electrical Engineer- Commissioning Group (Washington D.C.)
Electrical Engineer
Washington D.C.

Tech USA is currently seeking an Electrical Engineer for a full time position to be a part of a dynamic and diverse team, with an international engineering technology enterprise. We are looking for a seasoned, team oriented, quality minded, and motivated Electrical Engineer to join its Mission-Critical Commissioning Services Group working on the client site at the USDA building in Washington D.C. Our client is a full-service planning, architecture and creative services organization with a diverse portfolio of experience and expertise.. Don't miss this great opportunity and apply today.

Our client is seeking an Electrical Engineer to join its Mission-Critical Commissioning Services Group based in the Baltimore office but working on the client Site at the USDA building in Washington DC.

Responsibilities
§ Reviews electrical systems plans and specifications, owners' program-of-requirements and A/E basis-of-design documents
§ Prepares electrical systems commissioning plans, scripts and reports
§ Observes electrical systems manufacturing, installation and start-up activities in the factory or on site as applicable
§ Carries out electrical systems functional performance and system integration testing
§ Reviews operations and maintenance (O&M) documents and assists training and writing procedures for O&M teams
§ Work in the field to commission and test electrical equipment associated with mission critical facilities
§ Night shift work

Qualifications and Requirements
§ Bachelor of Science in Electrical Engineering (will look at Associates Degreed candidates with Electrical inspection background)
§ 5-8 years of Electrical Engineering experience
§ Basic working knowledge of the NEC and building codes
§ Ability to prioritize and concurrently service multiple projects
§ Extensive field experience and hands-on skills with mission critical facilities
§ Maintains effective communication with project team members
§ Interacts well with other disciplines and clients in a manner that builds productive relationships
§ Experience with AutoCAD and REVIT a plus

SALARY OR PAY RATE: $75-90k preferably

Please email your resume to the anonymous address above. Thanks!

About Tech USA:
Tech USA, Engineering & Construction Solutions is a comprehensive provider of workforce and project support solutions throughout the Engineering, Construction, and Environmental Industries, including Construction Management, Environmental Services, Remediation, Geotechnical Services, Safety, MEP Design & Construction and Biofuels. We are actively seeking candidates for contract, contract-to-hire, project support and permanent placement jobs throughout the nation. View our website to see a list of our current open positions; however, not all of our positions are listed so don't forget to submit your resume and request a consultation with one of our Engineering & Construction recruiting specialists to explore your opportunities further.

At Tech USA we understand that next to your family, your career is one of the most important aspects to a happy and fulfilling life. This is why we take the time to truly understand and get to know our candidates, so we can then pair them with the right job, not just any job. As a result, Tech USA is known throughout the industry for quality, reliability and the highest satisfaction from both our clients as well as the candidates that we represent. Contact a local Tech USA representative today and learn about the many opportunities we may have available for you. Tech USA is an equal opportunity employer.



 ELECTRICAL DRAFTER- REVIT (GAITHERSBURG, MD)
Aerotek is currently working for a specialty electrical subcontractor specializing in design and installation, servicing, and remote monitoring of integrated security systems, Typical projects may include Access Control Systems, Closed Circuit Television, Intrusion Detection and Alarm Systems, Intercom and Emergency Communication, and Command and Control Consoles.

We are currently looking for Electrical Drafters with a strong REVIT 3D background. Candidates must have REVIT 3D background to be qualified for this position.

This is a full time position. Please contact Mike Lew: 301-315-1801 for more i


Electrical Engineer (Baltimore, MD)
Electrical Engineer (2-3)

One of the most repected MEP Firms in the industry has a red hot need for 2-3 Electrical Engineers. If you meet the following qualifications, please email a resume in word doc.Job Description and Duties:




•Bachelor Degree in Electrical Engineering
•Experience working on power lighting, distribution, and electrical design projects
•EIT or PE is required
•Construction site visits and surveys
•Auto cad and/or revit experience
•Shop Drawings review & process
•Specifications preparation
•Coordinate with architects and engineers for compliance
•Documentation of all shop & project drawings
•Team player with good communication skills

**Outstanding medical benes, 401k, and vacation included**

Qualified candidates, please email a resume in word doc.


















Architectural CAD Operator (Key Highway, Baltimore)
Baltimore Architectural Firm located on Key Highway is seeking an Architectural CAD Operator for an On-Call Position.
Applicant MUST have 2 or more years experience with AutoCAD and/or Revit. Applicant MUST have experience in an Architectural Firm.

Includes onsite parking

Please include a sample of your work with resume.



Intermediate Architect (Downtown Baltimore)
Baltimore design firm is seeking an intermediate architect with 3-7 years of experience working on the design of commercial, mixed-use, cultural, and hospitality projects. This is a career-track position for one looking to grow within this firm's Baltimore studio.

Skill and experience requirements include:
•AutoCAD proficiency
•Revit experience
•Extensive SD, DD, CD, and CA experience
•Design and Detailing experience
•Presentation Design / Renderings / 3D Programs
•Coordination and Client Experience

Please reply with a copy of your resume and any available work samples.


Assistant Project Manager (Architecture)


Vanir Construction Management, Inc. is comprised of talented professionals like you. They are intuitive, goal oriented, and think progressively while working in a variety of roles to provide the highest level of client satisfaction. It is this mindset of success, coupled with our opportunities that will help develop and define your career.

Vanir CM currently has a unique opportunity for a talented individual to assist in the continued strategic growth of our organization. The position of Assistant Project Manager, Architecture located in Dammam, Saudi Arabia will work collaboratively with colleagues to deliver intelligent solutions that ensure quality project delivery. As an Assistant Project Manager, Architecture you will have the opportunity to work with an international workforce focused on the design phase management of a large state-of-the-art medical facility. This is an ideal opportunity for someone with experience in integrating BIM technology and collaboration to insure a successful project. As a Vanir employee, you will be a vital member solving complex design, construction, and operational issues with a maintained focus on customer satisfaction. Be part of our unique culture which fosters growth, communication, and teamwork

Job Requirements

• Qualified candidates will possess 3-5 years experience providing architecture or construction management services on large institutional facility projects and programs.
• Knowledge and experience with the utilization of BIM technology in the design and management of complex projects and large project teams is desired.
• Experience with BIM, Revit, and or other related architecture design and modeling programs and technology is necessary.
• Knowledge and experience with construction management procedures, means, and methods.
• Good communication, writing and computer skills are essential.
• Bachelors degree in Architecture, Engineering, Construction Management or related field is required.
• Ability to communicate in Arabic (speak/write) is a plus.

About Vanir:

Over the last 30 years Vanir Construction Management's progressive growth and quality of service has developed this organization into the most respected and recognized provider of construction management solutions. As we continue to grow into new areas and markets, our focus is to remain the same, meet the needs of our clients, and the communities in which we work.

Equal Opportunity Employer M/F/D/V

TO APPLY: www.vanir.com/careers/ourpeople.aspx
Reference#: VAPMOS963


Electrical Engineer, EIT (Baltimore, MD)
Our Client is a well-established, growth-oriented mechanical/electrical engineering firm located in Baltimore County. They offer their employees the opportunity to work on a variety of significant projects in the following sectors: higher education, student life, K-12, life sciences, healthcare, government, mission critical and corporate.

Our client is proud to offer unique opportunities for advancement. Their engineers are involved with every facet of our business. From marketing, to recruitment, to project management, to hands-on design, client trains its new employees to become engineering business people and prepares young engineers for eventual partnership.

They are currently seeking experienced candidates with the following qualifications:

Electrical Design Engineer

Qualifications
3-6 years experience
EIT or ability to get
Project management experience is a plus or would like to get into project management
Be a good communicator and be an ambassador for the company
Design Experience in Data Centers, Healthcare, higher education, student life, K-12, life sciences, or government
Experience with Revit and AutoCAD
Excellent job stability

They offer an abundant benefits package from paid overtime, a flexible work schedule, compressed work week with half day Fridays, comprehensive insurance package, 401(k) retirement plan with match, a wellness benefit for health club membership on campus, and reimbursement for education, certification, and membership with professional organizations.



http://batonrouge.craigslist.org

Structural Engineer (New Orleans)
Structural Engineer Intern or Professional with 2+ years of experience. Structural Engineering firm located in New Orleans , LA. The firm has a solid backlog of mid to large size diverse Structural and Civil Engineering projects and is seeking a structural engineering intern or professional engineer with at least 2 years of experience in commercial building design. Casual atmosphere. Salary DOE. REVIT experience a plus.


http://bham.craigslist.org

Project Architect (Memphis, TN)
Looney Ricks Kiss is a nationally recognized design firm built around a collaborative team of architects, urban designers, planners, interior designers, and environmental graphic designers who believe that great places are created through the integration of all these disciplines.

LRK is currently seeking Project Architects to join our team in Memphis, TN. Responsibilities include producing design development and construction documents in AutoCAD or Revit from conceptual drawings, assisting in conceptual and schematic design, managing production work with a high level of technical accuracy.
¬
The ideal candidate must have 5+ years of proven experience in all phases of the design process, preferably with multi-family residential and/or mixed-use projects. Must possess a comprehensive understanding of building technology and structures; and have outstanding communication and client interaction skills. Demonstrated problem solving skills and the ability to lead a project team on a complex project or work independently on a small project are required. Proficiency with AutoCad, Revit, InDesign, PhotoShop, SketchUp Pro and Microsoft Office Suite is a must. Degree in architecture required. Architectural license and LEED AP preferred.

This is your opportunity to join a talented team of design professionals. LRK offers professional growth and an excellent benefits package. . . in a friendly, creative, and positive work environment. For more information on LRK, please visit www.lrk.com.

Interested applicants should respond to this posting by submitting a cover letter, resume and three professional references.

EOE





 Rebar Detailer (Pell City, AL)
Nufab Rebar is accepting applications for full time Rebar Detailer to meet our expanding needs in our Alabama Locations. Candidates must have previous AutoCAD/Microstation experience, worked as part of a team in an office environment, able to develop relationships with key customers, be proficient in Microsoft Office applications, and posse's excellent communication and time management skills. Knowledge in 3D modeling in Revit/Tekla or any other modeling product, able to read blueprints, and Rebar experience helpful. Please Email resumes to jstaub at nufabrebar dot com or mail your resume to 144 Thomas Lane, Pell City, AL 35125.


Mechanical Professional Engineer
We are currently accepting resumes for qualified Mechanical Professional Engineers. Minimum of 4+ years of experience required. Project management experience, HVAC design, Military design and CADD/Revit software experience also required. Professional license is required. Please do not apply if you do not possess a current PE license. To be considered forward a copy of your current resume, your salary requirements and if you are willing to relocate/travel or not.



 Bim Modeling/Coordination
I have the ability to do 3D models in AutoCADD or Revit for all disciplines. Offering clash detection or coordination as needed from engineered plans.

Email for further information.


http://boise.craigslist.org

Construction Project Manager/ Assistant Construction Project Manager (Treasure Valley)
PCM is looking to hire a CONSTRUCTION PM or ASSISTANT CONSTRUCTION PM. The candidate MUST have experience in design-build industrial construction. This position may start as part time and ramp up to full time. Potential travel will be required throughout the Northwest along with opportunities for extended duties out of town.

We DON'T build homes, shopping centers, apartments, public works projects, or anything pretty. ALL of our work is heavy industrial. If your work experience does not include industrial construction experience it will not be considered.

Experience with the following is required:

1) Estimating
2) Purchasing
3) Construction Management
4) Change Order Management
5) Billings
6) Safety
7) Project Closeout
8) Customer Service
9) Microsoft Office Documents & Microsoft Project

The following skillsets are of benefit:

1) Design Management
2) Autodesk Software Experience (Autocad, Revit, Inventor, Etc.)
3) Construction Background including performing actual WORK.

Construction Management or Engineering degree preferred.

Employment will be offered to the right candidate after passing a drug and alcohol test, review of driving record, and background check.

Please reply with a copy of your resume with CONSTRUCTION PM or ASSISTANT PM in the subject line.

Every member of our team does whatever it takes to get the job done. This may mean long hours, getting dirty, fabricating, welding, or whatever else is necessary; that just comes with the fun of industrial construction. The right candidate will be excited about that!

Thank You.


http://boston.craigslist.org

Senior HVAC Engineer/Project Manager (Kendall Square)
Cosentini Associates (www.cosentini.com), a Tetra Tech company, is seeking a Senior Mechanical Engineer/Project Manager to join our renowned design team. Cosentini is an international engineering firm specializing in building systems design for a range of projects, including office buildings, academic buildings, laboratories, hotels, and residential buildings, high- and low-rise, new and renovations.

About this opportunity:
As a Senior Mechanical Engineer at Cosentini, you will have the opportunity to apply your design expertise on exciting and challenging projects. You will have a change to mentor and impart knowledge to junior engineers and designers. At the same time, you will be working with some of the top engineers in the field, gaining additional expertise and building your reputation and career. As a Project Manager, you will be managing signature projects involving innovative solutions to complex building challenges.

What's so great about this job?
This is a terrific opportunity to perform innovative HVAC design on signature building systems projects in the US and internationally. We are also working on "green" design of buildings such that, through sustainable design, they have the potential to generate more energy than they consume. This unique position offers career challenge, advancement opportunities, and provides access to a market-leading compensation and benefits package.

What kind of candidate are we looking for?
We are seeking a talented and highly motivated engineer with a B.S. in Mechanical Engineering with a minimum of 10 years of experience, in the design of building systems for commercial and institutional building design including office buildings, academic buildings, laboratories, hotels, and residential buildings, high-and low-rise, new and renovations. PE license preferred. Working knowledge of AutoCAD and Revit preferred. Experience with LEED® process a plus. Project and client relationship management experience is highly desired. To be successful, candidate must have excellent technical skills, communication and interpersonal skills, and business acumen.

Why join Cosentini?
Cosentini Associates provides the following engineering services: HVAC, Electrical Power, Fire Protection, Plumbing, Energy Conservation and Sustainable Design, Commissioning, Code Consulting and Construction Administration Services. We have a reputation for innovative design in the global design and construction industry. As part of the Tetra Tech family of companies, we are home to some of the best minds in the country, including nationally renowned subject matter experts. Tetra Tech employs approximately 13,000 people with more than 330 offices worldwide.

Cosentini Associates/Tetra Tech is an equal opportunity employer. We invite resumes from all interested parties including, women, minorities, veterans, and persons with disabilities.



 Architect - Project Manager (Boston, MA)
Fletcher Thompson provides innovative and responsive design solutions to prestigious clients in the Education, College/University, Business & Industry, Government and Healthcare sectors. Fueled by several major -based projects, we have immediate openings in our Boston office. We need an ambitious and capable Project Manager and a Project Architect both with 10+ yrs. K-12 exp.; with strong technical skills & experience in the design, production and coordination of quality construction documents & presentations. An architectural degree and strong REVIT skills are required.


CAD Drafter MEP,FP (Northshore)
Mechanical, Plumbing, Fire Protection and Electrical Engineering Firm is seeking to fill a position as a Autocad/Revit Draftsperson.

As a drafter you will be drawing HVAC, Electrical, Plumbing and Fire Protection systems from engineer's marked up drawings. Other responsibilities include keeping company drafting standards, monitoring plotting/printing equipment, printing documents for project submissions.

Requirements and Responsibilities:
• Must have a minimum 1 year of drafting experience in the MEP Engineering field.
• Proficient with Autocad 2010 and higher
• Experience with 3D software packages (Autocad MEP and Revit )
• Must be able to work independently and produce Autocad drawings from Engineers markups and sketches in a timely manner.
• Experience doing coordination drawings is a plus.
• Must be able to work on multiple tasks at one time.

Company offers full benefits and competitive salary
Salary range is $14-$18/Hr based on experience


Electrical Designers (Boston)
Electrical Designers

Our engineering firm provides HVAC, Plumbing, Fire Protection, Electrical Engineering and Code Consulting services to some of the region's leading businesses and institutions.
The successful candidate will support the lead electrical engineer on projects in producing construction documents. Responsibilities include design and layout of lighting and receptacle devices, fire alarm design, electrical calculations as well as coordinating with architectural components. AS/BSEE and a minimum of 2 years relevant experience are required. The candidate should be proficient in AutoCAD, MS Word and Excel. REVIT MEP experience is a plus.



 Electrical Engineer - Entry Level (Kendall Square)
Cosentini Associates (www.cosentini.com), a Tetra Tech company, is seeking an entry-level Electrical Engineer to join our renowned design team in our Cambridge office. Cosentini is an international engineering firm specializing in building systems design for a range of projects. Projects include commercial and institutional buildings including office buildings, multi-family residential, laboratories, academic buildings, and government facilities with a focus on energy conscious design.

About this opportunity:
As an entry-level Electrical Engineer at Cosentini, you will have the opportunity to apply your design expertise on exciting and challenging projects. You will have the chance to be mentored by some of the top engineers in the field, gaining additional expertise and building your reputation and career.

What's so great about this job?
This is an excellent opportunity to gain experience designing energy efficient and sustainable systems for innovative building projects. This position offers career challenge and growth and provides access to a market-leading compensation and benefits package.

What kind of candidate are we looking for?
We are seeking a talented and highly motivated engineer with a B.S. in Electrical Engineering. To be successful, candidate must have excellent technical skills, be well versed in AutoCAD, and have strong communication and interpersonal skills. A working knowledge of Revit is preferred, but not required.

Why join Cosentini?
Cosentini Associates provides the following engineering services: HVAC, Electrical Power, Fire Protection, Plumbing, Specialty Lighting, Energy Conservation and Sustainable Design, Commissioning and Construction Administration Services. We have a reputation for innovative design in the global design and construction industry. As part of the Tetra Tech family of companies, we are home to some of the best minds in the country, including nationally renowned subject matter experts. Tetra Tech employs approximately 13,000 people with more than 330 offices worldwide.

Cosentini Associates/Tetra Tech, Inc. is an equal opportunity employer. We invite resumes from all interested parties including, women, minorities, veterans, and persons with disabilities.



 Structural Engineers (Braintree, MA)
Veitas & Veitas Engineers is a full service structural engineering firm located on the South Shore of Boston with nearly five decades of successful projects in both the United States and foreign countries. Projects range from office buildings, multi-family housing, schools, retail centers, hospitals, renovations and additions, and industrial buildings. The firm has built an enviable reputation for its expertise and innovative design solutions.

Veitas & Veitas Engineers is currently seeking a structural engineer candidate (PE license desired). Qualified candidates with 5 years of experience should possess a Bachelors Degree in Civil Engineering (Masters Degree is preferred) with sound knowledge of structural engineering fundamentals in concrete, steel and wood. Proficiency in Ram Structural Systems and other related structural engineering software, AutoCAD/Revit, is preferred. Candidates must be highly motivated with excellent written and verbal skills.

At Veitas & Veitas Engineers we offer our full time employees excellent salaries and benefit packages that include:

• Medical and dental insurance
• Long term & short term disability insurance
• Life insurance
• 401k package
• Paid vacations and holidays

Interested candidates please email resume to rimas@veitas.com



 Architectural Planner (Boston)
Payette has an opening for an Architectural Planner to work with the project teams designing complex healthcare, science, research, and educational facilities. The Architectural Planner will meet with clients to help determine space planning needs.

Position responsibilities will include:
• Collect, organize, and analyze site and client data for project space requirements and to create reports (using spreadsheets)
• Attend user group meetings with clients to determine data for space planning
• Create case studies from previous projects to help educate clients
• Update planning database with project information for benchmarking purposes
• Create diagrams (adjacency, organizational, functional)

Candidates must have the following qualifications to be considered for the position:
• Bachelor of Architecture degree or a Master of Architecture degree
• At least one year of professional experience
• Planning and programming experience (using spreadsheets)

The ideal candidate will also have:
• Experience in university, healthcare, and/or laboratory design and renovation
• Strong Excel skills plus Microsoft Office Suite, Adobe InDesign, and AutoCAD and/or Revit
• Exceptional organizational skills and follow through
• Excellent written and verbal communications skills of technical information
• Effective listening, interviewing and meeting management skills with clients, consultants and architects
• Innovative problem solving techniques
• Ability to work confidently in a group with all levels of staff and also independently.

Payette is an Equal Opportunity Employer and welcomes diversity in the workplace.

Resumes submitted online will be considered. When applying for this position please upload your portfolio in the "other" documents section. Please note for all documents (resume, cover letter, and portfolio) the maximum files size is 5 MB.

Please apply for this position through the following link.

http://newton.newtonsoftware.com/career/SubmitResume.action?id=8aa0050634f0afa10134f14feb8707d5&source=Craigslist


3D Visualizations Designer (Boston)
Payette is looking for a highly motivated entry-level 3D Visualizations Designer to join our 3D Visualizations Group. This position works closely with architecture teams to study, develop, and present complex design solutions for technical buildings such as research, healthcare and laboratory facilities.

Responsibilities include the opportunity to:
• Create 3D models in AutoCad and Sketchup from 2D drawings, hand sketches and design discussions with project teams.
• Work as main liaison between project teams and 3D group.
• Work with 3D rendering team to address modeling issues and adjust 3D model accordingly.
• Modify and further Sketchup models received from project teams to comply with 3DS Max model requirements.
• Iterate through quick design solutions in 3D to evaluate with project designers.
• Initially be able to examine Revit models to detect 3D modeling issues and edit the Revit model as required by project team.

Candidates must have the following qualifications to be considered for the position:
• A Bachelor of Architecture degree.
• At least one year of AutoCad 2D/3D modeling experience in a firm.
• Expertise in Sketchup.

The ideal candidate will also have:
• Excellent 3D modeling skills with Sketchup.
• Proficiency in reading and understanding architectural drawings.
• Ability to multi-task various projects efficiently and work well under deadlines.
• Ability to learn new modeling tools and techniques as needed.
• Experience in Revit.
• Excellent written and verbal communication skills.

Payette is an Equal Opportunity Employer and welcomes diversity in the workplace.

Resumes submitted online will be considered. When applying for this position please upload your portfolio in the "other" documents section. Please note for all documents (resume, cover letter, and portfolio) the maximum files size is 5 MB.

Please use the following link to apply for this position.

http://newton.newtonsoftware.com/career/SubmitResume.action?id=8aa0050634eb83040134eda1e2444ad2&source=Craigslist


Senior Architect (Boston)
Payette is currently seeking a Senior Level Architect to join its architectural team in the design of complex technical buildings such as research, healthcare, and laboratory facilities from design through construction.

Candidates must have the following qualifications to be considered for the position:
• Bachelor of Architecture degree or a Master of Architecture degree
• At least twelve years of experience
• Experience in university, healthcare and/or laboratory design and renovation
• Computer expertise in AutoCAD and Revit

Other position qualifications include:
• Strong design and graphics skills
• Knowledge of space programming, contract documents (including detailing, specifications, production management, design production), contract administration, and
budgeting
• Excellent written, verbal, and visual communication skills with various levels of individuals including clients, consultants, and architects
• Experience mentoring junior level staff
• Ability to juggle multiple tasks, collaborate on large teams and work well under deadlines
• Registration and LEED accreditation is a plus

Payette is an Equal Opportunity Employer and welcomes diversity in the workplace.

Resumes submitted online will be considered. When applying for this position please upload your portfolio in the "other" documents section. Please note for all documents (resume, cover letter, and portfolio) the maximum files size is 5 MB. The following link should be used when applying for this position.

http://newton.newtonsoftware.com/career/SubmitResume.action?id=8a42a12b34c248690134c9354d3f2a32&source=Craigslist


Junior Designer (Boston)
Payette is currently seeking a Junior Level Architectural Designer to join its team in the design of complex technical buildings such as research, healthcare and laboratory facilities from design through construction.

Candidates must have the following qualifications to be considered for the position:
• Bachelor of Architecture degree or a Master of Architecture degree
• Internship experience in a professional architectural firm
• Experience with AutoCAD

Other position qualifications include:
• Strong design and graphics skills
• Excellent written, verbal, and visual communication skills with various levels of individuals including clients, consultants, and architects
• Ability to juggle multiple tasks, collaborate on large teams and work well under deadlines
• Willingness to learn and use new technologies such as Revit

Payette is an Equal Opportunity Employer and welcomes diversity in the workplace.

Resumes submitted online will be considered. When applying for this position please upload your portfolio in the "other" documents section. Please note for all documents (resume, cover letter, and portfolio) the maximum files size is 5 MB. The following link should be used to apply for this position.

http://newton.newtonsoftware.com/career/SubmitResume.action?id=8aa00506342da990013433f76cc748b2&source=Craigslist




 Architect (Designer) (Boston)
Payette is currently seeking an Architect (Designer) to join its architectural team in the design of complex technical buildings such as research, healthcare and laboratory facilities from design through construction.

Candidates must have the following qualifications to be considered for the position:
• Bachelor of Architecture degree or a Master of Architecture degree
• At least five years of post-graduate experience
• Experience in university, healthcare, or laboratory design and renovation
• Computer expertise in AutoCAD and Revit

Other position qualifications include:
• Strong design and graphics skills
• Knowledge of space programming, contract documents (including detailing, specifications, production management, design production), and contract administration
• Excellent written, verbal, and visual communication skills with various levels of individuals including clients, consultants, and architects
• Ability to juggle multiple tasks, collaborate on large teams and work well under deadlines
• Registration and LEED accreditation is a plus

Payette is an Equal Opportunity Employer and welcomes diversity in the workplace.

Resumes submitted online will be considered. When applying for this position please upload your portfolio in the "other" documents section. Please note for all documents (resume, cover letter, and portfolio) the maximum files size is 5 MB. The following link should be used when applying for this position.

http://newton.newtonsoftware.com/career/SubmitResume.action?id=8a42a12b34c248690134c97f661139ce&source=Craigslist


Civil Engineer (Westford)
LandTech Consultants, a well established and progressive Civil Engineering and Land Surveying firm is looking for an experienced engineer for design and permitting of private and public projects. The successful individual will have a minimum of three years experience in drainage, site and subdivision design and grading, septic system design, environmental permitting and client representation. Candidate must have experience with a minimum of HyrdoCAD and AutoCAD Civil 3D (preferably 2012). EIT and Title 5 soil evaluator certification are required. Knowledge of Revit, Revit M/E/P and 3D Laser Scanning is a definite plus.

Please respond with resume, cover letter and salary requirements. No phone calls will be accepted.


Architectural Surveyor (Cambridge, MA)
National building survey firm seeks reliable individuals with a background in architecture/engineering and/or an interest in documenting the built environment [building floor plans]. Full training on our state-of-the-art system is provided. Must be capable of working independently and be able to commute daily to a Boston, Massachusetts area college campus. This is a minimum three month assignment, and would begin in January 2012. A degree in architecture or engineering is required, and knowledge and experience with either AutoCAD and/or Revit would be considered favorable for extended or full time employment.


http://buffalo.craigslist.org

Senior Structural Engineer (Rochester, NY)
Ravi Engineering & Land Surveying, P.C. is seeking a licensed Structural Engineer with experience in Building Projects. This individual will be responsible for technical direction and project management including development of structural concepts, strategies, designs, drawings, specifications and reports. Individual must be able to work independently and in teams, and be able to interface with clients and architects. Autocad experience is essential. Revit experience, as well as project history using computer analysis software is a plus. A Bachelor's degree and minimum of 8-10 years of experience working at an A/E consulting firm preferred. Our benefits include health, dental and vision insurance, professional development, paid time off and a 401k plan. Ravi Engineering & L.S., P.C. is an Equal Opportunity Employer.

http://burlington.craigslist.org

Interior Designer
MorrisSwitzer~Environments for Health, focused exclusively in the healthcare market, is seeking interior designers at several levels in our Vermont, Boston, and Maine offices. Our award-winning experience includes new construction and renovation projects ranging from clinics to community hospitals to major medical centers, as well as the full continuum of senior living communities.
4-year Interior Design degree required, Healthcare design experience required, Minimum 5 years of experience in conceptual design and construction documents preparation, NCIDQ certification preferred, REVIT experience preferred, Strong communication & problem-solving skills required
Interested candidates send cover letter and resume.
www.morrisswitzer.com



http://chambana.craigslist.org

No item elements found in rss feed.

http://charleston.craigslist.org

Mechanical Professional Engineer (Charleston Area)
We are currently accepting resumes for qualified Mechanical Professional Engineers. Minimum of 4+ years of experience required. Project management experience, Military design and CADD/Revit software experience also required. Professional license required. To be considered forward a copy of your current resume, your salary requirements and if you are willing to relocate/travel or not.

http://charlotte.craigslist.org

Engineer's needed (Charlotte and surronding communites)
Local Construction Management firm is need of MEP, Civil and Structural Engineer's. Must have experience in residential or commercial properties. Must have knowledge of AutoCad would prefer some knowledge Revit (BIM). Will consider new companies that have the desire to grow. Can call for details (704) 900-1614.


http://chicago.craigslist.org

Architectural Cad Draftperson (Northwest IN.)
We are a small architectural firm looking for a cad draftperson with Autocad, Revit, Photoshop and Microsoft Office experience. Candidate must have commercial architecture experience. Pay would be $12.00/hr - $15.00/hr depending on experience. Expect 40-50 hours a week working on various commercial projects. Please submit your resume and references.


Interior Architect (Chicago)
Architect/Interior Designer
Epstein is an established and well respected 90 year old Architecture, Engineering, Interior Design and Construction firm. We are seeking an Architect/Designer with experience working with multi-disciplined architectural and engineering teams to join our Interiors Group. Our beautiful corporate office is located in Chicago's West Loop, convenient to transportation. We offer all employees excellent wages and a competitive benefits package. Epstein is proud to be 100% employee owned.

This role fully understands the requirements of the architectural/design process, and performs a broad range of assignments. Assignments include the development of design concepts, architectural plans, programming, space planning, renderings and three-dimensional models, the development of construction documents and selection of furniture/finishes. This position often works closely with the Project Architect or Senior Designer and may supervise staff in the course of a project to ensure the efficient completion of project deliverables.

Our beautiful corporate office is located in Chicago's West Loop, convenient to transportation. We offer all employees excellent wages and a competitive benefits package. Epstein is proud to be 100% employee owned.

The ideal candidate will have 5-7 years of experience as an architect and/or interior designer preferably for large scale projects. An accredited Degree in Architecture or Interior Design is required. Revit proficiency is essential. LEED accreditation is preferred. All applicants must have technical knowledge of working/construction documents and a familiarity with local building codes. This position will be interacting with clients and contractors on a daily basis so communication skills are extremely important. The candidate must have a strong work ethic, a relentless drive to fulfill commitments, and tremendous enthusiasm.

General Responsibilities
1. Assumes a lead role in the development of project goals into design solutions. Works with the project team to generate and present design options and recommendations.
2. Prepare architectural plans, renderings and three dimensional models primarily using computer aided drafting techniques and, occasionally, manual drafting techniques.
3. Develops construction documents.
4. Prepares architectural details and exercises judgment in selection of materials and adaptations of alternates.
5. Manages project activities in accordance to the project plan.
6. Reviews shop drawings for compliance with contract documents.
7. Assists in design presentations and business development efforts.

This is a great opportunity for an individual who wants to join a strong, successful and highly respected team. Our environment thrives on versatile, quality driven, multi-task oriented employees with excellent organizational, communication and problem solving skills.

Epstein is an Equal Opportunity Employer.

To learn more about Epstein, please go to our website www.epsteinglobal.com and to apply for this position, please click here http://sj.tbe.taleo.net/SJ1/ats/careers/requisition.jsp?org=EPSTEIN&cws=1&rid=312



 Interior Design Coordinator (Lakeview)
Environs Development, a prominent Lincoln Park residential developer / builder, seeks a Design Coordinator to guide our luxury home buyers through the interior finish selection process. We have been building high-end single family homes in Lincoln Park, Lakeview and Bucktown since 1991. Our business philosophy provides our clients with a team comprised of architects, interior designers and construction experts to build the finest luxury homes in Chicago. Please visit our website at www.environsdevelopment.com to see examples of our past work.

The ideal candidate will posses the following qualifications / skills:
* Four year degree in interior design , architecture or related studies;
* Minimum five years experience working on residential design projects;
* Strong knowledge of current fixtures, finishes and design trends;
* Understanding of the unique aspects of urban residential design styles ranging from ultra contemporary to classic traditional;
* Comfort level with computer skills and software including experience with Revit drawing system
* and perhaps most importantly, the diplomatic skills of Hillary Clinton;

This is a permanent, full time role with benefits. Please send us your resume, examples of your design work and a short explanation on why you are the ideal candidate to help our firm.



 HVAC / Mechanical Systems Designer/Detailer (NW Suburb)
Well-established Chicagoland mechanical contracting/design firm is accepting applications for a full-time 3D CAD drafter/designer.
Preferred candidates will have 5+ years of experience in design and construction coordination of HVAC piping and/or ductwork systems.
Proficiency with AutoCAD MEP (3D) is required. REVIT MEP or 3rd party BIM package experience is a plus.

We offer competitive salary with benefits including life and medical insurance, 401k plan, and opportunities for growth.

Candidate must have:
- 3+ years of mechanical/ventilation/piping design and detailing experience.
- Working knowledge of local HVAC codes.
- Strong background in AutoCAD. AutoCAD MEP or BIM software.

Recruiters, please do not contact this job poster.

Compensation: Based on Experience
· Principals only. Recruiters, please don't contact this job poster.
· Please, no phone calls about this job!
· Please do not contact job poster about other services, products or commercial interests.



 3D BIM/CAD Modeler (Chicago)
Company Overview

We are a unique outsourcing company that provides professional BIM/CAD modeling services for the architecture, engineering, and construction (AEC) industries. Our clients deem us as innovative partners and depend on us to assist with two issues: ongoing project development and continuing technology education.

Due to our current growth, we are looking for a modeling professional with minimum two years of experience to join our team. This person must also have field experience involving a trade, i.e. Electrical, HVAC, Plumbing, etc. We are considering candidates who are self-directed and passionate about providing the level of service our clients have come to expect from us.

The ideal candidate will be enthusiastic, possess a good work ethic, and be able to accomplish tasks with minimum direction. Extra hours to meet project deadlines may be needed; the candidate will be expected to assist where necessary.

To Qualify:

• Proficiency in Autodesk AutoCAD MEP®
• Proficiency in Autodesk Navisworks®
• Knowledge of Autodesk Revit MEP® a plus
• Knowledge of MAP CAD-Duct/Mech/Elec® a plus

Responsibilities:

• Use AutoCAD MEP® for 3D modeling and coordination
• Run collision reports using Navisworks
• Complete miscellaneous CAD tasks with AutoCAD
• Work with Revit MEP to create engineering documents and/or content

Education:

• Bachelor's Degree or equivalent, or comparable work experience


Arch I (Chicago)
Epstein is an established and well respected 90 year old Architecture, Engineering and Construction firm. We are seeking an Architect with experience working with multi-disciplined architectural, engineering, and design/build teams. The Arch I is an entry level position responsible for architectural assignments that involve the basics of architecture, working from the direction of the Project Architect or Senior Design Architect. Assignments include the development of architectural plans, renderings, and three-dimensional models and related work tasks based on the different phases of the architectural process. The Arch I is expected to provide an increasing level of input to the architectural process. Our beautiful corporate office is located in Chicago's West Loop, convenient to transportation. We offer all employees excellent wages and a competitive benefits package. Epstein is proud to be 100% employee owned.

The ideal candidate will have 1-3 years of experience as an architect preferably for large industrial projects. Experience in manufacturing, food processing, and distribution warehouse projects is a plus. Experience on International projects is also a plus. A Masters Degree in Architecture is required. Revit proficiency is essential. The candidate must have a strong work ethic, a relentless drive to fulfill commitments, and tremendous enthusiasm.

General Responsibilities
1. Prepare architectural plans, renderings and three dimensional models primarily using computer aided drafting techniques and, occasionally, manual drafting techniques.
2. Assist in the development of construction documents under the supervision of the Project Architect or Arch III.
3. Develop architectural solutions to problems of low complexity independently; work closely with senior architects to develop architectural solutions for more difficult problems.
4. Assists in design presentations and business development efforts.

This is a great opportunity for an individual who wants to join a strong, successful and highly respected team. Our environment thrives on versatile, quality driven, multi-task oriented employees with excellent organizational, communication and problem solving skills.

Epstein is an Equal Opportunity Employer.

To learn more about Epstein, please go to our website www.epsteinglobal.com and to apply for this position, please click here http://sj.tbe.taleo.net/SJ1/ats/careers/requisition.jsp?org=EPSTEIN&cws=1&rid=308



 Electrical Engineers (Naperville, IL)
Electrical engineer with 5-10 years of experience designing lighting, power, fire alarm and specialty systems (communication, telephone, security, etc.) for commercial, retail, industrial, educational and health care projects. PE license or ability to obtain license within 1 year a must. NCEES record and multiple state licenses a plus. Must have familiarity with building codes, particularly Chicago Building Code and be AutoCad proficient. REVIT a plus.




 Position: Architect (Lincolnshire)
Position: Architect

Commercial architectural firm seeks experienced architects.
Responsibilities for this position will include producing complete construction documents, developing projects from schematic design through construction documents, coordination with consultants, contractors and clients. It is critical that applicants be able to establish and maintain project schedules and to effectively communicate with landlords, building department, contractors and consultants. Project types and clients mandate very short time frames for production therefore candidates must be able to succeed in fast paced office environment.

Qualified candidates must have:
§ Minimum 6 years of experience
§ Knowledge of building codes, multiple construction methods and structures
§ Developed detailed and accurate architectural construction documents, including MEP
§ Ability to handle multiple tasks and projects simultaneously
§ Proficiency in AutoCAD (Revit experience a plus)
§ Excellent communication skills

For immediate consideration, please email your resume with salary history to: hr@soosarchitects.com. All resumes will be held in the strictest of confidence. ONLY THOSE RESUMES SUBMITTED WITH SALARY REQUIREMENTS AND SALARY HISTORY WILL BE CONSIDERED.

Email: hr@soosarchitects.com



 Mechanical Engineer (Chicago,IL )
Nationally ranked consulting engineering giant seeks exceptionally talented mechanical engineers at all levels for their Chicago area offices.
Location: Greater Chicago

Title: Mechanical Engineer (all levels)

Requirements:
• BS in Mechanical Engineering
• 2+ years experience with an consulting engineering firm
• Strong oral and written communication skills.
• Experience using Revit MEP highly desired.
• LEED Accredited Professional Preferred.
• EIT Preferred; Licensed Professional Engineer preferred for senior level positions.


Responsibilities:
• Design large-scale, energy efficient projects.
• Prepare permit and constructions documents for mechanical and controls systems.
• Coordinating with architects and other disciplines to provide the best solutions.
• Working both individually and in a team setting.
• Strong focus on sustainability.



 ARCHITECT WANTED (Chicago)
Job offering for architect willing to undertake full range of duties for busy design/build firm in Chicago.

Current Project: Residential Renovation

Beneficial Experience
-Remodeling design and construction
-Residential code compliance for the city of Chicago

Job Duties
-assist in design and space planning
- site visitation
-material specification review
- 4-5 days a week

Skills required
-Degree in Architecture
- 5 years work experience in residential design and renovation
- Proficient in Autocad and 3D software such as Revit, 3DMax, Sketchup
-Experience in preparing construction drawings for renovation projects and new construction.
- Space planning and design
-Highly motivated and willing to finish the job

Please email resume and phone number.

Location: Chicago-River North
Principals only. Recruiters, please don't contact this job poster.
Please do not contact job poster about other services, products or commercial interests.



 Revit Specialists (Near Northwest Suburbs)
REVIT SPECIALISTS

Our national architecture and design firm is expanding its Chicago-based office with several openings for special individuals proficient in Revit 2011. You should enjoy the challenge of developing and managing highly creative prototype concepts for national corporate design projects as well as working on commercial/retail/restaurant programs.

As an award-winning firm with a studio atmosphere, we focus on the professional development of each of our valued staff members. We are seeking talented individuals with an architecture background to work in our established firm located in the near northwest suburbs.

If you are looking for challenge and growth potential in your career, we want to hear from you.

Your credentials should include:
ª Architecture degree from an accredited University (Bachelor required, Masters a plus)
ª Minimum 3 years in production and document coordination in all aspects of project management
ª Minimum 3 years of Revit experience, including Family and Template creation, all gained in a working office environment
ª AutoCAD proficiency
ª Basic plotter operation knowledge required
ª Microsoft Office Suite knowledge, especially Outlook
ª Communication skills, enthusiasm and professional commitment are considered integral to the culture of our firm
ª References required

Please forward a cover letter with your resume. While ideally we would like to acknowledge each of you who takes time to respond to this posting, it is not feasible due to the volume of submissions.

Candidates will be contacted for interviews. Our firm is an EOE.




MECHANICAL & ELECTRICAL ENGINEERS
We are seeking engineers and project managers with experience in the design of systems for healthcare, educational, hospitality, retail, industrial and church facilities. Our firm specializes in the HVAC, Plumbing, Fire Protection and Electrical design of various types of commercial buildings systems. The ideal candidate is a self starter with the abilty to take a project from inception to completion with minimal guidence.

Candidates should posses a bachelor's degree in engineering, E.I.T or P.E. not required but helpful. Applicants must be proficient in AutoDesk ACAD and/or REVIT. Applicants should have strong verbal and written communication skills and an emphisis on engineering for the construction industry.

We offer a competitive benefit package.



This listing is for a direct position for a Mechanical and Electrical consulting engineering firm located in the northwest suburbs. We are not recruiters.



 revit architect (Mt. Prospect)
Design build outfit looking for production assistance for our design division. We are seeking talented associate architects with experience in commercial/retail projects, to work in our firm located in the northwest suburbs.
Your credentials should include:
ª Architecture degree from an accredited university (Bachelor required, Masters a plus)
ª Minimum 3 years through 10 years experience in production and document coordination in all aspects of project management
ª Commercial, Restaurant and retail architectural experience preferred
ª Revit required, AutoCAD optional, proficiency in computer generated rendering and animation a plus
ª Communication skills, enthusiasm and professional commitment is considered integral to the way we value client relationships
ª References required
Qualified candidates should forward their resume along with work samples or portfolio and compensation requirements.



http://chico.craigslist.org

No item elements found in rss feed.

http://cincinnati.craigslist.org

No item elements found in rss feed.

http://cleveland.craigslist.org

Electrical Designer job #2699 (Akron/Canton, Ohio)
Electrical Designer job #2699 Akron/Canton, Ohio

Compensation: $36,000 - $54,000 per year (depending on skill level).

Local Northeast Ohio Consulting Firm is seeking an Electrical Designer to fill a Permanent, Full-Time position.

Requirements:

• Must have experience working for an Engineering Consulting or A & E Consulting Firm.
• Must be proficient with AutoCAD 2009 -- 2012
• Must have 5-10 yrs developing electrical details & design electrical power distribution (120 & 240 Volts), lighting, fire & security systems, paging, intercom & low voltage data systems.
• Must be familiar with Electrical Symbols & NEC
• Single Line Diagrams
• Must have a thorough knowledge of how drawings should look, line weights, layers etc. . .
• Prefer someone who has done this for a variety of types of facilities (commercial, industrial, educational, health care etc. . .)
• Prefer an Associates Degree or CAD Certificate but not a must
• Must be interested in a Direct position from day one or after fulfilling contract obligations to the agency
• Able to work as part of a team
• Follow directions from Engineers & Team Leader/s
• Good communication skills
• Able to Pass a background check
• Able to Pass a drug screen

Plusses:

§ Revit 3-D
§ AutoCAD 3-D
§ High Voltage experience

Compensation: $36,000 - $54,000 per year (depending on skill level).

You must reference Electrical Designer job #2699 when applying to this position and email your resume to: resumes@integrityjobs.com.

Due to the large amount of resumes we expect to receive; only the most qualified candidates will be contacted. We will retain all other resumes for any future job considerations.

Integrity Technical Services, Inc. does not charge a fee for finding anyone a job.

Please visit our website to view all of our open positions at: www.integrityjobs.com

Integrity Technical Services, Inc.
14 Whitehall Drive Suite 102
Akron, Ohio 44278

Toll Free: 1-888-262-3226
Akron: 330-633-6500 Cleveland: 440-257-3232

www.integrityjobs.com email: resumes@integrityjobs.com


CAD Drafter/Designer (Lake County OH)
Lake County manufacturing company looking for CAD Drafter/Designer with Revit experience.
Position will support the manufacturing effort by developing shop drawings from outside Architectural documents.


Mechanical Engineer/Project Manager Job #2851 (Akron/Canton, Ohio)
Mechanical Engineer/Project Manager Job #2851 Akron/Canton, Ohio

Compensation: $20.00 - $36.00 per hour.

An expanding A&E consulting firm is seeking an individual to do mechanical engineering project management work. The firm is open to candidates that have 5 -- 20 years experience. They may consider someone with less than 5 years but they must be Go-Getter and impress the hiring mgr that they could learn quickly.

Position Requirements:

• BSME + P.E. (or very close to obtaining it)
• Must have some experience doing project management work for HVAC, Piping, Process Piping, Plumbing, for facilities. Strongly prefer someone with medical gas & piping exp.
• Experience working with one or more of these types of facilities: Medical, Institutional, Institutional, Commercial, Industrial, Correctional
• Must be proficient with AutoCAD.
• Candidates will only be considered if they have professional experience doing Project Management level work.
• Able to perform all related calculations.
• Strong Communication skills are extremely important.
• Experienced candidates MUST have working experience in a consulting environment and understand what traits go along with this type of industry.
• Able to work on multiple projects as clients needs change and project deadlines have to be met.
• Proficiency with Revit MEP would be a plus.

Compensation: $20.00 - $36.00 per hour.

You must reference Quality Mechanical Engineer/Project Manager Job #2851 when applying to this position and email your resume to: resumes@integrityjobs.com.

Due to the large amount of resumes we expect to receive; only the most qualified candidates will be contacted. We will retain all other resumes for any future job considerations.

Integrity Technical Services, Inc. does not charge a fee for finding anyone a job.

Please visit our website to view all of our open positions at: www.integrityjobs.com

Integrity Technical Services, Inc.
14 Whitehall Drive Suite 102
Akron, Ohio 44278

Toll Free: 1-888-262-3226
Akron: 330-633-6500 Cleveland: 440-257-3232

www.integrityjobs.com email: resumes@integrityjobs.com


Architectural Drafter job #2691 (Cleveland, Ohio)
Architectural Drafter job #2691 Cleveland, Ohio

Compensation: $18.00 - $22.00 per hour.

Local Cleveland manufacturer has an immediate need for an Architectural Drafter.

Requirements:

• Hands-on experience using Revit in any general architectural application is a must.
• Must be able to generate 3D views of diverse types of facilities.
• No design capabilities / experience required but architectural degree is ideal.
• Revit skills should include the ability to demonstrate functionality to others.

Compensation: $18.00 - $22.00 per hour.

You must reference Architectural Drafter job #2691 when applying to this position and email your resume to: resumes@integrityjobs.com.

Due to the large amount of resumes we expect to receive; only the most qualified candidates will be contacted. We will retain all other resumes for any future job considerations.

Integrity Technical Services, Inc. does not charge a fee for finding anyone a job.

Please visit our website to view all of our open positions at: www.integrityjobs.com

Integrity Technical Services, Inc.
14 Whitehall Drive Suite 102
Akron, Ohio 44278

Toll Free: 1-888-262-3226
Akron: 330-633-6500 Cleveland: 440-257-3232

www.integrityjobs.com email: resumes@integrityjobs.com


Electrical Project Engineer job #2721 (Cleveland/Akron, Ohio)
Electrical Project Engineer job #2721 Cleveland/Akron, Ohio

Salary Range: $50K - $80K

Requirements:

• BSEE, EIT + PE / PE is Desired but not required (May consider candidate without PE) license as long as the have strong CAD Design skills.
• Must be proficient with AutoCAD or Revit or other BIM software
• Must have experience working for a consulting firm (A&E or just E)
• Prefer someone with a minimal of 5 years experience doing Engineering & Design of Power Distribution & Lighting.
• Prepare project deliverables ensuring compliance with all company, client and industry standards for commercial and retail building construction projects
• Able to perform related calculations
• Able to work as integral part of a team.

Must have strong communication skills, detail oriented, organized

Must pass background check and drug screen

Work environment is Casual (Dockers and dress shirt / tie not necessary)

Salary Range: $50K - $80K

You must reference Electrical Project Engineer job#2721 when applying to this position and email your resume to: resumes@integrityjobs.com.

Due to the large amount of resumes we expect to receive; only the most qualified candidates will be contacted. We will retain all other resumes for any future job considerations.

Integrity Technical Services, Inc. does not charge a fee for finding anyone a job.

Please visit our website to view all of our open positions at: www.integrityjobs.com

Integrity Technical Services, Inc.
14 Whitehall Drive Suite 102
Akron, Ohio 44278

Toll Free: 1-888-262-3226
Akron: 330-633-6500 Cleveland: 440-257-3232

www.integrityjobs.com email: resumes@integrityjobs.com


Electrical Engineer Job #2822 (Akron/Canton, Ohio)
Electrical Engineer Job #2822 Akron/Canton, Ohio

Compensation: $20.00 - $30.00 per hour.

An expanding consulting firm in the Akron/Canton area is seeking an individual to perform electrical engineering work. The firm is open to candidates that have design experience and engineering experience if they are working towards their BSEE or BSEET.

Requirements:

• A BSEE or working towards obtaining it (will look at individuals with 3-10 years of experience doing electrical engineering for a consulting firm).
• Must have some experience doing Power Distribution & Lighting engineering for facilities
• Must be proficient with AutoCAD
• Candidates will only be considered if they have the professional ability to handle Project Engineering level work or able to move in to this type of role after a short period
• Strong Communication skills are extremely important
• Experienced candidates MUST have working experience in a consulting environment and understand what traits go along with this type of industry
• Able to work on multiple projects as clients needs change and project deadlines have to be met


Plusses:

• E.I.T. Certified
• PE license
• Proficient with Revit MEP

Compensation: $20.00 - $30.00 per hour.

You must reference Electrical Engineer Job #2822 when applying to this position and email your resume to: resumes@integrityjobs.com.

Due to the large amount of resumes we expect to receive; only the most qualified candidates will be contacted. We will retain all other resumes for any future job considerations.

Integrity Technical Services, Inc. does not charge a fee for finding anyone a job.

Please visit our website to view all of our open positions at: www.integrityjobs.com

Integrity Technical Services, Inc.
14 Whitehall Drive Suite 102
Akron, Ohio 44278

Toll Free: 1-888-262-3226
Akron: 330-633-6500 Cleveland: 440-257-3232

www.integrityjobs.com email: resumes@integrityjobs.com


Electrical Designer job #2699 (Akron/Canton, Ohio)
Electrical Designer job #2699 Akron/Canton, Ohio

Compensation: $36,000 - $54,000 per year (depending on skill level).

Local Northeast Ohio Consulting Firm is seeking an Electrical Designer to fill a Permanent, Full-Time position.

Requirements:

• Must have experience working for an Engineering Consulting or A & E Consulting Firm.
• Must be proficient with AutoCAD 2009 -- 2012
• Must have 5-10 yrs developing electrical details & design electrical power distribution (120 & 240 Volts), lighting, fire & security systems, paging, intercom & low voltage data systems.
• Must be familiar with Electrical Symbols & NEC
• Single Line Diagrams
• Must have a thorough knowledge of how drawings should look, line weights, layers etc. . .
• Prefer someone who has done this for a variety of types of facilities (commercial, industrial, educational, health care etc. . .)
• Prefer an Associates Degree or CAD Certificate but not a must
• Must be interested in a Direct position from day one or after fulfilling contract obligations to the agency
• Able to work as part of a team
• Follow directions from Engineers & Team Leader/s
• Good communication skills
• Able to Pass a background check
• Able to Pass a drug screen

Plusses:

§ Revit 3-D
§ AutoCAD 3-D
§ High Voltage experience

Compensation: $36,000 - $54,000 per year (depending on skill level).

You must reference Electrical Designer job #2699 when applying to this position and email your resume to: resumes@integrityjobs.com.

Due to the large amount of resumes we expect to receive; only the most qualified candidates will be contacted. We will retain all other resumes for any future job considerations.

Integrity Technical Services, Inc. does not charge a fee for finding anyone a job.

Please visit our website to view all of our open positions at: www.integrityjobs.com

Integrity Technical Services, Inc.
14 Whitehall Drive Suite 102
Akron, Ohio 44278

Toll Free: 1-888-262-3226
Akron: 330-633-6500 Cleveland: 440-257-3232

www.integrityjobs.com email: resumes@integrityjobs.com


Architectural Drafter job #2691 (Cleveland, Ohio)
Architectural Drafter job #2691 Cleveland, Ohio

Compensation: $18.00 - $22.00 per hour.

Local Cleveland manufacturer has an immediate need for an Architectural Drafter.

Requirements:

• Hands-on experience using Revit in any general architectural application is a must.
• Must be able to generate 3D views of diverse types of facilities.
• No design capabilities / experience required but architectural degree is ideal.
• Revit skills should include the ability to demonstrate functionality to others.

Compensation: $18.00 - $22.00 per hour.

You must reference Architectural Drafter job #2691 when applying to this position and email your resume to: resumes@integrityjobs.com.

Due to the large amount of resumes we expect to receive; only the most qualified candidates will be contacted. We will retain all other resumes for any future job considerations.

Integrity Technical Services, Inc. does not charge a fee for finding anyone a job.

Please visit our website to view all of our open positions at: www.integrityjobs.com

Integrity Technical Services, Inc.
14 Whitehall Drive Suite 102
Akron, Ohio 44278

Toll Free: 1-888-262-3226
Akron: 330-633-6500 Cleveland: 440-257-3232

www.integrityjobs.com email: resumes@integrityjobs.com


Mechanical Designer job #2700 (Akron/Canton, Ohio)
Mechanical Designer job #2700 Akron/Canton, Ohio

Compensation: $36,000 - $54,000 per year (depending on experience).

Local Northeast Ohio Consulting Firm is seeking a Mechanical Designer to fill a Permanent, Full-Time position.

Requirements:

• Must have experience working for an Engineering Consulting or A & E Consulting Firm.
• Must be proficient with AutoCAD 2009 - 2012
• Must have 5-10 yrs experience doing design & drafting of Piping, Plumbing, HVAC (Electrical is a huge +) for facilities.
• Must have a thorough knowledge of how drawings should look, line weights, layers etc. . .a very design savvy person, strong consulting design exp.
• Prefer someone who has done this for a variety of types of facilities (commercial, industrial, educational, health care etc. . .)
• Prefer an Associates Degree or CAD Certificate but not a must
• Must be interested in a Direct position from day one or after fulfilling contract obligations to the agency
• Able to work as part of a team
• Follow directions from Engineers & Team Leader/s
• Good communication skills
• Able to Pass a background check
• Able to Pass a drug screen

Plusses:

§ Revit 3-D
§ AutoPlant 3D
§ PDMS
§ AutoCAD 3-D
§ Fire Suppression Systems
§ Electrical Power Distribution

Compensation: $36,000 - $54,000 per year (depending on experience).

You must reference Mechanical Designer job #2700 when applying to this position and email your resume to: resumes@integrityjobs.com.

Due to the large amount of resumes we expect to receive; only the most qualified candidates will be contacted. We will retain all other resumes for any future job considerations.

Integrity Technical Services, Inc. does not charge a fee for finding anyone a job.

Please visit our website to view all of our open positions at: www.integrityjobs.com

Integrity Technical Services, Inc.
14 Whitehall Drive Suite 102
Akron, Ohio 44278

Toll Free: 1-888-262-3226
Akron: 330-633-6500 Cleveland: 440-257-3232

www.integrityjobs.com email: resumes@integrityjobs.com


Electrical Engineer Job #2822 (Akron/Canton, Ohio)
Electrical Engineer Job #2822 Akron/Canton, Ohio

Compensation: $20.00 - $30.00 per hour.

An expanding consulting firm in the Akron/Canton area is seeking an individual to perform electrical engineering work. The firm is open to candidates that have design experience and engineering experience if they are working towards their BSEE or BSEET.

Requirements:

• A BSEE or working towards obtaining it (will look at individuals with 3-10 years of experience doing electrical engineering for a consulting firm).
• Must have some experience doing Power Distribution & Lighting engineering for facilities
• Must be proficient with AutoCAD
• Candidates will only be considered if they have the professional ability to handle Project Engineering level work or able to move in to this type of role after a short period
• Strong Communication skills are extremely important
• Experienced candidates MUST have working experience in a consulting environment and understand what traits go along with this type of industry
• Able to work on multiple projects as clients needs change and project deadlines have to be met


Plusses:

• E.I.T. Certified
• PE license
• Proficient with Revit MEP

Compensation: $20.00 - $30.00 per hour.

You must reference Electrical Engineer Job #2822 when applying to this position and email your resume to: resumes@integrityjobs.com.

Due to the large amount of resumes we expect to receive; only the most qualified candidates will be contacted. We will retain all other resumes for any future job considerations.

Integrity Technical Services, Inc. does not charge a fee for finding anyone a job.

Please visit our website to view all of our open positions at: www.integrityjobs.com

Integrity Technical Services, Inc.
14 Whitehall Drive Suite 102
Akron, Ohio 44278

Toll Free: 1-888-262-3226
Akron: 330-633-6500 Cleveland: 440-257-3232

www.integrityjobs.com email: resumes@integrityjobs.com


Electrical Project Engineer job #2721 (Cleveland/Akron, Ohio)
Electrical Project Engineer job #2721 Cleveland/Akron, Ohio

Salary Range: $50K - $80K

Requirements:

• BSEE, EIT + PE / PE is Desired but not required (May consider candidate without PE) license as long as the have strong CAD Design skills.
• Must be proficient with AutoCAD or Revit or other BIM software
• Must have experience working for a consulting firm (A&E or just E)
• Prefer someone with a minimal of 5 years experience doing Engineering & Design of Power Distribution & Lighting.
• Prepare project deliverables ensuring compliance with all company, client and industry standards for commercial and retail building construction projects
• Able to perform related calculations
• Able to work as integral part of a team.

Must have strong communication skills, detail oriented, organized

Must pass background check and drug screen

Work environment is Casual (Dockers and dress shirt / tie not necessary)

Salary Range: $50K - $80K

You must reference Electrical Project Engineer job#2721 when applying to this position and email your resume to: resumes@integrityjobs.com.

Due to the large amount of resumes we expect to receive; only the most qualified candidates will be contacted. We will retain all other resumes for any future job considerations.

Integrity Technical Services, Inc. does not charge a fee for finding anyone a job.

Please visit our website to view all of our open positions at: www.integrityjobs.com

Integrity Technical Services, Inc.
14 Whitehall Drive Suite 102
Akron, Ohio 44278

Toll Free: 1-888-262-3226
Akron: 330-633-6500 Cleveland: 440-257-3232

www.integrityjobs.com email: resumes@integrityjobs.com


Electrical Designer job #2699 (Akron/Canton, Ohio)
Electrical Designer job #2699 Akron/Canton, Ohio

Compensation: $36,000 - $54,000 per year (depending on skill level).

Local Northeast Ohio Consulting Firm is seeking an Electrical Designer to fill a Permanent, Full-Time position.

Requirements:

• Must have experience working for an Engineering Consulting or A & E Consulting Firm.
• Must be proficient with AutoCAD 2009 -- 2012
• Must have 5-10 yrs developing electrical details & design electrical power distribution (120 & 240 Volts), lighting, fire & security systems, paging, intercom & low voltage data systems.
• Must be familiar with Electrical Symbols & NEC
• Single Line Diagrams
• Must have a thorough knowledge of how drawings should look, line weights, layers etc. . .
• Prefer someone who has done this for a variety of types of facilities (commercial, industrial, educational, health care etc. . .)
• Prefer an Associates Degree or CAD Certificate but not a must
• Must be interested in a Direct position from day one or after fulfilling contract obligations to the agency
• Able to work as part of a team
• Follow directions from Engineers & Team Leader/s
• Good communication skills
• Able to Pass a background check
• Able to Pass a drug screen

Plusses:

§ Revit 3-D
§ AutoCAD 3-D
§ High Voltage experience

Compensation: $36,000 - $54,000 per year (depending on skill level).

You must reference Electrical Designer job #2699 when applying to this position and email your resume to: resumes@integrityjobs.com.

Due to the large amount of resumes we expect to receive; only the most qualified candidates will be contacted. We will retain all other resumes for any future job considerations.

Integrity Technical Services, Inc. does not charge a fee for finding anyone a job.

Please visit our website to view all of our open positions at: www.integrityjobs.com

Integrity Technical Services, Inc.
14 Whitehall Drive Suite 102
Akron, Ohio 44278

Toll Free: 1-888-262-3226
Akron: 330-633-6500 Cleveland: 440-257-3232

www.integrityjobs.com email: resumes@integrityjobs.com


Architectural Drafter job #2691 (Cleveland, Ohio)
Architectural Drafter job #2691 Cleveland, Ohio

Compensation: $18.00 - $22.00 per hour.

Local Cleveland manufacturer has an immediate need for an Architectural Drafter.

Requirements:

• Hands-on experience using Revit in any general architectural application is a must.
• Must be able to generate 3D views of diverse types of facilities.
• No design capabilities / experience required but architectural degree is ideal.
• Revit skills should include the ability to demonstrate functionality to others.

Compensation: $18.00 - $22.00 per hour.

You must reference Architectural Drafter job #2691 when applying to this position and email your resume to: resumes@integrityjobs.com.

Due to the large amount of resumes we expect to receive; only the most qualified candidates will be contacted. We will retain all other resumes for any future job considerations.

Integrity Technical Services, Inc. does not charge a fee for finding anyone a job.

Please visit our website to view all of our open positions at: www.integrityjobs.com

Integrity Technical Services, Inc.
14 Whitehall Drive Suite 102
Akron, Ohio 44278

Toll Free: 1-888-262-3226
Akron: 330-633-6500 Cleveland: 440-257-3232

www.integrityjobs.com email: resumes@integrityjobs.com


RE Warner Senior and Entry Level Electrical Engineer (Westlake Ohio)
Full time positions

SENIOR ELECTRICAL ENGINEER

Bachelor of Science in Engineering Technology ( BSET ) or Electrical Engineering (BSEE) required. Registered professional engineer preferred. Minimum five years experience in the design and specification of power distribution systems, lighting and specialty systems (communication, life safety), for industrial, commercial and institutional facilities. Experience must include:·

Preparing detailed engineering calculations (short circuit and lighting, arc flash analysis a plus)
Performing engineering-related field tasks at active construction sites or operating facilities
Preparing formal engineering technical reports
Developing equipment specifications, estimates, and bid evaluation·
Serving as discipline lead performing engineering hour estimate and scope of work·
Proficiency in the use of AutoCAD
Proficiency in the use of Word and Excel

ELECTRICAL DESIGNER / ENTRY LEVEL ENGINEER

Associate or accredited bachelors degree tracked in electrical engineering and minimum of two years experience in AutoCAD drafting of electrical drawings. Must be proficient in AutoCAD 2010. Experience in BIM/Revit a plus. Experience must include:

Generation of schematic motor control drawings, wiring diagrams, panel layouts, terminal blocks, bills of materials, one line diagrams and conduit schedules.
Familiarity with electrical codes and standards.
Performance of field surveys as member of team to obtain accurate measurements and equipment data.

Additional career opportunities available.
See our website!
http://www.rewarner.com



 Mechanical Designer job #2700 (Akron/Canton, Ohio)
Mechanical Designer job #2700 Akron/Canton, Ohio

Compensation: $36,000 - $54,000 per year (depending on experience).

Local Northeast Ohio Consulting Firm is seeking a Mechanical Designer to fill a Permanent, Full-Time position.

Requirements:

• Must have experience working for an Engineering Consulting or A & E Consulting Firm.
• Must be proficient with AutoCAD 2009 - 2012
• Must have 5-10 yrs experience doing design & drafting of Piping, Plumbing, HVAC (Electrical is a huge +) for facilities.
• Must have a thorough knowledge of how drawings should look, line weights, layers etc. . .a very design savvy person, strong consulting design exp.
• Prefer someone who has done this for a variety of types of facilities (commercial, industrial, educational, health care etc. . .)
• Prefer an Associates Degree or CAD Certificate but not a must
• Must be interested in a Direct position from day one or after fulfilling contract obligations to the agency
• Able to work as part of a team
• Follow directions from Engineers & Team Leader/s
• Good communication skills
• Able to Pass a background check
• Able to Pass a drug screen

Plusses:

§ Revit 3-D
§ AutoPlant 3D
§ PDMS
§ AutoCAD 3-D
§ Fire Suppression Systems
§ Electrical Power Distribution

Compensation: $36,000 - $54,000 per year (depending on experience).

You must reference Mechanical Designer job #2700 when applying to this position and email your resume to: resumes@integrityjobs.com.

Due to the large amount of resumes we expect to receive; only the most qualified candidates will be contacted. We will retain all other resumes for any future job considerations.

Integrity Technical Services, Inc. does not charge a fee for finding anyone a job.

Please visit our website to view all of our open positions at: www.integrityjobs.com

Integrity Technical Services, Inc.
14 Whitehall Drive Suite 102
Akron, Ohio 44278

Toll Free: 1-888-262-3226
Akron: 330-633-6500 Cleveland: 440-257-3232

www.integrityjobs.com email: resumes@integrityjobs.com


Electrical Project Engineer job #2721 (Cleveland/Akron, Ohio)
Electrical Project Engineer job #2721 Cleveland/Akron, Ohio

Salary Range: $50K - $80K

Requirements:

• BSEE, EIT + PE / PE is Desired but not required (May consider candidate without PE) license as long as the have strong CAD Design skills.
• Must be proficient with AutoCAD or Revit or other BIM software
• Must have experience working for a consulting firm (A&E or just E)
• Prefer someone with a minimal of 5 years experience doing Engineering & Design of Power Distribution & Lighting.
• Prepare project deliverables ensuring compliance with all company, client and industry standards for commercial and retail building construction projects
• Able to perform related calculations
• Able to work as integral part of a team.

Must have strong communication skills, detail oriented, organized

Must pass background check and drug screen

Work environment is Casual (Dockers and dress shirt / tie not necessary)

Salary Range: $50K - $80K

You must reference Electrical Project Engineer job#2721 when applying to this position and email your resume to: resumes@integrityjobs.com.

Due to the large amount of resumes we expect to receive; only the most qualified candidates will be contacted. We will retain all other resumes for any future job considerations.

Integrity Technical Services, Inc. does not charge a fee for finding anyone a job.

Please visit our website to view all of our open positions at: www.integrityjobs.com

Integrity Technical Services, Inc.
14 Whitehall Drive Suite 102
Akron, Ohio 44278

Toll Free: 1-888-262-3226
Akron: 330-633-6500 Cleveland: 440-257-3232

www.integrityjobs.com email: resumes@integrityjobs.com


Electrical Designer job#2699 (Akron/Canton, Ohio)
Electrical Designer job#2699 Akron/Canton, Ohio

Compensation: $36,000 - $54,000 per year (depending on skill level).

Local Northeast Ohio Consulting Firm is seeking an Electrical Designer to fill a Permanent, Full-Time position.

Requirements:

• Must have experience working for an Engineering Consulting or A & E Consulting Firm.
• Must be proficient with AutoCAD 2009 -- 2012
• Must have 5-10 yrs developing electrical details & design electrical power distribution (120 & 240 Volts), lighting, fire & security systems, paging, intercom & low voltage data systems.
• Must be familiar with Electrical Symbols & NEC
• Single Line Diagrams
• Must have a thorough knowledge of how drawings should look, line weights, layers etc. . .
• Prefer someone who has done this for a variety of types of facilities (commercial, industrial, educational, health care etc. . .)
• Prefer an Associates Degree or CAD Certificate but not a must
• Must be interested in a Direct position from day one or after fulfilling contract obligations to the agency
• Able to work as part of a team
• Follow directions from Engineers & Team Leader/s
• Good communication skills
• Able to Pass a background check
• Able to Pass a drug screen

Plusses:

§ Revit 3-D
§ AutoCAD 3-D
§ High Voltage experience

Compensation: $36,000 - $54,000 per year (depending on skill level).

You must reference Electrical Designer job #2699 when applying to this position and email your resume to: resumes@integrityjobs.com.

Due to the large amount of resumes we expect to receive; only the most qualified candidates will be contacted. We will retain all other resumes for any future job considerations.

Integrity Technical Services, Inc. does not charge a fee for finding anyone a job.

Please visit our website to view all of our open positions at: www.integrityjobs.com

Integrity Technical Services, Inc.
14 Whitehall Drive Suite 102
Akron, Ohio 44278

Toll Free: 1-888-262-3226
Akron: 330-633-6500 Cleveland: 440-257-3232

www.integrityjobs.com email: resumes@integrityjobs.com


Architectural Drafter job #2691 (Cleveland, Ohio)
Architectural Drafter job #2691 Cleveland, Ohio

Compensation: $18.00 - $22.00 per hour.

Local Cleveland manufacturer has an immediate need for an Architectural Drafter.

Requirements:

• Hands-on experience using Revit in any general architectural application is a must.
• Must be able to generate 3D views of diverse types of facilities.
• No design capabilities / experience required but architectural degree is ideal.
• Revit skills should include the ability to demonstrate functionality to others.

Compensation: $18.00 - $22.00 per hour.

You must reference Architectural Drafter job #2691 when applying to this position and email your resume to: resumes@integrityjobs.com.

Due to the large amount of resumes we expect to receive; only the most qualified candidates will be contacted. We will retain all other resumes for any future job considerations.

Integrity Technical Services, Inc. does not charge a fee for finding anyone a job.

Please visit our website to view all of our open positions at: www.integrityjobs.com

Integrity Technical Services, Inc.
14 Whitehall Drive Suite 102
Akron, Ohio 44278

Toll Free: 1-888-262-3226
Akron: 330-633-6500 Cleveland: 440-257-3232

www.integrityjobs.com email: resumes@integrityjobs.com


Electrical Project Engineer job #2721 (Cleveland/Akron, Ohio)
Electrical Project Engineer job #2721 Cleveland/Akron, Ohio

Salary Range: $50K - $80K

Requirements:

• BSEE, EIT + PE / PE is Desired but not required (May consider candidate without PE) license as long as the have strong CAD Design skills.
• Must be proficient with AutoCAD or Revit or other BIM software
• Must have experience working for a consulting firm (A&E or just E)
• Prefer someone with a minimal of 5 years experience doing Engineering & Design of Power Distribution & Lighting.
• Prepare project deliverables ensuring compliance with all company, client and industry standards for commercial and retail building construction projects
• Able to perform related calculations
• Able to work as integral part of a team.

Must have strong communication skills, detail oriented, organized

Must pass background check and drug screen

Work environment is Casual (Dockers and dress shirt / tie not necessary)

Salary Range: $50K - $80K

You must reference Electrical Project Engineer job#2721 when applying to this position and email your resume to: resumes@integrityjobs.com.

Due to the large amount of resumes we expect to receive; only the most qualified candidates will be contacted. We will retain all other resumes for any future job considerations.

Integrity Technical Services, Inc. does not charge a fee for finding anyone a job.

Please visit our website to view all of our open positions at: www.integrityjobs.com

Integrity Technical Services, Inc.
14 Whitehall Drive Suite 102
Akron, Ohio 44278

Toll Free: 1-888-262-3226
Akron: 330-633-6500 Cleveland: 440-257-3232

www.integrityjobs.com email: resumes@integrityjobs.com


Architectural Drafter job #2691 (Cleveland, Ohio)
Architectural Drafter job #2691 Cleveland, Ohio

Compensation: $18.00 - $22.00 per hour.

Local Cleveland manufacturer has an immediate need for an Architectural Drafter.

Requirements:

• Hands-on experience using Revit in any general architectural application is a must.
• Must be able to generate 3D views of diverse types of facilities.
• No design capabilities / experience required but architectural degree is ideal.
• Revit skills should include the ability to demonstrate functionality to others.

Compensation: $18.00 - $22.00 per hour.

You must reference Architectural Drafter job #2691 when applying to this position and email your resume to: resumes@integrityjobs.com.

Due to the large amount of resumes we expect to receive; only the most qualified candidates will be contacted. We will retain all other resumes for any future job considerations.

Integrity Technical Services, Inc. does not charge a fee for finding anyone a job.

Please visit our website to view all of our open positions at: www.integrityjobs.com

Integrity Technical Services, Inc.
14 Whitehall Drive Suite 102
Akron, Ohio 44278

Toll Free: 1-888-262-3226
Akron: 330-633-6500 Cleveland: 440-257-3232

www.integrityjobs.com email: resumes@integrityjobs.com


Electrical Designer job#2699 (Akron/Canton, Ohio)
Electrical Designer job#2699 Akron/Canton, Ohio

Compensation: $36,000 - $54,000 per year (depending on skill level).

Local Northeast Ohio Consulting Firm is seeking an Electrical Designer to fill a Permanent, Full-Time position.

Requirements:

• Must have experience working for an Engineering Consulting or A & E Consulting Firm.
• Must be proficient with AutoCAD 2009 -- 2012
• Must have 5-10 yrs developing electrical details & design electrical power distribution (120 & 240 Volts), lighting, fire & security systems, paging, intercom & low voltage data systems.
• Must be familiar with Electrical Symbols & NEC
• Single Line Diagrams
• Must have a thorough knowledge of how drawings should look, line weights, layers etc. . .
• Prefer someone who has done this for a variety of types of facilities (commercial, industrial, educational, health care etc. . .)
• Prefer an Associates Degree or CAD Certificate but not a must
• Must be interested in a Direct position from day one or after fulfilling contract obligations to the agency
• Able to work as part of a team
• Follow directions from Engineers & Team Leader/s
• Good communication skills
• Able to Pass a background check
• Able to Pass a drug screen

Plusses:

§ Revit 3-D
§ AutoCAD 3-D
§ High Voltage experience

Compensation: $36,000 - $54,000 per year (depending on skill level).

You must reference Electrical Designer job #2699 when applying to this position and email your resume to: resumes@integrityjobs.com.

Due to the large amount of resumes we expect to receive, only the most qualified candidates will be contacted. We will retain all other resumes for any future job considerations.

Integrity Technical Services, Inc. does not charge a fee for finding anyone a job.

Please visit our website to view all of our open positions at: www.integrityjobs.com

Integrity Technical Services, Inc.
14 Whitehall Drive Suite 102
Akron, Ohio 44278

Toll Free: 1-888-262-3226
Akron: 330-633-6500 Cleveland: 440-257-3232

www.integrityjobs.com email: resumes@integrityjobs.com


Electrical Project Engineer job#2721 (Cleveland/Akron, Ohio)
Electrical Project Engineer job#2721 Cleveland/Akron, Ohio

Salary Range: $50K - $80K

Requirements:

• BSEE, EIT + PE / PE is Desired but not required (May consider candidate without PE) license as long as the have strong CAD Design skills.
• Must be proficient with AutoCAD or Revit or other BIM software
• Must have experience working for a consulting firm (A&E or just E)
• Prefer someone with a minimal of 5 years experience doing Engineering & Design of Power Distribution & Lighting.
• Prepare project deliverables ensuring compliance with all company, client and industry standards for commercial and retail building construction projects
• Able to perform related calculations
• Able to work as integral part of a team.

Must have strong communication skills, detail oriented, organized

Must pass background check and drug screen

Work environment is Casual (Dockers and dress shirt / tie not necessary)

Salary Range: $50K - $80K

You must reference Electrical Project Engineer job#2721 when applying to this position and email your resume to: resumes@integrityjobs.com.

Due to the large amount of resumes we expect to receive, only the most qualified candidates will be contacted. We will retain all other resumes for any future job considerations.

Integrity Technical Services, Inc. does not charge a fee for finding anyone a job.

Please visit our website to view all of our open positions at: www.integrityjobs.com

Integrity Technical Services, Inc.
14 Whitehall Drive Suite 102
Akron, Ohio 44278

Toll Free: 1-888-262-3226
Akron: 330-633-6500 Cleveland: 440-257-3232

www.integrityjobs.com email: resumes@integrityjobs.com


Architectural Drafter job#2691 (Cleveland, Ohio)
Architectural Drafter job#2691 Cleveland, Ohio

Compensation: $18.00 - $22.00 per hour.

Local Cleveland manufacturer has an immediate need for an Architectural Drafter.

Requirements:

• Hands-on experience using Revit in any general architectural application is a must.
• Must be able to generate 3D views of diverse types of facilities.
• No design capabilities / experience required but architectural degree is ideal.
• Revit skills should include the ability to demonstrate functionality to others.

Compensation: $18.00 - $22.00 per hour.

You must reference Architectural Drafter job #2691 when applying to this position and email your resume to: resumes@integrityjobs.com.

Due to the large amount of resumes we expect to receive, only the most qualified candidates will be contacted. We will retain all other resumes for any future job considerations.

Integrity Technical Services, Inc. does not charge a fee for finding anyone a job.

Please visit our website to view all of our open positions at: www.integrityjobs.com

Integrity Technical Services, Inc.
14 Whitehall Drive Suite 102
Akron, Ohio 44278

Toll Free: 1-888-262-3226
Akron: 330-633-6500 Cleveland: 440-257-3232

www.integrityjobs.com email: resumes@integrityjobs.com


Mechanical Designer job#2700 (Akron/Canton, Ohio)
Mechanical Designer job#2700 Akron/Canton, Ohio

Compensation: $36,000 - $54,000 per year (depending on experience).

Local Northeast Ohio Consulting Firm is seeking a Mechanical Designer to fill a Permanent, Full-Time position.

Requirements:

• Must have experience working for an Engineering Consulting or A & E Consulting Firm.
• Must be proficient with AutoCAD 2009 - 2012
• Must have 5-10 yrs experience doing design & drafting of Piping, Plumbing, HVAC (Electrical is a huge +) for facilities.
• Must have a thorough knowledge of how drawings should look, line weights, layers etc. . .a very design savvy person, strong consulting design exp.
• Prefer someone who has done this for a variety of types of facilities (commercial, industrial, educational, health care etc. . .)
• Prefer an Associates Degree or CAD Certificate but not a must
• Must be interested in a Direct position from day one or after fulfilling contract obligations to the agency
• Able to work as part of a team
• Follow directions from Engineers & Team Leader/s
• Good communication skills
• Able to Pass a background check
• Able to Pass a drug screen

Plusses:

§ Revit 3-D
§ AutoPlant 3D
§ PDMS
§ AutoCAD 3-D
§ Fire Suppression Systems
§ Electrical Power Distribution

Compensation: $36,000 - $54,000 per year (depending on experience).

Must reference Mechanical Designer job #2700 when applying to this position and email your resume to: resumes@integrityjobs.com.

Due to the large amount of resumes we expect to receive, only the most qualified candidates will be contacted. We will retain all other resumes for any future job considerations.

Integrity Technical Services, Inc. does not charge a fee for finding anyone a job.

Please visit our website to view all of our open positions at: www.integrityjobs.com

Integrity Technical Services, Inc.
14 Whitehall Drive Suite 102
Akron, Ohio 44278

Toll Free: 1-888-262-3226
Akron: 330-633-6500 Cleveland: 440-257-3232

www.integrityjobs.com email: resumes@integrityjobs.com


Electrical Designer job#2699 (Akron/Canton, Ohio)
Electrical Designer job#2699 Akron/Canton, Ohio

Compensation: $36,000 - $54,000 per year (depending on skill level).

Local Northeast Ohio Consulting Firm is seeking an Electrical Designer to fill a Permanent, Full-Time position.

Requirements:

• Must have experience working for an Engineering Consulting or A & E Consulting Firm.
• Must be proficient with AutoCAD 2009 -- 2012
• Must have 5-10 yrs developing electrical details & design electrical power distribution (120 & 240 Volts), lighting, fire & security systems, paging, intercom & low voltage data systems.
• Must be familiar with Electrical Symbols & NEC
• Single Line Diagrams
• Must have a thorough knowledge of how drawings should look, line weights, layers etc. . .
• Prefer someone who has done this for a variety of types of facilities (commercial, industrial, educational, health care etc. . .)
• Prefer an Associates Degree or CAD Certificate but not a must
• Must be interested in a Direct position from day one or after fulfilling contract obligations to the agency
• Able to work as part of a team
• Follow directions from Engineers & Team Leader/s
• Good communication skills
• Able to Pass a background check
• Able to Pass a drug screen

Plusses:

§ Revit 3-D
§ AutoCAD 3-D
§ High Voltage experience

Compensation: $36,000 - $54,000 per year (depending on skill level).

Must reference Electrical Designer job #2699 when applying to this position and email your resume to: resumes@integrityjobs.com.

Due to the large amount of resumes we expect to receive, only the most qualified candidates will be contacted. We will retain all other resumes for any future job considerations.

Integrity Technical Services, Inc. does not charge a fee for finding anyone a job.

Please visit our website to view all of our open positions at: www.integrityjobs.com

Integrity Technical Services, Inc.
14 Whitehall Drive Suite 102
Akron, Ohio 44278

Toll Free: 1-888-262-3226
Akron: 330-633-6500 Cleveland: 440-257-3232

www.integrityjobs.com email: resumes@integrityjobs.com


http://columbia.craigslist.org

No item elements found in rss feed.

http://columbus.craigslist.org

Lead Project Architect (Dublin)
In this role, you will be working on architectural designs for our clients. You will be responsible for the production of architectural construction documents on projects requiring intermediate to advanced level experience and design knowledge. Projects are completed in accordance with client requirements, code requirements, standards, and site adjustments. You will be expected to train, assist and provide directions and instruction within your team, as well as share knowledge, in order to produce a complete set of accurate and coordinated architectural construction documents.

Your key learning opportunities will include: working on complex design projects, developing advanced technical knowledge in your discipline; gaining exposure to client relationship management and project management skills; enhancing your competency for managing and training others in your discipline; and working with various clients and projects in all industry segments.

Minimum Experience:

* 4 - year Bachelors of Science degree in Architecture or a 5 - year Bachelors of Architecture (professional) degree from an accredited university (Masters degree preferred)
* 6 -10 years work experience in Architecture and working on production of construction documents
* Professional Registration
* LEED AP (preferred)
* 5+ years experience in project management
* Knowledge of REVIT highly preferred
* Experience working with projects for a variety of clients, such as restaurant, grocery, retail, or petroleum

Click Here to Apply


Electrical Engineer (Dublin)
WD Partners is a growing Architectural and Engineering and Program Management firm providing full architecture and engineering services to food and retail brands. With associates worldwide, and LEED accredited designers, registered architects and engineers licensed in all 50 states, we are looking to expand our capabilities through the addition of talented engineers. We have multiple full-time engineering positions in our headquarters in Columbus, OH.

Responsibilities:

Responsible for collaborating with lead engineers on design efforts from start to finish to ensure compliance with scope budget and schedule. As an Electrical Engineer you will be working within a multi-disciplined team on design, coordination and production of engineering construction and bid documents on complex projects requiring advanced experience and design knowledge.

Requirements:

* A BSEE or equivalent
* Professional Registration (preferred)
* 6-12 years of engineering design experience in commercial buildings, working knowledge of the NEC, power distribution, indoor/outdoor lighting systems design, utility coordination, energy calculations, grounding systems, field surveys, equipment sizing, selection and specification.
* Working knowledge of AutoCAD (REVIT is a plus).
* Experience working in a fast paced environment, and within a multi disciplined A&E team on design, coordination and production of construction and bid documents required.

We offer a competitive salary and a full benefits program. What matters to our associates matters to us, and benefits are at the top of the list. Therefore we offer a competitive salary and a full benefits program. We provide an up-to-date relevant package that encourages associates to live healthy lifestyles, reach financial goals, protect their incomes, and cope with the demands of life at work and at home.

- Medical Insurance (including vision and prescription medication coverage)
- Dental Insurance
- Company Paid Short-Term Disability
- Long-Term Disability Benefits
- Company Paid Life Insurance
- Optional Life Insurance
- AD&D
- Flexible Spending Accounts
- 40lk, including a company match
- Paid Time Off and Paid Company Holidays
- Domestic Partner Benefits
- Parental Leave
- OnsiteFitness Center

Click Here to Apply


Medical Planners (senior-level) (Columbus)
For over 60 years, NBBJ has been recognized as an international leader in healthcare design. The firm has defined the role of architecture in promoting health and healing, influenced the relationship between contemporary medical practice and the patient, and set precedents that have changed the face of healthcare. NBBJ's Healthcare practice is consistently ranked among top five in the world by Modern Healthcare and has collaborated on seven of the top 10 US News and World Report Honor Roll hospitals, including the University of Washington Medical Center, The Cleveland Clinic and Massachusetts General Hospital. The firm has a long-standing history of transformational designs and is dedicated to actively pursuing sustainable solutions that contribute to a more livable world. NBBJ has nine offices worldwide: Columbus, Seattle, San Francisco, Los Angeles, New York, Boston, London, Beijing and Shanghai.

NBBJ Columbus is seeking Lead Medical Planners with experience in the design and planning of large hospitals and the ability to effectively lead Clinical User Group meetings. This is an opportunity to join a fully integrated design studio where Architects work with Interior Designers, Medical Planners, Engineers, and Workplace Specialists from Concept Design through Construction. The skill and ability to work with and integrate into a diverse team of designers would serve the candidate well in our highly collaborative environment.


Skills and Qualifications:

- Bachelor of Architecture Degree (or equivalent) required; Master of Architecture degree preferred
- Architectural License required; LEED Accreditation a plus
- 10+ years medical planning experience on large, complex hospital facilities
- Understanding of programmatically rich healthcare projects from concept design and programming through construction administration
- Experience coordinating and facilitating client user group meetings and developing all related deliverables
- Experience marketing Healthcare projects
- Familiarity with issues surrounding innovative healthcare strategic planning, master planning, and programming
- Ability to lead and manage in-house team of medical planners and coordinate external consultants
- Exceptional written, verbal and graphic communication skills required
- Proficient in Revit with 3D modeling skills preferred
- Knowledge of Photoshop, Illustrator, InDesign, Sketchup, Rhino or 3DS Max desired
- Proficiency in Microsoft Office Suite (Word, Excel, PowerPoint, Outlook)


Please visit http://www.nbbj.com/#join/openings to apply.


NBBJ is an Equal Opportunity Employer.



Lead Project Architect (Dublin, OH)
WD Partners is a growing Architectural and Engineering and Program Management firm providing full architecture and engineering services to food and retail brands. With associates worldwide, and LEED accredited designers, registered architects and engineers licensed in all 50 states, we are looking to expand our capabilities through the addition of talented engineers.

In this role, you will be working on architectural designs for our clients. You will be responsible for the production of architectural construction documents on projects requiring intermediate to advanced level experience and design knowledge. Projects are completed in accordance with client requirements, code requirements, standards, and site adjustments. You will be expected to train, assist and provide directions and instruction within your team, as well as share knowledge, in order to produce a complete set of accurate and coordinated architectural construction documents.

Your key learning opportunities will include: working on complex design projects, developing advanced technical knowledge in your discipline; gaining exposure to client relationship management and project management skills; enhancing your competency for managing and training others in your discipline; and working with various clients and projects in all industry segments.

Minimum Experience:

* 4-year Bachelors of Science degree in Architecture or a 5 - year Bachelors of Architecture (professional) degree from an accredited university (Masters degree preferred)

* 6 -10 years work experience in Architecture and working on production of construction documents

* Professional Registration

* LEED AP (preferred)

* 5+ years experience in project management

* Knowledge of REVIT highly preferred

* Experience working with projects for a variety of clients, such as restaurant, grocery, retail, or petroleum

Click Here to Apply


MEP Designer (Columbus, OH)
We are looking for a MEP Designer for and Engineering Office that is skilled in AutoCAD

We are a full service Consulting Engineering company providing HVAC, electrical, and plumbing engineering located in the Arena District.

Primary job responsibilities:
-Design/Draft MEP plans and documents
-Perform site visits and surveys of existing facilities


Minimum Requirements:
- Ability to design basic engineering systems with little to no supervision and more complex systems with some supervision.
-Minimum 5 years of related work experience. Architectural drafters will NOT be considered.
-Familiar with Microsoft Office Suite products
-Proficient in CAD software such as AutoCAD. Revit experience is a plus.
-Enthusiastic team player and productive self-driven professional
-Excellent verbal and written communication skills



To be immediately considered for this exceptional opportunity email your resume to us.



 Project Architect (Downtown Columbus)
Our focus is Prototype and Roll-out documents in the Retail, Restaurants and Day Care fields.

Looking for candidates with experience in our practice focus, as well as experience in Airport related projects.

Project Architect with minimum of 5 years of relevant experience and with hands-on management of multiple projects, good communication skills and coordination of project consultants. This position requires proficiency in AutoCAD, Microsoft Word, Excel. Revit is a plus.

Benefits included for this position include: company paid health and dental insurance, a life insurance policy and free parking.

Please submit resumes directly to this ad.




 Architect (Cleveland)
Positions open in our Cleveland and Fort Lauderdale offices.

Our focus is senior living communities, wellness, specialty healthcare, residential, and affordable housing.

Looking for candidates with experience in our practice focus, as well as in the design of country clubs, community clubhouse buildings, hospitality amenity spaces, and multi-family residential projects.

Senior Project Manager with 15 years of experience with hands-on management of multiple projects. Must have a strong technical background, ability to oversee and serve as project go-to person.

Project Architect with minimum of 10 years of relevant experience and proficiency in AutoCAD, Photoshop, InDesign, Illustrator, Sketch-Up, Microsoft Word, Excel. Revit is a plus.

Senior Design Architect experienced in our focus area and the other building types listed above, - as well as Interior Architecture.

Interior Designer with strong portfolio of interiors for our focus area and the other building types listed.

These positions are for candidates with special talents and a depth of expertise and experience. A collaborative bent and good communication skills are necessary. We have a growing list of unique projects that also require master planning for both new projects and repositioning.

Please submit a portfolio of your work and a document indicating the degree of responsibility for the projects in which you have been involved. Any sketches or renderings should be products that were specifically prepared by the applicant.

Please submit resumes to HR@ccharch.com

C.C.Hodgson Architectural Group
Cleveland Fort Lauderdale Washington DC

http://dallas.craigslist.org

Civil Engineering, MEP, Landscape Architecture (Mansfield, Texas)
Bannister Engineering, LLC is an established DFW area firm offering civil engineering, landscape architecture, land planning, and MEP design services. Our current staff consists of 9 people, including five licensed engineers (PE's), one registered landscape architect (RLA), two design techs, and one administrative assistant. We are currently seeking two qualified individuals to join our team. An opportunity within our organization is availalbe to those falling within one of the following job descriptions: Civil Engineering Design Tech, MEP Design Tech, Landscape Architect, Landscape Designer. Applicants should have a minimum of 2 years of experience in their area of practice (4 or more years is preferred). For Civil Engineering, the applicant's experience should include design of site development projects and/or public infrastructure projects. Experience in site development projects is preferred. Grading and drainage design experience is preferred. AutoCAD proficiency is a must. AutoCAD Civil 3D experience is preferred. For MEP applicants, design experience for HVAC, electrical, lighting, plumbing, and other MEP building components is a must. AutoCAD experience is a must. Revit experience is preferred. Landscape applicants should have experience in land planning, site planning, and landscape design of commercial projects. AutoCAD experience is a must. Applicants with multidiscipline ("crossover") experience will be given additional consideration. Please submit resume through craigslist or on our web site under the careers page. See our web site for more information about Bannister Engineering, LLC. www.bannister-engineering.com


DRAFTSMAN (DALLAS)
STAFFELBACH is looking for energetic, enthusiastic and positive individuals who demonstrate teamwork and can satisfy important clients. We provide opportunities for learning and growing and exciting clients with whom to work. Ours is a rewarding work environment that is detail and results oriented. Visit www.staffelbach.com for information about the firm and its projects. We are a 45-year-old firm with over 65 professionals. Excellent benefits, work ½ day Friday and allow casual attire. We are looking for the following positions:

DRAFTSMAN: 2-5 years DRAFTING experience PREFER MICROSTATION, AUTOCAD AND OR REVIT EXPERIENCE.

The DRAFTSMAN will work with the designated team members to develop quality project materials within the established time frame and within the established fee budget in order to accomplish the firm's established goals. The DRAFTSMAN will carry out the firm's established drafting standards.

PROJECT DEVELOPMENT & DOCUMENTATION

Produce project materials efficiently and effectively. Work may include, but is not limited to:

A. Drafting and delineation (manual and CADD and MICROSTATION).
B. Architectural lettering.
C. Space Planning.
D. Set up backgrounds, schedules, and details.
E. Translate mark ups.
F. Develop schematic details and elevations.
G. Presentation materials.
H. Feasibility studies work.
I. Cost estimating/budget preparation.
J. Design development details.
K. Reflected ceiling plans.
L. Door and hardware schedules, finish schedules.
M. Construction documents and specifications.
N. Assist in setting up standards.
O. Plot, print and scan drawings.



 Qualifications: Interior Design/Architect 4-6 years experienc (Dallas, TX)
Ideal candidate must be proficient in Microstation and must have experience in planning, design and construction documents for highly detailed commercial interior design projects. A background in corporate interior design projects is preferred. Ideal candidate must have good communication skills and the ability to interact with clients. Must be a self starter, be able to multi task on several projects and must be able to meet deadlines. Additional skills such as Google Sketchup, Microsoft Project, Photoshop and Revit preferred.

Compensation:
Based on experience


•Location: Dallas, TX
•Compensation: Based on experience
•Principals only. Recruiters, please don't contact this job poster.
•Please, no phone calls about this job!
•Please do not contact job poster about other services, products or commercial interests.



 Revit/Autocad Designer (Irving, Texas)
2 full-time positions available. Revit designer experienced in Revit 2010 or greater, and Autocad designer familiar with Autocad 2009 or greater. Experience in wood structural framing a plus. Ability to work overtime and weekends, as necessary. Progressive stable company located in Irving, Texas. Excellent benefits package to include full medical and 401K.


http://dayton.craigslist.org

CADD Draftsman/Architect (Dayton, OH)
A top Architectural firm in Dayton, OH specializing in a variety of different industries including health care, commercial, religious, and restoration, is looking for an Architect/CAD Draftsman to help with production work.

This person will be proficient in AutoCAD and very organized. They won't have to take a project from start to finish, but will get eventually get there. Want someone that is self motivated and seeks work rather than having it put on their desk. This person will be doing a lot of different projects, but recently they are seeing an influx of long term care facilities.

MUST:
- Must have between 1-3 years of architectural experience (co-op counts)
- Must have at least an Associate's Degree in CADD.
- This person must be able to "hit the ground running" and work on projects from schematic design all the way through construction documentation.
- Any experience within the health-care, medical, commercial, and/or historic preservation disciplines is a plus.
- Must have working experience in AutoCAD

PLUS:
- BS/MS in Architecture
- REVIT Experience
- LEED AP

Please reply to this posting with an updated copy of your resume. Qualified candidates will be contacted promptly.


http://delaware.craigslist.org

No item elements found in rss feed.

http://denver.craigslist.org

Project Architect (Cheyenne, WY)
Immediate opportunities for experienced Project Architect within our Cheyenne office. You will be working on a secured portfolio of commercial, retail and residential projects. You must be dynamic, hardworking and passionate about architecture. Minimum of five years solid industry experience and advanced technical use of REVIT required. Must have excellent knowledge of contract administration, and the ability to take the lead on multiple projects. We're a busy, creative firm looking for a talented professional who wants to serve our clients, be dedicated to our Cheyenne community and contribute to our team.
Please send your resume, portfolio, and references electronically.


AutoCAD Revit Technician (Denver, Colorado)
A well recognized Structural Engineering firm, located in Denver, Colorado has openings for experienced AutoCAD Revit technicians to help in our continued growth. We offer competitive salaries based on knowledge and experience, medical, dental, 401k plan and continued education in a friendly, hard-working professional atmosphere. 4 years of experience in consulting industry and knowledge of general construction practices are required. Projects mainly consist of commercial and multifamily residential buildings through out the United States. Applicants should be self-motivated, moderately independent, a team player, and shall have strong communication skills.


Senior Structural Engineer (Denver, Colorado)
Growing and well recognized structural engineering firm located in Denver, Colorado has an opening for qualified senior structural engineer with P.E. license. The candidate must have a BS in Structural Engineering and minimum of five years of relevant experience in consulting industry. Knowledge of post tension concrete, RAM software library and AutoCAD Revit is a plus. We provide very competitive salaries, health insurance and 401K benefits. Our firm provides structural engineering services to architects and developers to design mixed-use commercial and multi-family residential buildings.


Senior Structual Designer (Denver)
REQUIRED SKILLS/JOB DESCRIPTION
A. 5 - 7 years experience
B. Experienced in industrial structural design
C. AutoCad 3D, Cadworks
D. Ability to check own work

DESIRED SKILLS
A. Revit background
B. Navis works exposure
C. Ability to do load calculations

Candidates will not be considered who do not meet the minimum requirements.
Relocation is not provided.
Please send resume and salary requirements.



 Project Engineer / Manager (Arvada)
Concrete construction company looking for hard working, motivated individuals to fill Project Engineering/Manager positions in our Arvada, CO office.

Must have solid computer skills and be comfortable with Microsoft Office Suite and ACAD or Revit.

A degree in either CM or Engineering if preferred.

Salary, Medical/Dental/Optical, Bonuses

Please respond to posting with a resume.


Outside Sales (DTC)
An innovative design technology company is looking for an outside sales professional based in Denver who will sell our innovative light gauge framing technology and Autodesk Revit based integration software to developers, architects, engineers, and contractors. We are looking for an individual with broad real estate development experience who is literate in technical areas of the code, architectural and engineering design, and construction. This position deals directly with owners and their design professionals and is backed up by our technical and design staff and consultants. Our ideal candidate would bring a book of industry contacts including architectural firms and development companies. A background in architectural service sales or design build contractor service sales is important. Background and experience should include:

• Seven years of experience in the AEC industry
• Multifamily, hospitality, and institutional housing development
• Knowledge of the international building code
• Experience with architecture and engineering design
• Architectural and or engineering services sales
• Knowledge of planning, zoning and entitlements
• Knowledge of design industry software solutions
• Knowledge of AutoCad and Revit a plus

This is a position that will involve travel and could lead to sales management.


Mechanical Engineer (south metro Denver)
REQUIREDSKILLS/JOB DESCRIPTION
A. BS ME
B. MEP experience
C. Strong Revit experience

DESIRED SKILLS
A. Hospital MEP experience is a plus bit not required

Relocation is not provided.

Resumes will not be considered that do not meet these requirements.
Send resume and salary requirements.
US citizenship required.



 Job Captain (Denver)
Communications:
Assists Project Manager and Project Architect in communications and documentation of meetings with Owner, the Consultants, and Governmental Agencies.

Assists the Project Architect in the preparation of Prepares cartoon sets and accompanying work plan for each drawing; assists the PA for outlining all production work; ensures team awareness of and compliance with office reduction standards; along with the PA, coordinates with quality control department to develop new standards and clarify adherence to existing standards; meets with industry experts and manufacturer's representatives to assure appropriate detailing and specifying of technical construction products.

Project Design and Production:
Assists the Project architect in Responsible for the development and preparation of Design Development and Construction Documents for assigned projects; researches new materials and construction methods and suggests materials, colors, finishes; acquires catalogs, and indexes technical documents and materials samples specific to the project; assists the Project architect in the preparation of prepares code check under the direction of the Project Manager and Project Architect, initiates and develops technical level design concepts and details; reports to the shares responsibility with the Project Architect for construction document completeness and accuracy; assists Project Architect with review and coordination of specifications with construction drawings; coordinates in-house and out-of-house reprographic services, and advises technical staff on reprographic techniques suitable for specific applications.

Bidding/Negotiation:
Assists Project Architect in answering inquiries from bidders and prepares Addenda.

Contract Administration:
Checks shop drawings and other submittals. Maintains submittals and records; makes site observation visits with the Project Architect, and assists in preparation of documentation.

The Job Captain will assume other responsibilities as determined by the Principal-in-Charge, Project Manager, and/or Project Architect.

Qualifications:
3+ years of experience
REVIT Experience
Proven ability as a drafter.
Works well with others in a collaborative environment
Proven ability to instruct and lead others.
Reliable and accurate.
Experience with Microsoft Word & Excel software.
Able to organize and follow through on assignments.
Willingly takes direction from superiors.

Responsibilities:
Prepares the building code review.
Researches new products and reports to Project Architect
Establishes sheet layout & composition of drawing set.
Enforces drafting standards.
Coordinates specifications & interior designers.
Coordinates all plotting, printing, and shipping.
Checks results of red lines for completeness and accuracy.
Produces and distributes meeting minutes of consultant coordination.
Produces Addenda and checks shop drawings.
Assists the Project Architect as needed.


Structural Engineer (Golden, CO)
The Denver office of Brown and Caldwell has an exciting opportunity for two Structural Engineers to join our Structural Design Group. The successful candidates will work on various projects for municipal, industrial, and federal clients. The candidates will work with structural, mechanical, process and electrical engineers and designers on designs for facilities primarily serving the water and wastewater industries. Project work includes: structural design for small to large projects in Colorado, Arizona, and other states around the country; directing structural CAD staff in the preparation of construction drawings; preparation of project specifications; coordination with other engineering disciplines; and construction support services. The successful candidates will enjoy working in a collaborative, multi-discipline environment to develop innovative, cost effective designs for new facilities, expansions, upgrades and retrofits.

Responsibilities:

*Provide structural engineering design for tanks, basins and building facilities at water and wastewater treatment plants.
*Provide structural engineering design for industrial facilities.
*Design concrete, steel, masonry and wood structures per IBC.
*Design concrete structures utilizing ACI 318 and ACI 350 for Environmental Structures.
*Perform seismic design and evaluations using IBC, ASCE, and ATC documents.
*Design crane supports (monorails and runway beams).
*Develop structural scope and engineering estimates for projects.
*Prepare detailed design sketches, or work directly within CAD or Revit Structure, and coordinate with CAD drafting staff to prepare 3-D models and design drawings.
*Prepare construction specifications.
*Coordinate structural project work with architects and process, mechanical, and electrical engineering staff.
*Provide construction support: submittal review, RFI responses, and construction observations.
*Utilize RISA 3D, Enercalc and other software for structural design.
*Contribute to standard detail and specification updates.


Position Requirements:

*Knowledge of concrete, steel, masonry and wood structural design per IBC and referenced codes required
*Minimum of 5 years of experience in structural engineering design required
*Structural design experience with wastewater treatment plant or industrial facilities is a plus
*Seismic design experience required
*B.S. and M.S. degrees in Civil Engineering (structural course work emphasis) both required
*Colorado PE license required or the ability to obtain CO PE by comity; SE license a plus
*Experience coordinating with staff performing 3-D CAD or Revit Structure is a plus
*Candidate should be motivated and a self-starter with the ability to work independently and in teams
*Candidate should have excellent time management skills and be able to prioritize tasks effectively
*Candidate should have strong technical skills with the ability to articulate ideas and concepts visually, contextually, and in writing

This position is subject to a pre-employment background check and a pre-employment drug test.

We offer a competitive salary and benefits package.

Apply on our website at: http://tbe.taleo.net/NA9/ats/careers/requisition.jsp?org=BROWNCALDWELL&cws=1&rid=751

No calls please.





 Entry Level AutoCAD and Revit BIM Engineer (Denver)
Denver area airport systems design consulting firm has an immediate need for an entry level BIM engineer/designer in the material handling field. We specialize in the design of baggage and cargo handling systems, as well as apron systems for airports throughout the world.
Excellent written and verbal communication skills are required. AutoCAD 2D and 3D skills are also required, in addition to proficiency with Revit. The position will be based out of the Denver office; however, travel will be required so the ability and willingness to do so is a must. An engineering background is preferred. The preferred candidate would also have the following skills:
• Able to work independently and must have ability to meet inflexible deadlines.
• Background or industry experience in one of the MEP disciplines is a plus
• Rendering/Animation a plus

We are looking for a local candidate, and as such, no relocation package is being offered for this position. The candidate will be required to pass a federal background checks and possibly drug screening. Each applicant will be required to take short skills assessment tests for both AutoCAD 2D and 3D, as well as Revit.

We are an equal opportunity employer. We provide an excellent benefits package.
Please send your cover letter and resume to bnpadenver@gmail.com.



http://desmoines.craigslist.org

Drafting/design services offered (Iowa)
I am a small business owner, providing drafting and design services to Architects, Engineers, Homeowners, etc.. I'm looking to take on more clients in Commercial and/or Residentail jobs. I have 10+ years experience in CAD, 5+ years in Residential/commercial, and 2 years custom in-ground swimming pool/spa/water features design. I work with AutoCAD, Revit, and am also very well versed in Sketchup. I work for myself full time, so schedule can be flexible if needed.

Please see my website for examples of my work, and use the contact page to reply. If you would like more examples or references, please let me know.

Thank you very much!

www . DoakDesign . com



 CAD (Des Moines, Iowa)
Immediate Full Time Position. We are seeking an individual skilled in electronic construction drafting including AutoCad, Revit and 3D Modeling.


Revit Technician (Des Moines)
We have an immediate opportunity for a Revit Technician. Must have an understanding of how buildings go together and 1-5 years of drafting experience with architectural projects.

** Please include resume when applying.


http://detroit.craigslist.org

Revit Draftsman (Metro Detroit)
Up and coming business in need for a draftsman. Preferrably a student or young adults as the business is run by young adults. Needs to have skills in AutoCAD, Autodesk Revit, and preferrably Navisworks although we can teach that. The position will be contract by contract for now until we have a more constant work flow. As of right now we have 2 active projects and just completed two others. We are working on getting another large project in early February that we need to have someone on board and ready to go for. If you are interested please submit and questions you have otherwise a resume will be great. If we like your resume, we will then ask for examples of work. If after that we still are interested we will call you and set up an interview.


http://elpaso.craigslist.org

No item elements found in rss feed.

http://eugene.craigslist.org

No item elements found in rss feed.

http://fortmyers.craigslist.org

No item elements found in rss feed.

http://fresno.craigslist.org

Assistant Project Manager (Architecture)


Vanir Construction Management, Inc. is comprised of talented professionals like you. They are intuitive, goal oriented, and think progressively while working in a variety of roles to provide the highest level of client satisfaction. It is this mindset of success, coupled with our opportunities that will help develop and define your career.

Vanir CM currently has a unique opportunity for a talented individual to assist in the continued strategic growth of our organization. The position of Assistant Project Manager, Architecture located in Dammam, Saudi Arabia will work collaboratively with colleagues to deliver intelligent solutions that ensure quality project delivery. As an Assistant Project Manager, Architecture you will have the opportunity to work with an international workforce focused on the design phase management of a large state-of-the-art medical facility. This is an ideal opportunity for someone with experience in integrating BIM technology and collaboration to insure a successful project. As a Vanir employee, you will be a vital member solving complex design, construction, and operational issues with a maintained focus on customer satisfaction. Be part of our unique culture which fosters growth, communication, and teamwork

Job Requirements

• Qualified candidates will possess 3-5 years experience providing architecture or construction management services on large institutional facility projects and programs.
• Knowledge and experience with the utilization of BIM technology in the design and management of complex projects and large project teams is desired.
• Experience with BIM, Revit, and or other related architecture design and modeling programs and technology is necessary.
• Knowledge and experience with construction management procedures, means, and methods.
• Good communication, writing and computer skills are essential.
• Bachelors degree in Architecture, Engineering, Construction Management or related field is required.
• Ability to communicate in Arabic (speak/write) is a plus.

About Vanir:

Over the last 30 years Vanir Construction Management's progressive growth and quality of service has developed this organization into the most respected and recognized provider of construction management solutions. As we continue to grow into new areas and markets, our focus is to remain the same, meet the needs of our clients, and the communities in which we work.

Equal Opportunity Employer M/F/D/V

TO APPLY: www.vanir.com/careers/ourpeople.aspx
Reference#: VAPMOS963


http://grandrapids.craigslist.org

No item elements found in rss feed.

http://greensboro.craigslist.org

No item elements found in rss feed.

http://harrisburg.craigslist.org

Senior Structural Engineer (Rochester, NY)
Ravi Engineering & Land Surveying, P.C. is seeking a licensed Structural Engineer with experience in Building Projects. Position available immediately. This individual will be responsible for technical direction and project management including development of structural concepts, strategies, designs, drawings, specifications and reports. Individual must be able to work independently and in teams, and be able to interface with clients and architects. Autocad experience is essential. Revit experience, as well as project history using computer analysis software is a plus. A Bachelor's degree and minimum of 8-10 years of experience working at an A/E consulting firm preferred. Our benefits include health, dental and vision insurance, professional development, paid time off and a 401k plan. Ravi Engineering & L.S., P.C. is an Equal Opportunity Employer. Please send cover letter and resume.


Architect (Lewisburg, PA)
Intern Architect | Architectural Project Managers
Looking for highly motivated professionals with the following skill set:
- Revit & Construction Detailing
- Strong communication skills with commitment to client relations
- Organizational & Project Administration abilities
- Individuals seeking professional registration, Bachelor or Master of Architecture required
www.ralad.com

(please mention that you found us on craigslist.com)


http://hartford.craigslist.org

Construction Administration Architect (Hartford, CT)
Amenta/Emma Architects Hartford office seeks Architect to handle standard construction administration services on a large scale institutional project in CT. Duties will include review and processing of shop drawings and rfis, attendance at minimum weekly project meetings, performing field reviews and general coordination with consultant team. Project will utilize a web management system throughout construction and electronic review and processing of all documents. Revit proficiency is preferred and use of revit required on project.

B. Arch or equivalent professional degree required. Provide resume and 3 references with contact information.




 Drafting Services (Milford)
I am available for freelance drafting work in architecture but can draft for any profession or trade.

Homeowner services;
Complete home design,
Decks and additions,
Building department drawings

Architects and Contractor services;
Document existing conditions
Paper to CAD conversion
3D Modeling
Autocad or Revit software training.

My experience:
Bachelor of Architectural Engineering, 7 years Autocad instructor, 25 years using Autocad up to the current version, 3 years basic/intermediate Revit experience.
I am dependable, knowledgeable and professional. Resume and portfolio available upon request.
Thank you.

http://honolulu.craigslist.org

Junior Project Manager /Job Capitan (Honolulu)
Architecture and Interior Design firm looking for a person to assist project managers. Need to have:
• 3-5 Years' experience in an architecture firm;
• Good AutoCAD and Revit skills;
• A Degree in Architecture;
• Knowledge of construction, codes, and technical standards;

Competitive salary and benefits. Please respond with your resume and some additional information about yourself.





 Project Architect (Downtown) (Honolulu)
Growing Architectural firm in Honolulu is seeking a qualified, technical Project Architect to work with young, energetic architectural group in preparing construction documents. Strong Construction Aministration experience a plus. Candidates should possess the following:

• Degree in Architecture or related field. Architectural license a plus
• Minimum 12-15 years experience preparing arcitectural construction drawings using AutoCAD and/or Revit (Revit experience preferred but not required).
• Strong attention to detail
• Excellent verbal and written communication skills
• Ability and willingness to work with others on multiple projects

Benefits:
• Pay commensurate with experience
• Paid vacation/sick leave
• Full health benefits
• 401K and profit sharing




 PV Designer/Engineer (Honolulu)
Expert Solar PV Designer

Revolusun LLC is the State's leading renewable energy contractor.
We are experiencing rapid growth and need to add an expert Solar PV Designer/Engineer
to our dynamic team.

You will design Solar Photovoltaic systems for medium-to-large commercial and
industrial grid-tied installations, utilizing and applying various available
technologies as appropriate for the site-specific conditions and customer needs.

You must be a strong communicator, disciplined and detail oriented, with a strong
knowledge basis in electrical theory and multiple power distribution voltages. You
must also be a confident support resource for other team members in technical
matters.

Primary responsibilities include:

• Site survey and analysis
• Existing electrical load and energy consumption analysis and utility rate structure analysis
• Accurate system performance calculations
• Working with the project sales personnel on presentations and technical matters
• System proposal design and calculations
• 3D proposal design and modeling
• Synthesis of all necessary information to develop cost effective and readily deployable PV designs
• Design of monitoring systems
• Preparation of complete electrical, mechanical and structural design
• Ability to coordinate with other design disciplines and consultants
• Code compliance
• Preparation of detailed construction drawings, documentation and submittals
• Execute permitting requirements
• Execute utility connection requirements
• Generating system specifications and preparing bid documents.
• Building detailed bills of materials.
• Analyzing construction methodologies and cost structures.
• Interacting with and overseeing the work of subcontractors
• Troubleshoot design and construction issues in the field
• Manage design staff
• Strong knowledge of wide range of industry products and technologies

Minimum 3 years experience in the design or installation of solar PV systems. BSEE or other
professional engineering degree is desired. Auto-CAD, Sketch Up, Revit and MS Office proficiency
is required. Familiarity with NEC and other building codes. PVWATT or PVSYST familiarity.
Solar Thermal design experience is a plus. PE license and/or NABCEP certification is preferred but
not required. Other construction/electrical engineering design experience may be considered.

This is a full-time employee position for a highly motivated, positive, team-oriented individual.
Please provide your resume and salary history for consideration.

Keywords: solar, pv, cad, autocad, designer, electrical, engineer, nabcep


Project Manager - Architect (Oahu)
Opportunity to be part of InForm Design, a Honolulu based Architecture and Interior Design firm. We are looking for the right person to join and work with us as a Project Manager. If you have:
• Excellent Project Management skills;
• 7+ Years' experience in an architecture firm;
• Strong AutoCAD skills -- Revit, Graphics, LEED AP, etc. a plus;
• At least a BA in Architecture;
• Great communication skills;
• Working knowledge of construction, codes, and technical standards;
• Ability to prepare specifications using Master Spec;
• Skills with Bentley Architecture a plus

We offer a competitive salary, full range of benefits, and an excellent, fun work environment. If you have all of the above and more, and would like to talk with us about this position, please respond with:
• Your resume (portfolio not necessary);
• An attached (pdf or MS word) cover letter with your;
o Thoughts on why you feel you are qualified for the position
o Compensation desires -- a ball park number is what we are looking for
o Your Availability




 Solar Project Engineer (Hoku Solar) (Queen & Ala Moana Blvd)

Hoku Solar, a wholly owned subsidiary of Hoku Corporation (NASDAQ: HOKU), a diversified clean energy technologies company founded in 2001, is seeking a motivated and experienced Solar Project Engineer to be based at Hoku's Honolulu headquarters.  The position will focus primarily on providing technical support for solar projects under development as well as projects in the business development pipeline.

The successful candidate will join a small and accomplished group dedicated to the widest, most cost-effective deployment of clean solar energy technology possible.

Job Responsibilities

Qualifications

If this career opportunity interests you, please apply today.

This is a full-time position with Hoku Solar that offers competitive compensation and a comprehensive benefits package.  Please join us as we help shape a clean energy future.

No relocation assistance is available for this position.
 
Principals only please. No agency candidates will be considered. Please apply direct to Hoku. No phone calls please. Hoku is an equal opportunity employer, committed to a diverse workforce.




 Architect
Looking for an Architect with a bachelors degree and experience with Revit. Salary commensurate with experience. Reply with resume and salary expectations.


Project Architect (Honolulu, HI)
RIM Architects (Hawaii) has an intriguing opportunity for a registered Architect with 7+ years experience and proven proficiency as a Project Architect to join our team and make a rewarding impact at RIM. A strong technical background, a working knowledge of construction, codes and technical standards required. Must have demonstrated ability to produce high quality designs, prepare specifications (using Master Spec and SpecsInTact), and working drawings using AutoCAD, and/or Revit Architecture 2012 and Bentley Architecture V8i. In addition to strong organizational, written and verbal communication skills, expertise in delegation with team and client negotiation a must. Experience and desire to work on Healthcare projects is a plus.

Qualified, energetic and positive applicants who are interested in assisting RIM achieve expectations of delivering excellent architecture may reply to this ad by submitting their resume accompanied by a cover letter. Confidentiality ensured.

For a complete position description and requirements visit: www.rimarchitects.com

RIM is an EEO Employer.


Senior Project Manager (Honolulu, HI)
RIM Architects (Hawaii) has an intriguing opportunity for a registered Architect with 10+ years experience and proven proficiency as a Project Manager to join our team. Outstanding verbal and written communication skills are required to inspire and mentor staff while leading and managing projects effectively. Broad experience with planning, scheduling, and effectively working with project team, owners, contractors, and consultants is essential. Direct project experience with AutoCAD and working knowledge of Revit is required.

Qualified, energetic and positive applicants who are interested in assisting RIM achieve expectations of delivering excellent architecture may reply to this ad by submitting their resume accompanied by a cover letter. Confidentiality ensured.

For a complete position description and requirements visit: www.rimarchitects.com

RIM is an EEO Employer.



 Architectural Position (Downtown)
Architectural firm in Honolulu is seeking a qualified, technical Architect to work with young, energetic architectural group in preparing construction documents. Construction Aministration experience a plus. Candidates should possess the following:

• Degree in Architecture or related field. Architectural license a plus, but not necessary.
• Minimum 8 years experience preparing arcitectural construction drawings using AutoCAD and/or Revit (Revit experience preferred but not required).
• Strong attention to detail
• Excellent verbal and written communication skills
• Ability and willingness to work with others on multiple projects

Benefits:
• Pay commensurate with experience
• Paid vacation/sick leave
• Full health benefits
• 401K and profit sharing



 Solar Project Engineer (Hoku Solar) (Queen & Ala Moana Blvd)

Hoku Solar, a wholly owned subsidiary of Hoku Corporation (NASDAQ: HOKU), a diversified clean energy technologies company founded in 2001, is seeking a motivated and experienced Solar Project Engineer to be based at Hoku's Honolulu headquarters.  The position will focus primarily on providing technical support for solar projects under development as well as projects in the business development pipeline.

The successful candidate will join a small and accomplished group dedicated to the widest, most cost-effective deployment of clean solar energy technology possible.

Job Responsibilities

Qualifications

If this career opportunity interests you, please apply today.

This is a full-time position with Hoku Solar that offers competitive compensation and a comprehensive benefits package.  Please join us as we help shape a clean energy future.

No relocation assistance is available for this position.
 
Principals only please. No agency candidates will be considered. Please apply direct to Hoku. No phone calls please. Hoku is an equal opportunity employer, committed to a diverse workforce.




 Job Captain (Honolulu)
8 plus years in Architecture a must
BA degree in Architecture a must
Revit experience in design
Prefer someone who has been in a Job Captain Role


PV Designer (HONOLULU)
PV Designer wanted very soon!!!!

Pay: up to $70k/ year.

-Minimum 3 years experience in the design or installation of solar PV systems.
-BSEE or other professional engineering degree is desired.
-Auto-CAD, Sketch Up, Revit required
-STRONG Computer Skills; 55wpm, 10, 000ksph
-Familiarity with NEC and other building codes. PVWATT or PVSYST familiarity.
-Solar Thermal design experience is a plus

-Site survey and analysis
-System proposal design and calculations
-3D proposal design and modeling
-Preparation of complete electrical, mechnical, and structuraldesign
-Generating system specifications and preparing bid documents



 Architect (Honolulu)
Medium sized company is looking for a Architect with strong technical skills ( CAD Captain if great)
BA in Architecture is preferred, license is helpful
Revit background or Advanced Cad 2008 to 2011
6 to 8 years experience with commercial and residential drawings
Able to take a project and from start to finish


Revit / CAD Permit Production Drafter (Honolulu)
Revit / CAD Permit Production Drafter

We have an opening for a Revit / CAD Permit Production Drafter--

This is a part time to full time position with a possibility to a part ownership in the company/ profit sharing based on production

Primary skills required / preferred:

• DPP Permit Production of all phases of new homes, commercial projects and simple house additions
• Must know to submit, route, interact with plan reviewers and follow up on permit process
• Must know any Revit 2012 flavor such as architectural, MEP and structural; Preferably Revit Architectural
• Secondary skills are CAD 2012, Sketch up
• This is a part time to full time position with a possibility to a part ownership in the company
• We can train to a certain extend but candidate must bring minimum skills and must work with minimal supervision

No Relocation provided; Honolulu residents only.


Electrical Engineer (Oahu)
Seeking an Electrical Engineer, 3-5 years experience, analyzing, designing, monitoring and managing power methods and structures. Must be detail oriented and an excellent communicator. Proficient in Auto-CAD, Sketch Up and Revit. Construction or electrical experience highly desired. Reply by attaching your resume in Word format.


http://houston.craigslist.org

Autocad Drafter/ CAD Technician (Northwest Houston)
We are a structural engineering firm in the Northwest Houston area that specializes in wood, steel, and concrete structures in the residential, multi-family, and commercial construction markets. We are in need of an experienced Autocad drafter, with a minimum of 3 years of experience, and experience with multi-family design. 3D cad experience is not required at all, but Revit experience would be a bonus.

The position is a 40 hour, M-F, roughly 8-5 work schedule. Holidays, vacation, and healthcare benefits are included. Please state salary requirements.

Please e-mail us your resume with a description of your relevant drafting experience. No cover letters are necessary and please attach your resume as a separate file.
Please accept our appreciation for your application in advance as we will not be able to respond to all inquiries but will only be able to contact those candidates that we wish to interview. We expect to make a decision within two to three weeks.



AutoCad/Revit Production (Houston)
Residential Design firm is seeking an experienced AutoCad production person with background in residential. We require a minimum of 5 years in AutoCad and experience in Revit. Must have work background in producing multi-family and single family product to be considered . Please email resume.


http://humboldt.craigslist.org

No item elements found in rss feed.

http://indianapolis.craigslist.org

Electrical CAD Technician (Indianapolis, IN)
DEEM, LLC
CAD Technician
DEEM is looking to hire an AUTOCAD Technician with a strong background in electrical design. The ideal candidate should be able to design and develop layouts for electrical circuits or systems for power distribution. Assists in the production of detailed schematics.

This opening requires basic knowledge of electrical equipment and local building codes. A bachelor's degree in a related area will be highly valued and 4-5 years of experience in the field or in a related area. Familiar with standard concepts, practices, and procedures within a particular field. Candidate should be able to rely on experience and judgment to plan and accomplish goals. Be able to perform a variety of tasks. Works under general supervision. A certain degree of creativity and latitude is required.
Responsibilities and Duties
• Performs drafting operations for the determination of project plans and collects data for Project designs.
• Prepares complex drawings for Engineering Projects
• Develops and drafts engineering drawings and plans, drafts contract documents and generates correspondence for clients and managers
• Maintains dynamic communication with engineers, field installers and clients for any architectural, engineering or construction issues
• Perform field survey, documentation, research and drafting tasks of engineering data as requested by clients or managers
• Performs regular computer software and AutoCAD maintenance, upgrading and troubleshooting
• Maintains up to date working and technical knowledge of all procedural and improvement changes to computer hardware and software applications
Skills and specifications
• Ability to fully understand and follow highly complex oral and written instructions
• Skills to operate basic office equipment like printers, computer terminals, facsimile machines, copy machines and telephone systems
• Ability to operate, access, and maintain diverse software applications
Minimum training and experience
• Four years of experience
• Relevant Degrees, Training and Certifications in design or related field
• CAD Software:
o AutoCAD Classic
o AutoCAD MEP
o Building Information Modeling
o Autodesk Revit
• Microsoft Access, Word, and Excel
• Proficiency in the use of Internet browsers and email
DEEM, LLC is a single source for all mechanical/refrigeration/plumbing and electrical services offering preventative maintenance agreements on equipment as well as 24/7 emergency services.
DEEM offers an excellent compensation and benefit package. Benefits include medical/dental/vision insurance, paid vacation (up to 3 weeks with over 10 years proven field experience), paid holidays, life insurance, voluntary life and long term disability and 401k with generous company match.
If you are a high-energy, customer-focused individual looking to work for a stable and growing company, please apply online at www.deemfirst.com/jobs When applying through our website, please apply for the job titled CAD Technician. All candidates must apply through our website to be considered for employment.


**Candidates must pass a pre-hire drug screen.



http://inlandempire.craigslist.org

Cadd/Revit Structural Draftsman (Ontario)
RM Byrd and Associates, an established 20 year Ontario Structural Engineering firm, is seeking Cad and Revit Operators/Draftsmen with 1-5 years experience.
Successful candidate will have excellent AutoCad skills, be detail oriented, mechanically inclined, a self starter, capable of taking and following directions, and possess excellent organizational skills.

Familiarity with Structural construction documents, Architectural documents, and the various materials of construction a plus. Previous structural experience not required, but preferred.

Our firm offers health, 401k with match, and a comfortable work environment.

Do not apply if you if you are not an accomplished AutoCad operator. We are willing to train the right candidate in the field of structural drafting, but you must come equipped with proficient Cadd skills. Revit experience a plus.

Prior to hire, you will be required to demonstrate AutoCad proficiency.

Visit our website at www.rmbyrd.com
Forward your resume with cover letter and salary requirements for consideration, no phone calls at this time please.





 Revit / Project Manager (Fontana,Ca)
We currently have an opportunity for a full time position for someone with at least 3 years of Revit experience through completion of Construction Documents. AutoCAD and Photo Shop Skills are also recommended but Revit is a must. Must be able to take on and complete tasks by your self and/or with a team.

Andresen Architecture is a small office offering a wide variety of work and experiences. We offer the latest in technology and an open environment where personal responsibility and professional growth is nurtured. Excellence is pursued in every aspect of our practice.

If you have an interest in working in a challenging, fast-paced, friendly environment, with excellent pay & conditions, we'd like to talk with you.

Please submit resume, references and relevant work samples



 Architectural - Revit Draftsmen / Designer (Fontana Ca)
Andresen Architecture is a small office offering a wide variety of work and experiences. We offer the latest in technology and an open environment where personal responsibility and professional growth is nurtured. Excellence is pursued in every aspect of our practice.

We currently have an opportunity for a full time position for someone with at least 3 years of Revit experience through completion of Construction Documents. AutoCAD and Photo Shop Skills are also recommended. Must be able to take on and complete tasks by your self and/or with a team.

If you have an interest in working in a challenging, fast-paced, friendly environment, with excellent pay & conditions, we'd like to talk with you.

Please submit resume, references and relevant work samples


Architecture Student Assistant (Upland)
Architecture student seeking assistance with scaled model building and should have knowledge of various computer programs such as AutoCAD, Sketch Up, and Revit.
This job and its monetary compensation will vary depending on the projects and their due dates.
If interested please email.
Thank You


http://ithaca.craigslist.org

No item elements found in rss feed.

http://jackson.craigslist.org

Project Architect (Memphis, TN)
Looney Ricks Kiss is a nationally recognized design firm built around a collaborative team of architects, urban designers, planners, interior designers, and environmental graphic designers who believe that great places are created through the integration of all these disciplines.

LRK is currently seeking Project Architects to join our team in Memphis, TN. Responsibilities include producing design development and construction documents in AutoCAD or Revit from conceptual drawings, assisting in conceptual and schematic design, managing production work with a high level of technical accuracy.
¬
The ideal candidate must have 5+ years of proven experience in all phases of the design process, preferably with multi-family residential and/or mixed-use projects. Must possess a comprehensive understanding of building technology and structures; and have outstanding communication and client interaction skills. Demonstrated problem solving skills and the ability to lead a project team on a complex project or work independently on a small project are required. Proficiency with AutoCad, Revit, InDesign, PhotoShop, SketchUp Pro and Microsoft Office Suite is a must. Degree in architecture required. Architectural license and LEED AP preferred.

This is your opportunity to join a talented team of design professionals. LRK offers professional growth and an excellent benefits package. . . in a friendly, creative, and positive work environment. For more information on LRK, please visit www.lrk.com.

Interested applicants should respond to this posting by submitting a cover letter, resume and three professional references.

EOE

http://jacksonville.craigslist.org

Architectural Drafter / Production Architect (Jacksonville, FL)
We are seeking an Architectural Drafter / Production Architect with the following skills/capabilities:

* good computer skills - Autocad & 3D Modeling experience are necessary - Google Sketchup // Revit experience is a +++
* good schematic design and construction documents production
* a production Architect who knows how to build a building
* Residential and Healthcare buildings experience +++

Non-negotiables:
1. Team Player
2. Great Communicator - good presentation and good written skills
3. Strive for Excellence

Please forward along your resume if interested. Thank you.

Contact Info:
Aerotek
Chris McCauley
904-527-5597


Structural Engineer/Drafter (Orlando)
Structural Engineer
Immediate needed for a Structural Engineer. Ideal candidate will have PE certification and 5+ years experience in structural engineering field. Ideal candidate will have extensive and varied background in all aspects of Commercial and Residential structural designs. Good computer, communication, CAD, and people skills are essential to succeed in this position. Company offers competitive compensation based on experience.

Entry-Level Structural Engineer
A talented and eager-to-learn candidate with a bachelor's degree is considered. Experience with AutoCAD /Revit and with structural analysis programs is not required but will be highly regarded.


Structural Engineering Dafter

Experience with AutoCAD /Revit and three year drafting experience
benefits as follows:
• Med Insurance, Paid Vacation, Holiday, Sick time
Qualified candidates can submit their resume in MS Word format to jobmailengineers@gmail.com

http://kansascity.craigslist.org

Senior CAD/BIM Designer (Kansas City,MO)
Specific responsibilities:

- Review and comprehend project specifications for installation requirements

- Review and comprehend architectural, structural, mechanical and plumbing drawings

- Review and comprehend pipe, valve, fitting, equipment, fixture submittals

- Prepare drawings from architects, engineers or other contractors for use during coordination

- Evaluate best approach that is consistent with our company's engineering standards and the contract documents

- Use information from contract documents to create an accurate, detailed 3D BIM model of mechanical piping and plumbing systems

- Coordinate 3D BIM models with other contractors using Navisworks

- Create spool drawings for fabrication

- Create shop drawings for field installation

- Create Trimble layouts of piping, hangers, sleeves, equipment and equipment pads

- Participate in onsite or online coordination meeting

- Maintain project drawing files and associated records and documentation



Desire Skills Required

- CAD-Mech

- AutoCAD -- Version 2010 or later

- NavisWorks -- Version 2010 or later

- Revit (Version 2010 or later -- not required, but a plus)

- Microsoft Office



 Structural Engineering CAD & Field Technician (Merriam, KS)
Apex Engineers, Inc. (Apex) is a privately-owned regional structural engineering firm specializing in residential and commercial building construction. Apex offers structural engineering inspections and reports, and complete structural design services. Apex is licensed in Kansas, Missouri, Colorado, Nebraska, Iowa, Texas, Oklahoma, Minnesota, and Montana.

Apex is currently seeking a full-time CAD technician and field construction inspector. 1-5 years drafting experience preferred and fluent through AutoCAD 2012. Previous structural design work and detailing a plus. Job would also entail job-site visits to provide (structural) special inspections for all phases of construction. Primarily inspections would be pre-concrete pour. Previous construction experience a plus. ACI, NICET, CWI, or similar certifications a plus. REVIT experience a plus.

Please reply with a copy of your resume and salary expectations to:

bryce@apex-engineers.com (NO phone calls).

Part-time candidates would also be considered.

Salaried Position: expected to pay $11/hr - $18/hr based on experience.

Valid driver's license required.

Position is available to be filled immediately.

Visit our website for additional information about our firm.

www.apex-engineers.com



Structural Engineer (junior level) (Kansas City)
Seeking Jr Structural Engineer

Typical Duties Include:
• Structural Load calculations
• Sizing & specification of Structural Members (supports, racks, hangers, etc)
• Specification and Drawing Reviews
• Some design/drawing (Autocad, Revit, Modeling)
• Utilization of Excel Spreadsheet for Engineering Calculations
• Utilization of Word for reports and technical document writing


Experience:
• BSCE, BSArchE(ABET accredited)
• 0-3 Years Experience
• EIT preferred


Long Term Contract Assignment (12+ Months), possibility of long term hire

Location: Kansas City

Please submit resume to be contacted by recruiter.

Midwest Personnel, Inc
www.mwpersonnel.com



 CAD OPERATOR/DESIGNER (MISSOURI)
MEP Consulting Engineering Firm looking for a CAD Operator/Designer with a minimum of 2 years' experience in Mechanical, Electrical, and Plumbing Design. Must be detail oriented and proficient in AUTO CAD, REVIT, and MEP. Benefits Package Offered. Positive Working Environment.


Architect or Intern (Johnson County)
A/E firm seeks design professional to develop complete set of (Autocad and Revit) plans and specifications for 3500 SF Prairie Village home working on a lump sum basis from our office. Completed documents are to include comprehensive architectural, civil, structural, MEP, and electronic/control system plans, schedules, details, and specifications in completing the design development and final CD phase of this $550k project. Preliminary design is complete. Work is to be accomplished in our office using our PC (and CAD, Revit, and MSWord software) to complete thorough and accurate documents. Compensation will be on a lump sum basis upon completion of the work in accordance with an agreed scope and contract sum. Civil, structural, and MEP engineering will be provided by others, but all material selections, specifications, and detailed drawings (for all work disciplines) are to be accomplished by the professional selected and understanding of the various building sub-systems to be integrated is required. Architectural and engineering supervision and certification is to be provided by others, but all required planning/zoning approval is to be accomplished by the individual under the proposed agreement.. Completion of the work is to be within a schedule as agreed during our regular office hours.

For consideration, submit your resume of education and experience (including CAD and Revit) along with a range of anticipated cost and schedule for completion of the entire scope of work as stated.

Qualified candidates will be provided with preliminary design documents from which to prepare a final cost and schedule proposal.



 Structural Drafter (KCMO)
We are currently seeking an experienced Structural Drafter:

Candidate will draft, model, and coordinate with concrete and steel for various commercial, institutional and industrial structures. Additional responsibilities include working with designers and engineers on accuracy of drawings.

Skills / Requirements
An Associate‚s Degree in Drafting with 2 years relevant experience is required,
Revit experience is a plus.

http://knoxville.craigslist.org

CAD Operator / REVIT (Knoxville, TN)
Looking for a part time to full time CAD Operator for Revit AutoCad.

Must have at least one year on REVIT MEP 2011

Electrical background a plus.

Please reply with resume or a brief description of qualifications.

http://lasvegas.craigslist.org

Mechanical Engineer (Biloxi, MS)
Multi discipline engineering design firm is looking for an experienced Mechanical Engineer. Candidate must have experience with commercial, educational, and gaming building and system design. Proficiency in Autocad a must, Revit experience a plus. Position offers significant autonomy. Completive salary and benefits package offered DOE. Please respond with resume via email.


BADA BIM! BADA BAM! BADA BOOM!

The BIM part -- 5 years Architecture experience in Project Management and proficiency in Revit.
The BAM part -- ability to meet project deadlines by delivering accurate architectural documents, drawings and models.
The BOOM Part - must be able to coordinate and direct other staff and consultants on complex hospitality projects without causing an explosion of epic proportions.

If you have the minimum Project Management requirements, and are interested in joining the YWS team, email your resume and portfolio to:

Karen Clutts, Human Resources at kclutts@ywsinternational.com

TELEHONE CALLS or EMPLOYMENT AGENCY SOLICITATIONS WILL NOT BE ACCEPTED!!!!



 Electrical Designer (Southwest Las Vegas)

JBA Consulting Engineers values employees with a combination of experience, commitment, passion and integrity. We are looking for collaborative individuals with solid backgrounds in electrical design. JBA Las Vegas currently has openings for experienced Electrical Designers. Candidates should have leadership experience and the ability to cultivate great relationships with new and existing clients.

The Electrical Designer positions are responsible for preparing design drawings and specifications for new construction, existing facilities expansion, and renovation projects. Projects will be of moderate complexity. Design requirements will be defined by verbal instructions, sketches, and/or formal documents.

Required Candidate Skills:

1. Expertise in the use of Revit and CAD.
2. Ability to collect field data and accurately record findings.
3. Ability to prepare floor, site, and other architectural plans using Revit/CAD drafting techniques.
4. Ability to perform field review and make necessary adjustments to conform to job specifications.
5. Ability to perform system design functions.
6. Knowledge of contract documents and specifications.

Position Responsibilities:

1. Obtains basic data from documents, occupant interviews, and field measurements.
2. Prepares floor plans, site plans, and other drawings for small construction and remodel projects using computer aided drafting techniques.
3. Compiles specifications and contract documents from existing sources for assigned projects.
4. Performs field review of existing facilities to determine and verify relevant services and site layout, and to coordinate construction with plans and specifications.
5. Responsible for basic system sizing and layout, selection of components for systems.
6. Assists in preparation of cost estimates and in coordination of construction and renovation projects.
7. Utilizes AutoCAD, Architectural Desktop and/or Revit equipment and maintains current knowledge of CAD technology principles and applications.

Position Requirements:

1. 3 years of design experience that is directly related to the duties and responsibilities specified.
2. Proven ability to perform the duties specified with prior project experience at an equivalent level of responsibility.
3. Certificate of Competency in Architectural Drafting preferred.

Position is based in Las Vegas, Nevada.

JBA Consulting Engineers offers employees and their dependents health, dental, vision and group term life insurance that is paid 100% by the company. We also have a 401k plan, relocation assistance as well as other supplemental insurance policies. JBA has paid holiday, sick, vacation and personal time and maintains professional memberships and licenses on behalf of the employee. We also have flexible work schedules to promote our work/life balanced environment!






 Assistant Project Manager (Architecture)


Vanir Construction Management, Inc. is comprised of talented professionals like you. They are intuitive, goal oriented, and think progressively while working in a variety of roles to provide the highest level of client satisfaction. It is this mindset of success, coupled with our opportunities that will help develop and define your career.

Vanir CM currently has a unique opportunity for a talented individual to assist in the continued strategic growth of our organization. The position of Assistant Project Manager, Architecture located in Dammam, Saudi Arabia will work collaboratively with colleagues to deliver intelligent solutions that ensure quality project delivery. As an Assistant Project Manager, Architecture you will have the opportunity to work with an international workforce focused on the design phase management of a large state-of-the-art medical facility. This is an ideal opportunity for someone with experience in integrating BIM technology and collaboration to insure a successful project. As a Vanir employee, you will be a vital member solving complex design, construction, and operational issues with a maintained focus on customer satisfaction. Be part of our unique culture which fosters growth, communication, and teamwork

Job Requirements

• Qualified candidates will possess 3-5 years experience providing architecture or construction management services on large institutional facility projects and programs.
• Knowledge and experience with the utilization of BIM technology in the design and management of complex projects and large project teams is desired.
• Experience with BIM, Revit, and or other related architecture design and modeling programs and technology is necessary.
• Knowledge and experience with construction management procedures, means, and methods.
• Good communication, writing and computer skills are essential.
• Bachelors degree in Architecture, Engineering, Construction Management or related field is required.
• Ability to communicate in Arabic (speak/write) is a plus.

About Vanir:

Over the last 30 years Vanir Construction Management's progressive growth and quality of service has developed this organization into the most respected and recognized provider of construction management solutions. As we continue to grow into new areas and markets, our focus is to remain the same, meet the needs of our clients, and the communities in which we work.

Equal Opportunity Employer M/F/D/V

TO APPLY: www.vanir.com/careers/ourpeople.aspx
Reference#: VAPMOS963


http://lexington.craigslist.org

Revit Modeler Needed (Downtown Lexington Kentucky)
Freeland Harris Consulting Engineers needs a Revit modeler/detailer for contract work. This position will likely turn into a full-time employed position if the candidate performs well. Please send resume to my email address.


Architect/Intern Architect (South Lexington)
Architect/Architect Intern. 3-5 years' experience. Must be proficient in AutoCAD; experience with Revit a plus. Temporary position. South Lexington firm. Send resume, cover letter and 3-5 references.


http://littlerock.craigslist.org

Project Architect (Memphis, TN)
Looney Ricks Kiss is a nationally recognized design firm built around a collaborative team of architects, urban designers, planners, interior designers, and environmental graphic designers who believe that great places are created through the integration of all these disciplines.

LRK is currently seeking Project Architects to join our team in Memphis, TN. Responsibilities include producing design development and construction documents in AutoCAD or Revit from conceptual drawings, assisting in conceptual and schematic design, managing production work with a high level of technical accuracy.
¬
The ideal candidate must have 5+ years of proven experience in all phases of the design process, preferably with multi-family residential and/or mixed-use projects. Must possess a comprehensive understanding of building technology and structures; and have outstanding communication and client interaction skills. Demonstrated problem solving skills and the ability to lead a project team on a complex project or work independently on a small project are required. Proficiency with AutoCad, Revit, InDesign, PhotoShop, SketchUp Pro and Microsoft Office Suite is a must. Degree in architecture required. Architectural license and LEED AP preferred.

This is your opportunity to join a talented team of design professionals. LRK offers professional growth and an excellent benefits package. . . in a friendly, creative, and positive work environment. For more information on LRK, please visit www.lrk.com.

Interested applicants should respond to this ad by submitting a cover letter, resume and three professional references.

EOE

http://losangeles.craigslist.org

Structural Engineer - Project Engineer
Project Engineer

For over 30 years we are providing full service structural engineering and consulting to some of the nation's largest and most successful homebuilders and developers, and are looking for motivated individuals to join our team. Please see below for the position requirements and qualifications.

- BS Degree in Structural, Civil or Architectural Engineering, MS a plus
- 5-7 years of structural design experience with all types of materials including: Wood (Type III & V), Concrete, Masonry, & Steel.
- Strong structural design capability
- P.E./S.E. preferred
- Strong understanding IBC, UBC, City and County of Los Angeles codes
- Strong understanding of generally accepted construction practices
- Excellent time management
- Exceptional organization and communication skills
- Ability to manage multiple projects and work under constrained deadlines
- Good working knowledge of engineering software - ETABS, Woodworks, Enercalc, RISA, SAFE, Autocad, Revit, and others.

Must have the ability to collaborate and thrive in a team environment, and value continued professional growth and development.


Engineering / CAD Designer (Los Angeles)
A low voltage systems contractor in the greater Los Angeles area is seeking a highly motivated professional CAD drafter for an immediate position.

As a well established specialty contractor (in business for over 20 years), we are looking to add an individual to our engineering team. We are seeking an experienced professional who will be able to contribute immediately.

Some of the systems which are included in our area of expertise include:

- Audio Visual
- Access Control
- CCTV, TV
- Voice-Data
- Public Address
- Intrusion/ Security
- Fire Alarm

All candidates must have experience with the following software's/ tools:
- Auto CAD (Revit, MEP,x-ref, attributes, blocks and layers)
- Working knowledge of MS Office (Excel, Word)

Candidates must be organized, detail oriented, have the ability to work in a team environment and meet project dead-lines.




 Autodesk Revit Architecture (Torrance)
Autodesk, the market leader in Architecture, Engineering, and Construction (AEC) software, announced the "Autodesk Assistance Program". This program allows recently displaced workers to obtain training and certification at little or no cost (no cost is through Autodesk only). If you are currently not working or are a distressed company, you qualify for this program.

AEC Factory is an Autodesk Authorized Training Center located in Southern, CA focusing on the AEC market.

Every class is taught by a Autodesk Certified Instructor.

AEC Factory offers Assistance Program training classes, on-site, for a nominal fee.

Free on-line training is available through Autodesk and you must register with them at http://students.autodesk.com/?nd=home . AEC Factory does not provide the online training.

This fee-based training is available for both non-working individuals and those who have a shortage of work.

Each Student can also access a 13 Month Student License of AutoCAD or Revit Architecture 2011 through Autodesk.

Note: Student software is available through Autodesk via www.autodesk.com/assistance (AEC Factory does not issue the software)

Currently offered classes:

Revit Architecture 2012 - Fundamentals February 6-8 (3 Days) from 8:30am to 4:30pm

**AutoCAD and Revit Certification available.**

For more information and class schedules, visit our website at www.aecfactory.com or call 800-878-1877 to speak to someone who can answer your questions.


Project/Senior Designer (Newport Beach, CA)
Lionakis is currently seeking a Project/Senior Designer in our Newport Beach office. To view a full job description and apply for this position, please visit our website at www.lionakis.com.


About Us:

Lionakis is a multi-disciplined design firm -- architecture, engineering, planning, interior design, and sustainability - that is focused on delivering high-quality and inspirational projects in several core markets, including Education, Healthcare, Civic, and Commercial.

• Solid Performance--Lionakis is ranked in the top 25 of California's leading architectural firms.

• Relationships--Over 80% of our projects come from repeat clients. We believe they are a testament to our success.

• Design--We bring our clients' visions to reality through cutting-edge technology and sustainable design solutions. At the heart of our design is a passion for solutions that work.


Job Summary:

We are currently seeking a Project/Senior Designer in our Newport Beach office. This individual must have a minimum of 5+ years of architectural design experience and demonstrate a very strong knowledge of Revit.


Essential Functions:

• Will become the "Revit Champion" within the Newport Beach office, supported by the Lionakis Design Technology team in the Sacramento office.

• Responsible for development of CAD design and documentation of drawings; mentors/coaches less experienced staff on CAD-related issues.

• Responsible for development and maintenance of BIM design; mentors/coaches less experienced staff on BIM-related issues.

• Responsible for project research and its incorporation into the project; coordination of specifications.

• In conjunction with project leader, develops and produces solutions for design problems; incorporates code research and agency coordination.

• Responsible for construction administration for projects; engages senior staff in problem solving.

• Responsible for coordination of consultants consistent with scope of work.

• Mentors/coaches less experienced staff with good time management in completing tasks on schedule.

• Assists project leader to ensure commitments made to clients are consistent with scope of work and supports project leaders in directing less experienced staff to accomplish project goals.

• Directs less experienced staff in office standards for BIM, design, quality control, and production.

• Reviews and evaluates documents for accuracy and coordination for project team.


Knowledge, Skill, and Experience:

• Bachelor's degree in Architecture.

• 5+ years architectural design experience.

• 5+ years Revit experience (including model setup and development).

• Ability to mentor others in Revit.

• Experience with Healthcare projects preferred.


EOE m/f/d/v




 Project Manager/Architect (Bilingual Mandarin/English Required) (Downtown)
Since 1943, NBBJ--a leading global architecture and design firm--has helped companies and organizations create innovative places. The firm has a long-standing history of transformational designs and is dedicated to actively pursuing sustainable solutions that contribute to a more livable world. NBBJ has nine offices worldwide: Los Angeles, Seattle, San Francisco, Columbus, New York City, Boston, London, Beijing, and Shanghai.

NBBJ Los Angeles is seeking an experienced Architect/Project Manager with 12+ years of experience to lead large and complex international projects in Asia. The ideal candidate will have extensive building experience, managerial skills and bilingual English/Mandarin skills. Candidates must be able to lead work efforts of others, oversee the production of project deliverables, and interpret client needs. Bilingual Mandarin/English speaking ability is required.

Skills & Qualifications

• B Arch degree required; M Arch preferred
• Minimum 12 years of professional experience in Architecture
• Extensive project management and building experience
• Architectural License preferred; LEED Accreditation a plus
• Bilingual (English/Mandarin) is required
• Previous experience working on complex projects in all phases of design
• Excellent communication skills and effective client relationship skills
• Strong leadership skills to lead projects in a collaborative team environment
• Knowledge of Revit / AutoCAD
• Ability to manage multiple projects and multiple deadlines
• Ability to travel, domestically and internationally


To apply please see our website at: http://www.nbbj.com/#join/openings


NBBJ is an Equal Opportunity Employer.



 Architectural Drafting person needed (Hollywood, Ca.)
A growing real-estate investment firm in Hollywood, CA is looking to hire an Architectural draftsman to join our development team. Must have experience with the preparation of construction documents for

1) HIGH END SINGLE FAMILY 2) MULTI FAMILY HOUSING AND MIXED USE

Full time in house only. No outside consulting arrangements. Computer equipment and AutCad, Revitt,software provided.

Basic Qualifications

3-5 years experience in an architectural office -- Production of construction documents
Experience w/ AutoCad , Revit, SketchUp, Photoshop and MS Office
Experience with high end single family residential
Experience with mixed--use projects
Experience with multi-family projects
Experience with Los Angeles City Planning and Building departments -- is a plus
Experience with other southland cities Planning and Building processes -- is a plus



 Entry Level Architect (Century City)
StudioBWA is an architecture firm based in Century City specializing in large high-end modern residential, institutional and urban design. We are a design-oriented firm that prides ourselves on getting projects built.

We have an immediate opening for a highly motivated entry level architect to work on projects at all stages of development, who is willing to take on responsibility and grow with our team. Candidates must have strong design skills, demonstrated proficiency in Auto Cad and 3d modeling (proficiency in Revit is a plus), and versatility in design representation. The right candidate will assume a hands-on approach, working on projects in various phases of completion and assist the Principal with tasks that include:

• Material research and sample sourcing
• Code research and city submittals
• Drawing coordination and picking up redines
• Drawing details
• 3D Modeling
• Organization
• Portfolio and web content development

The successful applicant's qualifications must include:
• A professional degree in architecture from an NAAB accredited school
• Experience in construction documents and detailing
• Strong design and graphic abilities
• Excellent communication and organizational skills (English required)
• The ability to condense, categorize, and present research and ideas
• Knowledge of sustainable building practices and/or LEED accreditation is an asset
• Proficiency in Auto Cad and 3d modeling (proficiency in Revit is a plus)

To apply, please send cover letter, resume and work samples in a single PDF of not more than 5MB to info at studiobwa dot com, with "Resume" in the subject line.



 Project Architect (Pasadena, CA)
Title:
Project Architect

Location:
Architecture firm in Pasadena, California

Requirement: Must be licensed in the state of CALIFORNIA or in the process of obtaining a CALIFORNIA license

Description:
This role interacts with all members of the firm and requires daily problem solving, time management, multi-tasking and a great attitude under pressure. Frequently works on one or more projects at a time. Well-developed organizational and communication skills and attention to detail are required.

Provides supervision and quality-control oversight of project team by providing design support and interface with project manager/designer. Additionally, will direct project research, documentation, approval and project construction administration. Provides additional project support as necessary.

Required Skills:
California Architecture License or in process of receiving
California Bachelors degree in Architecture or equivalent work experience (8 years+)
Strong experience in CAD (2008 or newer preferred)
Experience in Healthcare and Hospital related projects (3-5 years preferred)
Experience working with the Office of Statewide Health Planning Department (OSHPD)
Thorough knowledge of architectural drafting
Proficiency in Microsoft Office programs such as Word and Excel
Strong professionalism and interpersonal skills
Strong organizational skills

Preferred Skills:
Working knowledge of REVIT software and BIM processes
Working knowledge of Microsoft Project
Working knowledge of detailing, building materials, codes and construction

Applicants:
We offer competitive pay as well as medical, dental and paid vacation benefits. Relocation expenses are not covered for this position. If you are interested in applying, please submit your resume and cover letter to the email provided.












 Intermediate Designer (Culver City)
Hodgetts + Fung Design and Architecture
www.hplusf.com

Job Description: Hodgetts + Fung is looking to hire an Intermediate Designer. Candidates must have at least 5 years of experience in architecture. Specifically with a background in both the design and construction of civic and institutional architecture. The ideal candidate will work harmoniously in a collaborative team oriented environment. Must have a strong mastery of Rhino, The Adobe Creative Suite, and some experience with Revit. Interested candidates must send resume's, cover letter and portfolio sample to mailbox@hplusf.com

Job Title: Intermediate Designer
Job Location: Culver City, California



 Intermediate Interior Designer (Culver City)
Small architecture firm specializing in educational/commercial projects seeks an intermediate interior designer with a degree in Interior Design and 5 years of experience.

Responsibilities:
- Selection of finishes, materials and furniture.
- Visual/oral presentations of design schemes to clients.
- Working with senior staff in creating design layouts, finishes and schemes.
- Working with senior staff in implementing designs into construction document set.
- Maintaining the resource library with current materials.
- Primary contact person for vendors.
- Ability to multi-task and be flexible with interior/architectural tasks.

Knowledge:
- Knowledge of ADA codes
- Knowledge of materials and finishes
- Ability to set priorities and meet deadlines
- Knowledge of AutoCAD and Revit
- Excellent communications skills

Other:
- Adobe Programs a plus
- LEED AP a plus
- NCIDQ certification a plus



 Electrical Engineer/Designer (Pasadena, CA)
This Company is a leading design engineering firm offering exceptional engineering services with offices throughout California, Arizona, Texas and Colorado. We are seeking motivated Electrical Engineers and Designers. The ideal candidate will have a minimum of 5-10 years experience with California professional registration (preferred). Design experience with institutional, commercial, educational and healthcare projects is highly desired.

• Amusement park experience or REVIT experience a MUST!!!!!
Experience on electrical systems design for Buildings
• Familiar with California standards CEC, CBC, NFPA & Title 24
• Design experience: Lighting, Power, Low Voltage, Fire Alarm, Voice & Data
• Familiarity with Auto CAD
• Professional license/affiliations PE (Professional Engineer), RCDD, LEED (a plus)
• Education: Bachelor of Electrical Engineering (for engineering position)

Must have excellent oral and written communication skills. We offer a competitive salary and an outstanding benefits package including 401k. If you are interested in being part of a growing team of professionals and seeking to raise the bar in design engineering services, please submit your resume and cover letter.


HVAC Design Engineer / Mechanical Engineer - (Glendale, CA Office) (Glendale, CA 91201)
Open Position: HVAC Mechanical Engineer / HVAC Design Engineer (2 -5 Years Experience Needed)

Office Location: Glendale, CA 91201(near Downtown Los Angeles)

Compensation: Highly competitive employee compensation package. Pay rate is dependent on experience level and open to negotiation.

Highly respected employee owned contractor specializing in the areas of heating, ventilating, air conditioning, refrigeration, process piping, plumbing, building control systems, as well as service retrofit and maintenance; actively seeks HVAC Mechanical Engineer / HVAC Design Engineer to join our thriving Glendale, CA branch office. This is a full time long term employment opportunity to join our award winning firm.

We are a fully integrated company with complete in-house HVAC & Plumbing engineering, fabrication, installation, commissioning and service capabilities. Our integrated delivery system allows us to provide our customers with the most practical, cost effective solutions for their particular mechanical and control system requirements. Our firm is licensed in the States of Arizona, California, Florida, Hawaii, Idaho, Nevada, Oregon, Utah and Washington. For 75 years, owners and builders have selected us to design, install, and maintain over 250,000 mechanical projects. We are one of the largest and most experienced environmental and engineering firms in the West, and among the top three nationwide.

HVAC Mechanical Engineer / HVAC Design Engineer role and responsibilities:

As an HVAC Mechanical Engineer / Design Engineer, you will be involved in all aspects of the HVAC design / build process. From project conception through the details of design and field coordination, you will work with our staff of experts to obtain a practical knowledge and experience unmatched in this exciting industry. Examples of HVAC installations span the full spectrum from the simplest commercial building "package system" to the most complex high purity manufacturing process. Among other activities assigned, you will have the opportunity to apply your engineering expertise on such typical duties as:
* Project planning
* Conceptual design through construction drawing development
* LEED certifications
* Economic & energy analysis
* Load calculations, design and layout of equipment, duct and piping systems
* Applications engineering including psychometrics, refrigeration, acoustics, and controls systems
* Coordination of design and installation with Project Management, Construction and Service departments
* Field engineering: assist with project execution, trade coordination, scheduling, document management and problem solving
* Computer 3D modeling of HVAC systems utilizing the latest modeling software
* Estimating and proposal writing, client interaction

HVAC Mechanical Design Engineer / Project Manager Qualifications and Experience Requirements:

*Bachelors of Science degree in Mechanical Engineering

* EIT Certification or P.E. License are a plus, not required.

* Must have (2) two to (5) five years of HVAC Mechanical Engineering Design experience working for a mechanical consulting or design building consulting firm.

* Must have a good understanding of HVAC Mechanical design fundamentals and systems applications

* Familiarity with Building Codes is a plus

* Proficiency in load calculations, systems design, layouts and trade coordination

* Proficiency in AutoCAD (or similar drafting software), load calculations & Energy Code compliance calculations (Trane Trace, etc.)

* Ability to interact effectively with others in team environments

* High sense of integrity

* Excellent leadership skills

* Excellent organizational and time management skills

* Excellent oral and written communication skills

* Self starter and strong desire to succeed

Reasons to join our team:

Professional development -- In addition to the unmatched experience and knowledge gained through working directly on a broad range of projects, our firm enhances your professional development through regular on-site training classes and technical seminars. We also offer tuition reimbursement for work-related education.
Opportunity for career advancement -- Our firm's entrepreneurial culture fosters rapid advancement of individuals demonstrating excellent skills in project execution and leadership. Opportunities include potential advancement to supervisory/managerial roles within the Engineering department and Project Engineering roles within our Project Group.
Enjoyable work environment - We have an unusually large number of employees who have been with us 20 years or longer, and for good reason -- we are an employee-owned company and a very successful group who enjoy a friendly and supportive atmosphere. At the same time, this best-in-class environment is 'young at heart' and very entrepreneurial, placing innovation and self-motivation in high regard.
Excellent compensation - In addition to a competitive salary, we offer a comprehensive benefits package that includes health and dental insurance, a 401(k) plan, disability insurance, paid holidays, vacation, and sick leave.

****WE ARE UNABLE TO PROVIDE EMPLOYEE VISA SPONSPORSHIP AT THIS TIME ****

HOW TO APPLY:

For immediate and entirely confidential employment / hiring consideration please email detailed resume and brief cover letter to our internal Engineering Division Lead / Hiring Manager by clicking the REPLY TO link at the top of this page. We will contact you directly for interview coordination.



PLEASE CLICK HERE TO VIEW ALL OTHER CAREER / EMPLOYMENT OPPORTUNITIES WITH OUR FIRM!





Terms: mechanical drafter, mechanical drafting, mechanical designer, mechanical design, HVAC, plumbing, piping, heating, ventilation, air conditioning, air conditioner, mechanical engineer, mechanical engineering, consulting, consultants, general contractor, general contracting, construction, HVAC system, HVAC systems, autocad, Auto CAD, revit, 2D, 3D, BIM, construction documents, construction document, production, tech, technician, operator, Glendale, Los Angeles, 91201, 818, Burbank, Hollywood, Alhambra, Pasadena, San Gabriel, Commerce, Altadena, CMI, Sutherland, ARUP, Jacobs, Critchfield, job, jobs, career, careers, employment, hire, hiring, airco, airsystems, western allied


Revit Project Designer / Drafting / Project manager (Ca, Fontana)
If you have an interest in working in a challenging, fast-paced, friendly environment, with excellent pay & conditions, we'd like to talk with you.

We currently have an opportunity for a full time position for someone with at least 3 years of Revit experience through completion of Construction Documents. AutoCAD and Photo Shop Skills are also recommended but Revit is a must. Must be able to take on and complete tasks by your self and/or with a team.

Andresen Architecture is a small office offering a wide variety of work and experiences. We offer the latest in technology and an open environment where personal responsibility and professional growth is nurtured. Excellence is pursued in every aspect of our practice.

Please submit resume, references and relevant work samples



 Senior Electrical Engineer-BIM/Sustainable (Sherman Oaks)
Los Angeles,California office of our firm is hiring a electrical engineer with an interest and/or experience in Sustainable design-relocation allowance:
Position: Sr. Engineer â€" Electrical Engineering

Firm: Confidential

Location: Los Angeles, CA


The Firm:

Company Description
With the belief that engineering components should enhance the architecture of a building, our client designs mechanical, electrical, and plumbing systems that are responsive to architectural goals, meet client’s budgets and technical expectations, and achieve additional measures such as energy efficiency, ease of maintenance, and system integration.

Job Description
Our client is seeking an electrical engineer with 6 to 10 years of industry experience with the proven ability to deliver complex sustainable electrical systems designs for medium to large size projects. The ability to communicate effectively with clients and architects is critical in the completion of a successful project and serves as the building blocks of long term relations.
Join our sustainable design oriented engineering team that provides engineered electrical solutions for progressive clients and architecture: complete electrical designs from concept to construction, perform engineering calculations using the appropriate software, and prepare reports and studies outlining the benefits of specific system types.

Key areas of Responsibility:

• Represent company at project meetings.
• Assist in developing project objectives, goals, and documentation policies.
• Develop electrical designs from concept through completion of construction. Prepare engineering design calculations, layouts and specifications.
• Prepare detailed engineering reports and narratives for submission directly to clients.
• Perform in-house peer review of engineering calculations, designs and specifications.
• Coordinate electrical design requirements with architecture, structure and other disciplines.
• Efficiently manage and direct internal project teams for various projects.

Key Skills:
• Strong oral and written communication skills providing clear explanations and directions to clients and team members.
• Clear concise, technical writing
• Strong Planning, organizational and leadership skills.
• Proficient with Microsoft Office.

Qualifications:

• Bachelor’s Degree in Electrical Engineering
• LEED Accredited Professional and previous experience participating in the LEED or other green rating system process.
• 8 â€" 10 years of related work as a Electrical Engineer designing electrical systems.
• Previous experience with a consulting engineering or A/E firm as an electrical engineer designing Electrical systems for Commercial, Educational (K-12 and Higher Education), Laboratories, Museums, Civic Projects, or Government projects (State or Federal).
• Proficient with building and mechanical codes.

Preferred:
• Experience and interest in sustainable building design.
• An appreciation and understanding of architectural design and how architects work and think.
• Experience with BIM (e.g. Autodesk Revit MEP) work flow.
• Ability to participate and lead 3D/BIM coordination sessions.
• Experience with lighting analysis and electrical system analysis (SKM) software and report development.

Apply and Upload resume to www.ndhsearch.com



 Architectural Staff (Santa Monica, CA)
Prestigious Santa Monica architectural firm specializing in high-end residential design is seeking an Architectural Staff. We are looking for a candidate with 3-5 years experience. Proficiency in Revit required. We offer a great working environment, excellent benefits,
and a competitive salary for the right candidate. Below are the Architectural Staff's responsibilities:

Responsibilities - Assist in various phases of design, development and construction primarily through drafting.

Design - to understand the project design and to prepare, and develop where required, drawings, models, images and other documents relating to the design and development of the project.

Project Duties - Attend periodic project and client meetings as the budget and project requires. Responsible for the accuracy of any drafting tasks assigned to them. To take responsibility, while working with the JC, SJC, PM or SPM, for specific areas of the project
development. Thorough knowledge and implementation of Office standard setups and sheets in compliance with company procedures and standards. To contribute or otherwise assist in project related responsibilities as required. Maintain up to date knowledge of project progress and
required tasks to be completed. Ability to take direction from senior employee. Ability to constantly communicate ideas to their superior to ensure that their direction is correct and time is not wasted. A professional or post-graduate degree in architecture or significant experience in the field of architecture.


Revit 2012 and AutoCAD 2012 (Mission Hills)
AutoCAD 2012 and Revit 2012 Training Plus FREE Software

North Valley Occupational Center located in Mission Hills is offering low cost CAD training. Why pay hundreds (if not thousands!) of dollars for a CAD drafting course, when you can train with an instructor who has 15 years of teaching experience and the latest software for $85 (20 weeks). Yes it sounds to good to be true but it is! With formal lectures and instructor one-on-one training, the course is ideal for the working professional and the beginner alike. Work at your own pace all under instructor supervision.

As a bonus students who enroll can choose between 30 Autodesk products to download for FREE including, AutoCAD 2012, Revit 2012, and Inventor 2012 to name a few. Come by and see for yourself the hands on approach and informative lectures given on a daily basis. A patient instructor in a relaxed and professional environment teaches the class.

Space is limited so sign up soon!

**END OF FALL SEMESTER SPECIAL GOING ON NOW**
Not sure if this class is right for you? Take it for a test drive.
Enroll now for the spring session and you can attend the remaining three weeks of the fall session for FREE.

AutoCAD and Revit Architecture Fundamentals -- A twenty-week session

Schedule: February 6, 2012 -- June 25, 2012

8:00am -- 10:00am Mon-Fri (Day)

10:15am -- 12:15pm Mon-Fri (Day)

5:45pm -- 9:00pm Mon-Thurs (Eve)

Class Fee: $85.00

Where: North Valley Occupational Center (LAUSD)
Room 103
11450 Sharp Avenue
Mission Hills, CA. 91345

Instructor: Alfredo Gomez

Send an email if you have any questions or visit the school website NVOC.ORG for additional information.



Project Manager - GSA (Downtown, Los Angeles)
Project Manager - GSA

Firm Name:
RAW International

Location:
801 S. Grand Avenue, Ste. 502, Los Angeles, CA 90017

Firm Profile:
RAW International, Inc. is an award winning, multi-disciplinary architectural design firm. www.rawinternational.com

Salary Range:
Commensurate with experience and abilities.

Job Description:
Seeking Project Manager to work with Principal to profitably manage and grow the company's GSA and local government practice:

• Project Development -- Respond to RFPs by developing scope of work, preparing proposals and negotiating contracts;

• Project Management - Plan, set-up and profitably manage scope of work, resources and deliverables. Proactively identify and communicate issues, work with clients to resolve and adjust work effort;

• Design and CADD -- Understand all aspects and phases of the architectural and production process. Create and produce quality design and construction documents;

• Project Team Management -- Manage up to 1-2 team members to profitably meet project's goals;

• Business Development -- Assist in developing successful client relationships for repeat business and pursuing new opportunities;

Job Requirements:
• Minimum, 10-12 years design and CD production experience with architectural, facility planning, interiors and feasibility study projects;
• 3+ years of recent GSA and federal government project experience;
• Federal government security clearance, or ability to obtain one;
• Very proficient with AutoCAD 2011 and M/S Office. REVIT ideal, not mandatory;
• Demonstrated project management, leadership and communication skills;

No relocation provided. Provide resume, design and production work samples, and writing samples (i.e., project correspondence, meeting minutes).

Contact Information: Please submit to HR Department of RAW International; email address: please use the craigslist email address provided.


http://louisville.craigslist.org

No item elements found in rss feed.

http://madison.craigslist.org

REVIT Technician (Dane County)
We are an Engineering design/consulting firm seeking a qualified REVIT Technician. This position is responsible for providing REVIT & AutoCAD design and support to the Project Engineer.

Strong oral and written communications skills, as well as professionalism are required for this position. Experience in engineering or architectural firm is highly desirable. Work experience on large, multi-faceted projects is a plus.

Please send cover letter and resume.

Must be US Citizen or permanent US resident.

Additional notes: Architects are over-qualified for this position and cannot be considered.



 Healthcare Project Architect (Madison, WI)
Flad Architects, a nationally recognized thought leader in the planning and design of cutting-edge facilities, is seeking a Project Architect to join our Healthcare team in Madison, Wisconsin. Responsibilities include generating concepts and translating them into final solutions, excellent team leadership/mentoring skills and proven success directing teams in all project phases required. Qualified candidates will have a minimum of ten years architectural experience, with at least five years of recent Project Architect experience leading multi-disciplinary teams and working on relevant healthcare projects. Demonstrated design, excellent presentation, written, verbal and graphics communication skills, and a solid portfolio are essential. Bachelors degree in architecture, professional registration and AutoCAD proficiency required. LEED AP and Revit experience preferred. Qualified candidates must submit a resume via the opportunities link on our website at www.flad.com. (http://www.flad.com/jobs/job_list). AA/EOE


Electrical Engineer (Madison)
Arnold & O'Sheridan, Inc. is a well respected, vision driven, full service consulting engineering firm. We are currently seeking an Electrical Engineer who will be involved in the application of engineering fundamentals to design of building Electrical systems. This is a developmental position in which the Engineer learns to apply theoretical knowledge to practical application.

Responsibilities include:

• Design Lighting, Primary and Secondary Power distribution and Fire Alarm systems for a variety of building types including commercial, industrial, healthcare, and institutional buildings.
• Design of the Various Special system such as Nurse Call, Access Control, Video Surveillance and Telecommunications cabling for a variety of building types including commercial, industrial, healthcare, and institutional buildings.
• Organizes and manages electrical design efforts for significant, multiple, simultaneous projects in either single or multiple disciplinary environments.
• Develops and maintains electrical project schedules and budgets.
• Coordinates and chairs project meetings for electrical project team.
• Edits and coordinates production of electrical specification sections.
• Ensures the level of quality for each project meets the standards established by the client and the company.
• Performs and/or coordinates the review of shop drawing submittals and posts modifications as needed
• Works closely with and coordinates work with other engineering disciplines

A qualified candidate must have a bachelor's degree in electrical engineering, and have a minimum of 5 years experience in the design of lighting, power distribution and communication systems for commercial, healthcare, industrial and institutional buildings. Wisconsin P.E. required and ability to obtain multi-state P.E. registrations desired. Candidate must have good communication and organizational skills. Working knowledge of a variety of computer programs including Microsoft Office and Navisworks also a plus and experience in AutoCAD and Revit preferred.

We offer advancement opportunities and an excellent benefit package including 401K, profit sharing, company paid health/dental/life insurance, opportunity for bonus and a generous PTO program.

To be considered for this position, please submit cover letter and resume to:

Sarah Adam, PHR
Human Resources
Arnold and O'Sheridan, Inc.
4125 N. 124th Street
Brookfield, WI 53005
http://www.arnoldandosheridan.com

Equal Employment Opportunity/Affirmative Action Employer



 HVAC Design Engineer (Sauk City)
Ramaker & Associates is seeking an HVAC Design Engineer to supplement our current MEP design staff. The right candidate will have experience in both design and AUTOCAD / REVIT drawing systems. Project types include Hospitality and Multi-Family Housing experience. The right candidate will participate in a team-orientated environment and have excellent verbal and written communication skills.

Qualified candidates should forward a cover letter, current resume and a salary history to :

employment @ ramaker.com

Mail to:

Ramaker & Associates. Inc.
Attn: Employment
1120 Dallas Street
Sauk City, WI 53583




 REVIT MEP (Madison)
Must know REVIT MEP. Have several positions from entry level to Management. Feel free to contact me if you have REVIT MEP experience.


Drafter/Designer (Madison)
Must know REVIT MEP. Have several positions from entry level to Management. Feel free to contact me if you have REVIT MEP experience.


REVIT Technician (Madison area)
A growing engineering design/consulting firm is currently seeking an experienced REVIT Technician to join our team. This position is responsible for providing REVIT design and support to the Project team as well as AutoCAD. They will provide demonstrated skill in the practical application of engineering design software, REVIT/BIM and AutoCAD; large project and multi-discipline coordination experience; and an understanding of successful business practices.

The successful candidate will be professional, articulate, possess a strong work ethic, be a team player, work well independently, have the ability to multi-task and have good attention to detail. Strong oral and written communications skills are required.

Experience in engineering or architectural firm is highly desirable.

Please send cover letter and resume.

Must be US Citizen or permanent US resident.

Additional notes: this is not an architectural position; it is a technical position. Architects are over-qualified for this position and cannot be considered.

http://maine.craigslist.org

Mechanical Engineer, HVAC Systems (Porstmouth, NH)
Mechanical Engineer, HVAC Systems

Staff Hunters is seeking to fill a Mechanical Engineering position to conduct Autocad/Revit design (HVAC & Plumbing) for a client in the beautiful, historic Portsmouth Seacoast area on a temp to hire or potential direct hire basis. In this position you will be responsible for the design of HVAC as well as plumbing and fire protection systems and have the opportunity to develop design skills related to high-performance building mechanical systems.

Requirements: Autocad/Revit expert, career track in Mechanical Engineering with a B.S. Degree in engineering, 1-3 years building mechanical system drafting experience, passionate about developing high quality HVAC, plumbing and fire protection systems. High organizational skills and great attention to detail are required.

The client offers competitive wages and benefits and a professional environment supporting development and recognizing achievement. This is an outstanding long-term career opportunity for an individual with a commitment to high quality, high-performance buildings.

If you are interested in this great opportunity to develop your career with an established and growing Seacoast engineering firm, send an MS Word copy of your resume to Kendra Palmer at Kendra@staffhunters.net.






 Precast/Steel Detailer (Portland, ME)
Accuracy!!! We are looking for experienced detailers to expand our precast and steel detailing staff. This is a high paced position that requires flexibility and the ability to handle multiple projects. Proficiency in ACAD is required, REVIT, Microstaion, Structure Works and or Tekla experience is beneficial.


http://memphis.craigslist.org

Project Architect (Memphis, TN)
Looney Ricks Kiss is a nationally recognized design firm built around a collaborative team of architects, urban designers, planners, interior designers, and environmental graphic designers who believe that great places are created through the integration of all these disciplines.

LRK is currently seeking Project Architects to join our team in Memphis, TN. Responsibilities include producing design development and construction documents in AutoCAD or Revit from conceptual drawings, assisting in conceptual and schematic design, managing production work with a high level of technical accuracy.
¬
The ideal candidate must have 5+ years of proven experience in all phases of the design process, preferably with multi-family residential and/or mixed-use projects. Must possess a comprehensive understanding of building technology and structures; and have outstanding communication and client interaction skills. Demonstrated problem solving skills and the ability to lead a project team on a complex project or work independently on a small project are required. Proficiency with AutoCad, Revit, InDesign, PhotoShop, SketchUp Pro and Microsoft Office Suite is a must. Degree in architecture required. Architectural license and LEED AP preferred.

This is your opportunity to join a talented team of design professionals. LRK offers professional growth and an excellent benefits package. . . in a friendly, creative, and positive work environment. For more information on LRK, please visit www.lrk.com.

Interested applicants should respond to this ad by emailing a cover letter, resume and three professional references.

EOE





 Revit Tutoring Needed (Memphis)
We are a small structural engineering company. We are starting to get into Revit and need some part time on site tutoring. We can work with you whenever you are available at your schedule. Please email, thanks.


Intern Architect or Architect with Revit experience (West Memphis, Arkansas)
JOB SUMMARY
Actively participate in the design of commercial, educational and/or healthcare facilities.

EDUCATION & EXPERIENCE
§ Bachelor of Architecture.
§ Experience in commercial /educational / healthcare construction types.
§ Experience with all aspects of architecture including project management, design, construction documents, client relations and construction is preferred.

SPECIFIC SKILLS
§ Autodesk Revit: 2-5 Years experience
§ AutoCAD

OUR FIRM
§ Firm established in 1963 offers the opportunity to work in significant projects.

http://miami.craigslist.org

LIGNE ROSET DESIGN ASSISTANT/INTERN (MIAMI)
Do you have a passion and talent for design? Have you learned AutoCAD and REVIT in school? Join our team at Ligne Roset where we represent award winning contemporary designer furniture. Ligne Roset is in search of a Design Assistant/Intern.

OUR COMPANY OFFERS:

Beautifully designed showrooms offering the best contemporary furniture in Miami, NYC and Philadelphia.
Opportunity to work with a clientele that appreciates the quality of our internationally recognized brand.
The best delivery team in the country.
Member of the Sustainable Furniture Council.

ABOUT THE OPPORTUNITY:

We are looking for talented, hardworking and self-motivated individuals to join our Miami Design team.

REQUIREMENTS

MUST be proficient in AutoCAD and REVIT.
Able to work weekends.

RESPONSIBILITIES & QUALIFICATIONS:

Responsible for helping put together large scope design projects with CAD/Revit.
Must have knowledge of product to support a fast-paced selling floor environment.
Assist in maintaining catalogs, fabrics and other related sales materials.
Perform in-home measure visits with Designers.


Senior Project Architect (Downtown Miami, Florida)
Design your career at ADD Inc! We are a dynamic 130-person national architecture, interiors, planning, and graphics firm with offices in Boston, Massachusetts and Miami, Florida. We design for corporate, commercial and mixed-use, residential, retail and entertainment, hospitality, and academic clients. As a member of the ADD Inc team, you'll work alongside the most talented professionals in the design industry in a high-energy, high tech firm that's dedicated to pushing your limits and helping you grow your career. ADD Inc prides itself on the quality of its projects and its people. In short, we hire the best and expect the best.

ADD Inc seeks a full-time Project Architect with 10+ years experience for our Miami, Florida office. This individual will be expected to lead project teams and to work on a variety of projects from design through construction administration. Our ideal candidate will have significant experience with large, complex urban projects. A combination of strong leadership, management and technical skills is a must. A degree in architecture and architectural registration are required. Top-notch computer skills are mandatory - Revit skills are highly desirable. You must be organized, work well under pressure, and able to juggle multiple responsibilities in a deadline-driven environment. A positive, proactive attitude, flexibility, dependability, and willingness to be a team player are necessities.

We offer our employees competitive compensation, and our top-notch benefits program is the envy of the industry. Our benefits include generous paid vacation and personal time, a 401(k) plan, health and dental insurances, company paid short- and long-term disability insurances, and life insurance. To prove our commitment to our employees' professional development, we have a tuition reimbursement plan, and we sponsor a multitude of training opportunities throughout the year, from computer skills training to courses in advanced management. Our corporate culture is unparalleled, and we believe that hard work should be rewarded.

If you are interested in joining the ADD Inc team, please forward your resume and cover letter, and work samples to:

Human Resources
ADD Inc
311 Summer Street
Boston, MA 02210
fax: (617) 661-7118
e-mail: hr@addinc.com

No phone calls, please! Applications will not be considered without work samples.

For more information on ADD Inc, our culture, services, projects, and career opportunities, please visit us on the Internet at www.addinc.com.

ADD Inc is an Equal Opportunity Employer.





 IMMEDIATE OPENING - Architect with Revit experience (Design District)
IMMEDIATE full time position available for architect with project experience in Revit at a fast-paced design firm located in the Design District.

Please do not reply to this ad if you have knowledge of Revit but no actual experience using it.
Please send your resume only -- we will interview any and all reasonable candidates and need to hire ASAP.
Thank you!


Electrical Engineer (New Orleans, LA)
Mechanical, Electrical and Plumbing (MEP) engineering consulting firm, located in the New Orleans area is seeking an electrical engineer to join our team. The candidate should have experience in the design of commercial, institutional and light industrial building construction.

The ideal candidate will have at least 3-5 years experience in electrical distribution systems & calculations, lighting & controls, electrical power, data & communications, design coordination and familiarity with electrical specifications.

Qualifications include:
BSE degree or PE (a plus), client interface skills, communication and management skills, proficient in AutoCAD and Revit (a plus), proficient in MS applications.

We are proud to have been recognized as one of the city's BEST PLACES to WORK for the last 2 years and for having received both local and regional technical awards for several of our designs.

Our company will offer -
A Signing Bonus based on qualifications, personality, and fit with our firm's corporate culture.
Relo expenses (to be agreed upon by both parties).

http://milwaukee.craigslist.org

Healthcare Project Architect (Madison, WI)
Flad Architects, a nationally recognized thought leader in the planning and design of cutting-edge facilities, is seeking a Project Architect to join our Healthcare team in Madison, Wisconsin. Responsibilities include generating concepts and translating them into final solutions, excellent team leadership/mentoring skills and proven success directing teams in all project phases required. Qualified candidates will have a minimum of ten years architectural experience, with at least five years of recent Project Architect experience leading multi-disciplinary teams and working on relevant healthcare projects. Demonstrated design, excellent presentation, written, verbal and graphics communication skills, and a solid portfolio are essential. Bachelors degree in architecture, professional registration and AutoCAD proficiency required. LEED AP and Revit experience preferred. Qualified candidates must submit a resume via the opportunities link on our website at www.flad.com. (http://www.flad.com/jobs/job_list). AA/EOE


http://minneapolis.craigslist.org

BIM/CAD Systems Manager - Life Time Fitness Inc.
Click here to apply for this BIM/CAD Systems Manager Job (Chanhassen, MN, US)

Chanhassen, MN, US

BIM/CAD Systems Manager-CHA01591

Description

Life Time Fitness is currently seeking a BIM /CAD Systems Manager to drive success in the Architecture Department.

Responsibilities:

- Lead the Architecture & Design Department in the transition from AutoCAD to Revit including setting up departmental BIM standards, SOP's and leading all Revit and supporting software implementation efforts.
- Assist in the production of construction documents by modelling BIM content, Revit families and prototypical details, automating routines to support standards and productivity, and drafting electronic drawings.
- Liaison with Life Time Corporate-IT and outside vendors for all departmental technology needs. Including but not limited to printers, software licenses, all software set-up and installation including programming, new hire workstation computer set-up and coordination.
- Develop AutoCAD and Revit Standards including BIM content and related families, layer management, line styles/line weights, printing standards, etc.
- Train co-workers and answer questions on all AutoCAD/Revit related issues. Troubleshoot and help determine solutions with software and hardware issues.
- Train, oversee and assist in the day-to-day activities of Revit project teams to ensure BIM standards are maintained in the creation of the Architectural Project Model and integrated with the other design disciplines including but not limited to Structural and MEP consultants.
- Develop and maintain an electronic detail-library or kit-of-parts system for managing prototypical BIM families, related content and architectural details.

Qualifications

Education:
- Two-year college degree in architectural drafting or related field
- Bachelors degree in Architecture preferred

Experience
- Five+ years experience in architectural design and drafting and BIM modeling.
- Must have an in-depth working knowledge of current BIM (Revit) versions with emphasis on implementation, creation of standards, related content and families.
- Two years experience in construction administration preferred
- Two years experience with commercial construction preferred

Licenses/Certifications/Registrations:
- Proficient use of Revit, AutoCAD, and Adobe Creative Suite.
- Autodesk Revit Architecture Certified Professional preferred.
- Experience with Sketchup and 3D Max preferred

Primary Location: : MN-Chanhassen - COR - Corporate
Schedule: Full-time
Shift: Day Job


HVAC Designer/Drafter (Minneapolis, MN)
Primestaff has an excellent contract-to-direct hire opportunity for an HVAC Designer/Drafter located in Minneapolis, MN. Looking for a junior-senior level HVAC Designer to work on plumbing and HVAC systems. Will be working on multi-family, commercial and higher education projects. Will be using AutoCAD.

Requirements:
- Must be highly proficient with AutoCAD; Revit experience is desired but not required.
- Minimum 2 years of drafting mechanical/plumbing systems.

Contact:
Colleen O'Neil
Senior Technical Recruiter
651-697-2121


Energy Engineer (St. Paul)

Energy Dept. Head

(Project Management & Business Development)

Primary Purpose:

The Energy Services Manager will lead the expansion of our energy department. Position requires a self-starter with excellent leadership, communication and people skills. Responsibilities to include sales and marketing, product and service development, providing direction and mentoring of staff.

The energy department currently offers the following services; existing building energy studies, building systems analysis, energy asset project planning, building modeling and simulation and tax deduction analysis.

Typical Duties:

The duties listed below are minimum requirements for the position, but are not all encompassing:

Provide leadership, supervision of staff and direction for the group.
Help define the department's business plan and, within defined parameters, utilize all of the firm's resources in such a way as to meet timetables, schedules, budgets and profit objectives.
Be responsible for the sales and implementation for Class 5's behavioral and operational energy-efficiency programs in the State of Minnesota as well as our Engineering, Inc.'s energy services.
Review existing facilities to identify energy-related enhancements for buildings and processes, quantifying the resulting energy and economic impact.
Conduct engineering studies and investigations resulting in written reports as needed for projects.
Coordinate and manage energy efficiency asset improvement projects with HEI's engineering staff.
Work in collaboration with local utility companies on rebates and incentive programs/studies, as well as with local, state and federal government agencies on energy-related programs.
Coordinate/perform Energy Star building performance evaluations
Report financial, budgetary and other performance goals related to work completed, including life-cycle costing analysis and simple payback calculations, building modeling and ensuring practices are put into place to monitor and collect payments.

Relationship to Others:

The Energy Manager is a member of our Leadership Team and reports to the company President.

General Requirements:

Advanced knowledge of building mechanical and electrical energy-consuming equipment, systems, and operations practices
Knowledge of utility rate structures, rebate programs, and energy management technologies, utility tracking, building modeling and simulation.
Demonstrated experience managing multiple complex projects simultaneously, including identifying, maintaining, and/or adjusting the scope and/or resources, and overseeing the formal planning, tracking and reporting of project performance.
Demonstrated supervisory experience.
Four to 10+ years of experience in energy management/engineering; strong HVAC background; experience with commercial energy studies, project development, life-cycle cost analysis, commissioning and building/system optimization.
Excellent oral and written communications skills and be able to present complex and/or technical information to a wide audience, and guide discussions toward mutually acceptable goals and outcomes.
A proven grasp of power point, word, outlook, and excel.


Preferred:

Master's degree in Energy Management or an Engineering discipline.
Registration as a Professional Engineer (PE), or a Certified Energy Manager (CEM) or equivalent.
Experience with energy simulation software (DOE 2, eQuest, Trane TRACE 700, or similar programs). Autocad/Revit experience a plus.


Revit Expert
Seeking an Architect or Architectural Designer who is very skilled in Revit and developing BIM.

Need someone to implement standards and be a department leader in Revit modeling.
Take existing libraries and manage construction documents pertaining to layers, line weights, and families
while working within BIM standards.

Serve as "go to" person within department for issues relating to AutoCAD, Revit, and programming install
of related computer software/hardware. Must be high-level performer in terms of commercial construction
documents and working with team members, vendors, and contractors.
Please email resume as a Word document attachment.


Electrical Designer (Minneapolis, MN)
Primestaff has a great contract-to-direct hire opportunity for an Electrical Designer located in Minneapolis, MN. Our client is looking for an Electrical Designer with 2-5 years of experience to work on retail and commercial projects. Must have previous experience working with AutoCAD.

Requirements:
- 2 year degree required
- Must be proficient with AutoCAD
- Revit experience is preferred but not required.
- Minimum 2 years of related experience

Contact:
Kellie Erickson
Technical Recruiter
651-697-2127


Architectural Revit Technician (Minneapolis, MN)
Primetaff has a great contract opportunity for an Architectural Revit Technician located in Minneapolis, MN. The right candidate will have a 2 or 4 year degree in Architecture or Architectural Drafting. Will work on wall sections and details on Revit for commercial, retail and educational projects.

Requirements:
- Associate's Degree in Architectural Drafting is required.
- 2+ years of experience
- Must be proficient with AutoCAD, Revit, and PhotoShop

Contact:
Colleen O'Neil
Senior Technical Recruiter
651-697-2121


HVAC Designer/Drafter (Minneapolis, MN)
Our Client needs a CAD Designer/ Drafter with Experience in Mechanical/ HVAC systems , plumbing and related systems.
Strong CAD skills are required and revit experience is a plus.
2 to 5 years experience drafting mechanical / Plumbing systems is required.
This is a contract to direct position.


HVAC Applications/Sales Engineer (Hopkins, MN)
Precision Air Products Co., a leader in ceiling ventilation systems for operating rooms since 1974, seeks an energetic applications professional to work as part of our sales team.
This individual will recommend ceiling layouts, diffuser selection, and act as a liaison between our rep network, clients, and internal operations.
The ideal candidate possesses a BSME with a background in HVAC ventilation; is proficient in AutoCAD and Microsoft Office; can read architectural plans & specifications, mechanical drawings, & electrical schematics; has excellent communication skills and the ability to speak in front of groups. Preference for a working knowledge of Revit. Some travel may be required.

Please send resume, cover letter and salary requirements to: hr @ precisionairproducts.com (No calls please.)



 Architectural Technician - Life Time Fitness Inc. (Chanhassen )
Click here to apply for this Architectural Technician II Job (Chanhassen, MN, US)

Chanhassen, MN, US

Architectural Technician II-CHA01634

Description

Prepares clear, complete and accurate working plans and detailed drawings from rough or detailed sketches. Upholds the fulfillment of Life Time Fitness' Mission Statement.

Responsibilities
- Makes final sketch of proposed drawings, checking dimensions of parts, materials to be used and the relation of one part to another
- Drafts electronic drawings using AutoCAD
- Updates detailed drawings and corrects problems on blueprints
- Creates drawings for new projects
- Utilizes knowledge of various machines, engineering practices, mathematics, building materials, and other physical sciences to complete drawings
- Inks in lines and letters on pencil drawings
- Creates color exhibits for submittal to local government agencies, land-owners and architectural control committees
- Draws finished designs from sketches
- Supports the architects as requested
- Develops and maintains system of prototypical details and standards.

Qualifications
- Two-year college degree in Architectural Drafting or related field
- Four-year college degree in Architecture preferred
- Four years experience with AutoCAD and prototypical drawings
- Four years experience with commercial construction projects preferred
- Working knowledge of Revit
- Working knowledge of various graphic rendering programs:
Sketch Up

Adobe Suite (photoshop, illustrator)
- Excellent customer service skills
- Ability to operate a personal computer
- Knowledge of standard office procedures and computer software
- Excellent oral and written communication skills
- Ability to effectively multi-task with tight deadlines independently and within a team environment
- Ability to define problems, collect and analyze data, establish facts, draw valid conclusions and recommend solutions
- Ability to follow-through on deliverables and pay attention to details in the midst of multiple projects and deadlines
- Proficient with AutoCAD operating software
- Knowledge of architectural drafting standards and conventions
- Knowledge of building systems and assemblies
- Knowledge of color rendering software used in the production of color exhibits

Primary Location: : MN-Chanhassen - COR - Corporate
Schedule: Full-time
Shift: Day Job


Architectural Drafter - Revit Technician (Minneapolis)

George Konik Associates

Architectural Drafter - Revit Technician

Job Description:

Architectural Drafter – Revit $18 – 25/HR Minneapolis, MN  3 Month+ Contract  Start ASAP

 

Our client, a leading architectural firm focusing on the retail sector is seeking an Architectural Drafter to assist with big box projects. You will work with a Project Architect to develop and detail final drawings using Revit, AutoCAD and other office tools.  In this fast-paced role, you will communicate closely with the architectural team to ensure projects and redlines are completed in a timely manner. 

 

This is an excellent contract position scheduled to start ASAP.

 

Qualifications:

·         Associates Degree, Architectural Drafting Technology required

·         Minimum Two (2) years of on-the-job Revit experience required

·         Big box retail project experience strongly desired

 

Local Candidates only please.

 

To network for future positions please visit:  http://www.linkedin.com/in/tomgoettl

 

Interested candidates please send Word resume ASAP to:  tom.goettl@georgekonik.com

 

 George Konik Associates, Inc. (GKA) has been a leader in the technical staffing industry for more than 35 years, providing the fastest and easiest link between employees and employers. GKA has specialized in placing professional, qualified personnel in Minnesota and western Wisconsin businesses since its inception and maintains a strong commitment to customer service.

 

About George Konik Associates:

Company offers a dynamic team environment with a great benefits package that includes medical, dental, vision, 401K, flex spend, life and PTO.

Excellent opportunity for professional growth and advancement!

Apply Now: http://ziprecruiter.com/cl/bf7e791d


Electrical Engineer (Minneapolis, MN)
Our client has a need for an Electrical Engineer in their engineering department.
Responsibilities:
Make calculations using formulas
Schematic layout of systems
Work on specialized drawings
Equipment selection and scheduling
Research code issues
Organize and maintain project files

Experience:
Minimum 2 years
Bachelor Degree required
Understanding of codes
Completion of certification is encouraged.
Revit is a plus.
This is a contract to Direct Position.


Electrical Designer (Minneapolis, MN)
Our client has an entry level position in their engineering department.

Duties:
Routine design tasks on assigned projects.
Problem solving
Data input
Research equipment selection from catalogues under direction of specialist.
Prepare drawings of designs orginated from sketches

Required:
Bachelor Degree from accredited school system is preferred
Revit is a plus.
Professional certification is encouraged
Knowledge of fire alarm, temperature control, smoke control, code reviews, fire protection, voice/ data, audio-visual and lighting systems, Low voltage.
This is a contract to direct position.


Healthcare Project Manager (Minneapolis, MN)
Our healthcare team designs environments for every age and every stage of life. Our approach to the health and life science environment bridges perspectives -- we design for the experience of the patient, nurse, physician, support staff and administrator in a way that reflects the provider's brand and the culture of the surrounding community. Our portfolio spans hospitals, clinics, specialty centers and laboratories. We are seeking an experienced healthcare Project Manager to join our growing team.

Responsibilities will include:

· Leading full-service project team, by working across all aspects of the design process, including project planning and concepts, programming, schematic design, design development, construction documentation & construction administration
· Evaluate and interpret program data to understand project requirements, client goals and culture
· Manage staff, project scheduling, work authorization, budgeting and quality control.
· Manage the client relationship and participate in targeted marketing efforts

What we're looking for:

· Quality minded, confident, self-motivated individuals
· Ability to work well under pressure
· Competency to prioritize effectively and adjust work accordingly to meet deadlines
· Adept at dealing with multiple projects ranging from simple to very complex.
· Must be able to multi-task and possess strong customer service skills
· Working knowledge of building codes & national healthcare regulations
· Exceptional problem solving abilities
· Excellent verbal and written communication skills
· Strong organizational skills
· Detail oriented
· A commitment to helping the team succeed

Qualifications:

Bachelor's degree in Architecture or Interior Design
Minimum of 10 years of project management experience in an architecture firm
Minimum 5 years healthcare project management experience
Experience working with large nationwide corporate clients is a plus
Proficiency in AutoCAD/ Revit and Microsoft Office Suite




BIM Revit Tech / AutoCAD / Solid Works Exp a Plus (East Metro)
Generates shop drawings using the AutoCAD system. Is Proficient and Excells in the use of AutoCAD Revit and BIM. Creates and maintains smart libraries, symbols, templates, and maintains accurate and error free drawings, material take offs and client /supplier coordination. Is responsible for checking own work, work of the team, and ensuring the accuracy of the work. Produces drawings to include plans, elevations, details, embeds, layouts, tag, parts, take-offs, 3D, dies and other specifications related to the drawings. Travel out as a contract employee providing drafting services to clients. Technician complies with company policies regarding system design, CAD and drafting standards.
Applies CAD filing systems for projects, identifies design and scope changes and notifies project team leader of questions or missing information. Technician checks drawings as required for format, spelling, coordination with architectural, structural and other trades, dimensions, quantities, etc. Participates in project meetings, assists other team leaders and members (field, warehouse fabricators, suppliers, etc.) as required. Technician calculates figures to convert design dimensions to resizing dimensions specified for subsequent production processes. Technician keys in specified information to produce graphic representation (hard copy) of design for review and approval by engineering and design staff.

Works well with others. Can be comfortable drawings parts, checking parts for accuracy, and Working in Revit when needed

Employee Benefits
We offer superior benefits as an employer.
Paid Time Off and Holidays
Seven paid holidays a year and may introduce additional floating holidays at its discretion. Each employee accrues Paid Time Off during the year.
Direct Deposit
Your money is deposited safe and securely every pay day.
Health Benefits Medical Coverage
Plan options to choose from that best fit you. PGI pays a portion.
Retirement (for eligible employees)
401K -- Dollar/dollar match up to 3% and additional fifty cents / dollar match up to 5% total.
Additional Benefits
Optional Dental Benefits
Health Care Flexible Spending Account*
Credit Union
529 College Saving Plans
Employee Assistance Programs
Free Online Training Courses
Adoption Assistance*
Educational Assistance Program*
Commuter Benefits Program*
Optional Life Insurance
Optional Dependent Life
Optional Disability Insurance
Marketplace of merchant discounts



 Revit Technician (Minneapolis)
We have an immediate contract opportunity for an experienced Revit Technician. Must have previous understanding of how buildings go together and 1+ years of Revit experience with architectural projects.

Must haves:
1. Experience with the most recent version of Revit (2011)
2. Experience on at least 3 complex, non-residential BIM projects

**Please include resume when applying.


Mechanical Designer-HVAC (Plymouth)
Due to increased sales, our client has an immediate opening for a Mechanical Designer with HVAC experience. This is a contract to hire position and the following requirements are desired:

** Retail experience
** 3+ years HVAC experience
** TRACE experience a plus
** CAD proficiency(Revit, AutoCAD and/or Microstation)


Electrical CAD Tech/Revit
Strom Engineering is seeking an experienced (3+ years) Electrical CAD Tech with low voltage experience, e.g. fire alarms, security, audio visual, voice data systems. All work will be done on Revit software. Must be efficient, able to produce quality work, be self-motivated and reliable.
Qualifed applicants only to apply--please send Microsoft Word-formatted copy of resume.


BIM/CAD Systems Manager - Life Time Fitness Inc. (Chanhassen)
Click here to apply for this BIM/CAD Systems Manager Job (Chanhassen, MN, US)

Chanhassen, MN, US

BIM/CAD Systems Manager-CHA01591

Description

Life Time Fitness is currently seeking a BIM /CAD Systems Manager to drive success in the Architecture Department.

Responsibilities:

- Lead the Architecture & Design Department in the transition from AutoCAD to Revit including setting up departmental BIM standards, SOP's and leading all Revit and supporting software implementation efforts.
- Assist in the production of construction documents by modelling BIM content, Revit families and prototypical details, automating routines to support standards and productivity, and drafting electronic drawings.
- Liaison with Life Time Corporate-IT and outside vendors for all departmental technology needs. Including but not limited to printers, software licenses, all software set-up and installation including programming, new hire workstation computer set-up and coordination.
- Develop AutoCAD and Revit Standards including BIM content and related families, layer management, line styles/line weights, printing standards, etc.
- Train co-workers and answer questions on all AutoCAD/Revit related issues. Troubleshoot and help determine solutions with software and hardware issues.
- Train, oversee and assist in the day-to-day activities of Revit project teams to ensure BIM standards are maintained in the creation of the Architectural Project Model and integrated with the other design disciplines including but not limited to Structural and MEP consultants.
- Develop and maintain an electronic detail-library or kit-of-parts system for managing prototypical BIM families, related content and architectural details.

Qualifications

Education:
- Two-year college degree in architectural drafting or related field
- Bachelors degree in Architecture preferred

Experience
- Five+ years experience in architectural design and drafting and BIM modeling.
- Must have an in-depth working knowledge of current BIM (Revit) versions with emphasis on implementation, creation of standards, related content and families.
- Two years experience in construction administration preferred
- Two years experience with commercial construction preferred

Licenses/Certifications/Registrations:
- Proficient use of Revit, AutoCAD, and Adobe Creative Suite.
- Autodesk Revit Architecture Certified Professional preferred.
- Experience with Sketchup and 3D Max preferred

Primary Location: : MN-Chanhassen - COR - Corporate
Schedule: Full-time
Shift: Day Job


Residential Drafter (North Metro)
The Design Department for a Residential Builder is searching for a focused, professional Drafter with experience in the custom home/production home building industry. We are looking for an extremely detail oriented individual.

Responsibilities
•Assumes the role of Drafter for custom and production homes. Works closely with design team, job superintendents, and Leadership so that house plans are accurate and detailed, and variances are minimized.
•Produces full house plans for all homes sold and speculatively built. The job plans include foundation, floor plans, elevations, lighting, details & sections, and some structural elements.
•Assists in the maintenance of plan database consisting of master plans, and plan process information (dates, milestones, etc.)
•Ensures house plans and options match contract documents.

Requirements/Qualifications
•4+ years minimum experience in similar position within the homebuilding industry.
•2 or 4 year Degree in Construction, Drafting, or other related field.
•High level of understanding drafting software.
•Experience with most recent versions of Softplan and/or AutoCAD Architecture strongly preferred. Will consider experience with Revit and other 3D software.
•Knowledge of the homebuilding process.
•Strong MS Office skills.
•Strong Structural knowledge a plus.
•Strong work ethic and Motivated.
•Well Balanced and Positive Attitude.
•Detail oriented and Well Organized.


Compensation and Benefits
We offer a great compensation package including:
•Health insurance
•Life insurance
•Reduced dental insurance
•Paid vacation (PTO)
•401k plan
•Paid holidays



 Mechanical Engineer (Minneapolis, MN)
Primestaff has an excellent contract opportunity for a Mechanical Engineer in Minneapolis. Will work with internal engineering team members to design building mechanical systems (HVAC, plumbing, fire protection, controls) for properties including stores, distribution centers, and corporate buildings. All phases of design from conceptual to construction administration could be required. May also be involved in trouble shooting building mechanical system operations. Building types include new, remodels, and retrofits.

Requirements:
-5 years experience in building design and operations
-CAD experience in Autodesk and/or Microstatio
-Revit modeling experience preferred
-Proven collaborative work with building design teams
-Strong communication skills

Contact:
Colleen O'Neil
Senior Technical Recruiter
651-697-2122


Mechanical Engineer (minneapolis, MN)
Our client has a need for a Mechanical Engineer.

Responsibilities:

Manage projects from conception to completion mechanical systems (HVAC, Plumbing & Fire Protection) new installation and retrofit for major commercial and institutional building projects
Lead, coordinate, coach and mentor the design team new and retrofit projects
Develop and monitor design strategies and control systems for building construction to maximize efficiency of building systems
Manage multiple projects simultaneously providing leadership, client input/feedback, and general direction
Provide technical expertise on sustainable building solutions
Develop strong relationships with clients, industry affiliates, engineers, technologists, technicians, and construction personnel
Manages all aspects associated with client relationship management and project service delivery
Meet with clients regarding projects, progress reporting, and the resolution of issues, as required
Oversees the entire project life cycle, from preliminary services through project implementation
Coordinates the preparation of engineering specifications and drawings, quantity and cost estimates
Preparation of reports, proposal content, and tender/bid submissions, budgets, project plans, and other supporting documentation, as required
When necessary, involvement with a variety of agencies for project approvals and permitting purposes
Estimating and scheduling projects, procurement of materials, and update / maintenance of company-related resources
Negotiate key contracts and supplier agreements



Qualifications:

Degree or diploma in Mechanical Engineering
Minimum 7 to 10 years of Mechanical Engineering experience
Minimum 5 plus years of experience in the detailed design of mechanical building systems such as HVAC, Plumbing and Fire Protection
Knowledge of Building Control and Automation systems is desirable
Demonstrated experience project managing projects with a strong focus on sustainable design
LEED Accreditation highly desirable or familiarity with LEED concepts
Experience with building energy audit is an asset
Comprehensive working knowledge of Microsoft Office and experience with AutoCad drafting are required. Experience with ReVit would be considered an asset
Excellent verbal and written communications are essential



 Electrical Drafter (St. Paul, MN)
Primestaff has a great contract-to-direct hire opportunity for an Electrical Drafter in St. Paul. The right candidate will have experience with Revit and experience with electrical systems (power distribution and lighting). Will be working on projects that include data centers, hospitals, commercial properties, and high rise residential areas.

Requirements:
-Experience with Revit required
-Experience with power distribution and lighting required

Contact:
Kellie Erickson
Technical Recruiter
651-697-2127


Autocad Drafter (Minneapolis)
Haldeman Homme, Inc. has an immediate need for a CAD Engineer at their Minneapolis, MN headquarters. You will have a great opportunity to work for a company that offers only the highest quality products and service. Our clientele include contractors, architects, health care facilities, colleges and universities. We provide design, sales and service of laboratory equipment, classroom and science casework, athletic flooring, material handling and storage equipment, filing systems and software, and technology education equipment and curriculum.

Responsibilities

· Provide CAD services using Sketch Up, Configura, AutoCAD 2009 and Autodesk Revit software.

· Demonstrate strong communication and interpersonal skills

· Support CAD team metrics.

· React and respond appropriately to new demands as a member of the CAD Services Team.

· Basic office management computer skills including Microsoft Word and Microsoft Excel.

Requirements

High school graduate; Two year degree in Architectural Drafting or equivalent experience and/or training.
In-depth, working knowledge of AutoCAD 2009 and Autodesk Revit a must.
An above average ability to work in a fast-paced team environment with multiple deadlines.
The successful candidate will possess excellent organizational, communication.
Self- motivated independent thinker, but still a good team player.



Structural Designer (Just South of Minneapolis, MN)
Primestaff has a great contract-to-direct hire opportunity for a Structural Designer just South of Minneapolis. Looking for a Structural Technician that has Revit experience. Looking for someone that has approximately 5 years of Revit Structure experience (at least intermediate level).

Requirements:
-Revit Structure experience
-5 years experience

Contact:
Colleen O'Neil
Senior Technical Recruiter
651-697-2121


Electrical Designer/Drafter (Northwestern Suburbs of Minneapolis, MN)
Primestaff has an excellent Contract-to-direct hire opportunity for an Electrical Designer/Drafter in the Northwestern suburbs of Minneapolis. Looking for someone that is highly proficient with both AutoCAD and Revit. Will be working with a mixture of retail senior housing projects. Looking for roughly 3-7 years of experience but will also consider a junior level engineer.

Requirements:
-AutoCAD and Revit
-3 to 7 years of experience

Contact:
Kellie Erickson
Technical Recruiter
651-697-2122


http://mobile.craigslist.org

Mechanical Professional Engineer (Mobile Area)
We are currently accepting resumes for qualified Mechanical Professional Engineers. Minimum of 4+ years of experience required. Project management experience, Military design and CADD/Revit software experience also required. Professional license required. To be considered forward a copy of your current resume, your salary requirements and if you are willing to relocate/travel or not.



 BIM/Coordination
I have the ability to do 3D models in AutoCADD or Revit for all disciplines. Offering clash detection or coordination as needed from engineered plans.

Email for further information


http://modesto.craigslist.org

No item elements found in rss feed.

http://montana.craigslist.org

No item elements found in rss feed.

http://monterey.craigslist.org

No item elements found in rss feed.

http://montgomery.craigslist.org

Mechanical Professional Engineer
We are currently accepting resumes for qualified Mechanical Professional Engineers. Minimum of 4+ years of experience required. Project management experience, HVAC design, Military design and CADD/Revit software experience also required. Professional license is required. Please do not apply if you do not possess a current PE license. To be considered forward a copy of your current resume, your salary requirements and if you are willing to relocate/travel or not.

http://nashville.craigslist.org

Project Architect (Memphis, TN)
Looney Ricks Kiss is a nationally recognized design firm built around a collaborative team of architects, urban designers, planners, interior designers, and environmental graphic designers who believe that great places are created through the integration of all these disciplines.

LRK is currently seeking Project Architects to join our team in Memphis, TN. Responsibilities include producing design development and construction documents in AutoCAD or Revit from conceptual drawings, assisting in conceptual and schematic design, managing production work with a high level of technical accuracy.
¬
The ideal candidate must have 5+ years of proven experience in all phases of the design process, preferably with multi-family residential and/or mixed-use projects. Must possess a comprehensive understanding of building technology and structures; and have outstanding communication and client interaction skills. Demonstrated problem solving skills and the ability to lead a project team on a complex project or work independently on a small project are required. Proficiency with AutoCad, Revit, InDesign, PhotoShop, SketchUp Pro and Microsoft Office Suite is a must. Degree in architecture required. Architectural license and LEED AP preferred.

This is your opportunity to join a talented team of design professionals. LRK offers professional growth and an excellent benefits package. . . in a friendly, creative, and positive work environment. For more information on LRK, please visit www.lrk.com.

Interested applicants should reply to this posting by submitting a cover letter, resume and three professional references.

EOE





 Electrical Engineer with Facility Design Experience (Nashville, TN)
Puckett Engineering, PLLC has an immediate opening for an electrical engineer/designer experienced in the design of facility electrical systems, such as lighting, power, mission critical, power quality, fire alarm, and other systems for various types of facilities, including a major focus on mission critical applications.

QUALIFICATIONS:
- BSEE degree or an acceptable associate's degree and related experience.
- At least 5 years experience in the design of facility electrical systems. Candidates with less than 5 years design experience will be considered if their design experience is augmented with other related experience like construction experience.
- AutoCAD and Revit experience is a plus.
- Construction experience in electrical installation work is a plus.

This is a great opportunity for someone wanting to grow and expand their career with a well established and growing consulting engineering firm.

Benefits include matching retirement plan, HSA health insurance, vacation, holidays, sick/personal leave, and more.

Send resume and/or questions to the above e-mail address. Additional information pertaining to the position will be sent to potential candidates.

Company Website: www.puckettengineering.com.













 Plumbing Designer (Nashville, TN.)
We seek a plumbing designer for our Nashville office. Experience with REVIT a must. The firm offers outstanding pay, and I mean really outstanding pay. Experience with Commercial and/or Healthcare preferred. If you are interested in getting paid what you are really worth, send your most current resume for immediate consideration. Any resumes will be held in strictest confidence, so no worries that your current employer will know that you are looking! I look forward to recievign your resume for immediate consideration. 2012 could be a really great year for you!


Architectural Drafter (Murfreesboro, TN)
Company: InSight CRE Services

Job Type: Architectural
Base Pay: $16.00 Hour
Other Pay: Per Project Basis

Manages Others: No
Relocation Covered: No
Industry: Architecture - Construction

Required Education: 2 Year Associate Degree Minimum in related field
Required Experience: 2 Years Minimum
Required Travel: Less than 10%
Location: Murfreesboro, TN 37128


Job Classification: Contract Employment through contracted staffing agency.
Contract Length: Indefinite
Job Description

InSight CRE Services is seeking an Architectural Drafter proficient with AutoCAD and familiar with Revit for one of our clients. Benefits provided are Unemployment Insurance, Workers Compensation, and Professional / Liability Coverage through the staffing agency. This position is available for immediate employment.

Job Responsibilities:

-Produce and revise architectural drawings, plans, elevations, details, and sections with guidance from Architectural Services Manager and or designated managers using field drawings, photos, and other supplied architectural materials.
- Must be able to work under tight deadlines.
- Must be a problem solver and team player with the ability to work independently as needed.
- Must be solutions oriented.

Must have:

1. 2 years RECENT experience as a drafter in Architecture or Structural field
2. Proficient with AutoCAD
3. Experienced with Revit
4. Ability to understand architectural and/or structural drawings
5. Must provide and utilize own laptop computer with AutoCAD software and/or Revit software

Opportunities for promotion do exist in the position.

Interested and qualified candidates are encouraged to respond to this posting. This position is open for immediate employment. Only qualified candidates will be contacted.

http://nd.craigslist.org

No item elements found in rss feed.

http://newhaven.craigslist.org

Structural Engineer (Fairfield County)
Structural Engineer/Designer minimum of 7 years design experience; EIT or PE a plus. Must have good customer relations skills and be able to follow through to take a project from conception to completion.

Develop contract documents for commercial, institutional and residential buildings with various structural designs consisting of steel, composite steel, light gauge steel, concrete, timber, heavy timber and masonry.

Field inspections and experience, contract administration, and proficient report writing skills critical. Ability to handle multiple projects both large and small is important.

Knowledge of RAM Structural System, RISA Technologies, Windows, familiarity with with Revit and AutoCAD is critical

Office located in Fairfield County; flexible working hours, excellent benefits



 Mechanical Engineer (Shelton, CT)
Fletcher Thompson, located in the Shelton, CT is looking for a Senior Mechanical Engineer with 8 - 15 yrs of exp. in HVAC and Building Systems. Highly capable, customer-oriented, team player interested in working on diverse & challenging building projects who have proven expertise, strong communication skills & proficiency in REVIT. Engineering degree required; professional registration preferred, but not required.

Fletcher Thompson offers highly competitive salaries, continuous learning environment, advancement opportunities and an exceptional array of benefits. EOE


Drafting Services or Software Training (Milford)
I am available for freelance drafting work in architecture but can draft for any profession or trade.

Homeowner services;
Complete home design,
Decks and additions,
Building department drawings

Architects and Contractor services;
Document existing conditions
Paper to CAD conversion
3D Modeling
Autocad or Revit software training.

My experience:
Bachelor of Architectural Engineering, 7 years Autocad instructor, 25 years using Autocad up to the current version, 3 years basic/intermediate Revit experience.
I am dependable, knowledgeable and professional. Resume and portfolio available upon request.

Thank you.

http://newjersey.craigslist.org

Structural Engineer (Kearny, NJ)

Title: Structural Engineer
Location: Kearny, NJ

Role: Light Gauge Structural Engineer

Our client is one of the nation's oldest producers of construction steel products, such as light gauge steel framing, wall studs, floor joists, and truss members is currently recruiting Structural Engineers for our growing organization.

Structural Engineer:
* Qualified candidates will have the ability to analyze light gauge steel framing systems and prepare shop drawings and calculations for stud walls, joists, roof trusses and connections.
* Licensed P.E. is required. Must be familiar with AutoCAD and Revit.
* In exchange for your talents, we offer a competitive salary and full benefit package.



Senior Structural Engineer (Rochester, NY)
Ravi Engineering & Land Surveying, P.C. is seeking a licensed Structural Engineer with experience in Building Projects. This individual will be responsible for technical direction and project management including development of structural concepts, strategies, designs, drawings, specifications and reports. Individual must be able to work independently and in teams, and be able to interface with clients and architects. Autocad experience is essential. Revit experience, as well as project history using computer analysis software is a plus. A Bachelor's degree and minimum of 8-10 years of experience working at an A/E consulting firm preferred. Our benefits include health, dental and vision insurance, professional development, paid time off and a 401k plan. Ravi Engineering & L.S., P.C. is an Equal Opportunity Employer. Please send cover letter and resume.


BIM Designer (Morristown, NJ)
Requires 2-3 years BIM experience using Autodesk Revit Software
Experience and training with 2-D and 3-D CAD Systems
Certified in BIM Revit 3-D experience and training

Bachelors in Engineering


Architect, part time to full time (Paramus, NJ)
We are an award winning architectural firm located in Paramus, NJ. We are expanding our staff due to meet the increasing list of projects we are working on, and anticipate in the near future, we are seeking a part time to full time architect with the following requirements::

- Holding a degree in architecture.
- Self motivated, to be involved in all phases of projects.
- Experience in designing new educational facilities.
- Experience with preparing construction documents, project specification, and reports.
- Experience working with Revit, with proven record of completed projects using Revit.
- Experience working with Word, Excel, PowerPoint, Auto Cad, and Adobe Photoshop.
- Excellent writing skills and ability to communicate clearly and effectively.
- A commitment to teamwork and to an integrated approach to project delivery

Position is open only to legal residents of the united states, no visa sponsorship provided.
Applicant should be within 20 miles of Paramus, NJ

Equal Opportunity Employer.



 Revit, AutoCAD operator (North Jersey)
These positions will contribute to develop REVIT families of mechanical components from existing 2d CAD drawings to the conceptual 3d models. You must have the ability to embrace bringing projects from start to finish and must thrive in a collaborative environment. Develop REVIT content including families with parametric, templates, schedules and details. Manage the REVIT workflow for all jobs at a high level. Knowledge of Naviswork is preferred, but not required.

Responsible for typical design coordination, and producing full sets of construction documents. Excellent REVIT and AutoCAD skills are a must.
These positions require at least a Bachelor of Mechanical Engineering, or equivalent. Min 4-6 years of overall experience.

Please include three professional revit samples references , and salary requirements.

http://neworleans.craigslist.org

Mechanical/Project Engineer (New Orleans)
New Orleans A/E firm is looking for a mechanical/project engineer with at least 5 years experience. PE is preferred. You will be working on a wide range of projects, including health care, education, entertainment, hospitality, institutional and industrial. Great communication skills are a must! Qualified candidates should have a BSME Degree, Autocad and Revit proficiency, great communication skills, a positive attitude and the desire to excel.


Electrical Engineer
New Orleans A/E firm is looking for an Electrical Engineer with at least 5 years experience to design power, lighting, and communications systems for health care, schools, hospitality, institutional and industrial projects.

Qualifications:

- BSEE Degree
- Professional Engineering License
- Autocad and Revit proficiency
- LEED accreditation
- Experience with client interface
- Great communication skills




 Structural Engineer (New Orleans CBD)
Structural Engineer Intern or Professional with 2+ years of experience. Structural Engineering firm located in New Orleans , LA. The firm has a solid backlog of mid to large size diverse Structural and Civil Engineering projects and is seeking a structural engineering intern or professional engineer with at least 2 years of experience in commercial building design. Casual atmosphere. Salary DOE. REVIT experience a plus.


Registered Electrical Engineer (Metairie, LA)
JBA Consulting Engineers is a multi-disciplined consulting engineering firm that strives to be a worldwide trusted advisor to our clients. With offices throughout the United States and international operations in locales such as Macau, Vietnam and the UAE, we provide superior engineering services to a wide range of clients on numerous complex projects. Our continued success is directly attributed to our deep sense of commitment and contributions by our talented staff.

JBA Consulting Engineers values employees with a combination of experience, commitment, passion and integrity. We are looking for collaborative individuals with solid backgrounds in electrical engineering. Candidates should have leadership experience and the ability to cultivate great relationships with new and existing clients. Project Engineer positions are also responsible for providing supervision for preparation of system design drawings and specifications for new construction, existing facilities expansion, and renovation projects. Projects are of moderate to high complexity.

Desired Candidate Attributes:
• Bachelor's Degree in Engineering from an accredited university or equivalent.
• Minimum 10-15 years professional experience.
• Revit knowledge helpful.
• Excellent communication, business development and team leading/building necessary.
• Professional license/NCEES record is a must and LEED accreditation is a plus.

Candidates must be interested in relocating to our Metairie, Louisiana office.

JBA Consulting Engineers offers employees and their dependents health, dental, vision and group term life insurance that is paid 100% by the company. We also have a 401k plan, relocation assistance as well as other supplemental insurance policies. JBA has paid holiday, sick, vacation and personal time and maintains professional memberships and licenses on behalf of the employee. We also have flexible work schedules to promote our work/life balanced environment!



 Electrical and Mechanical Designer(s) (CBD)
Engineer I (Electrical and Mechanical)

Reports to:
Project Engineer

Responsibilities:
Under close supervision, incumbent assists electrical Engineers by performing the routine aspects of engineering assignments such as plans, specifications and inspection reports, and subsequently providing familiarity with the programs, staff and operating procedures of the company.

Performs design calculations, sketches, technical comparisons and similar technical work as required by assignment. Researches code issues and works with City and State agencies. Researches design options and documents findings for Project Engineers and Mangers. Assists with other duties assigned. Attends kick off meeting, design review meetings and interacts with clients as experience progresses.

Education:
Bachelor's degree in Engineering preferred. (Electrical-Possess EIT Certification, or have the ability to take engineering exam within twelve months of hire.)

Experience:
Three to five years of relevant progressive experience. Knowledge of AutoCAD 2012 and Revit computer applications a must.

Salary:
Commensurate with experience, paid parking, excellent benefits, flex schedule.



 CAD Designer (New Orleans, LA)
We have an immediate need for an experienced CAD Designer who has experience in commercial plumbing piping design.
Engineering firm in New Orleans with multiple offices throughout the state has an immediate opening for an experienced CAD designer. The ideal candidate will have experience in plumbing design. Proficiency in Autocad and Revit are a must.

This is a great opportunity to expand and further a career in drafting and design. Candidates should possess prior related experience, possess a strong, client-focused orientation and commitment to service, strive to exceed expectations and always work with safety in mind. The ideal candidate should also have the ability to professionally represent the company.

Requirements
Qualified candidates must possess related design and drafting experience, experience in AutoCAD 2010 or later software, updated Revit software, the ability to multi task, the ability to create plumbing designs, be highly organized, and be computer savvy with experience using MS Excel and Word. Candidates must have a 2 year technical degree, or related field experience. Four year degree a plus.

The client offers a competitive salary and a good working environment in downtown New Orleans.
The client is looking to fill this position immediately.

Tom Hunt, CPC
National Managing Director
MSI International
New Orleans, LA
504-522-6700 x 3128
tom.hunt@msi-intl.com




 downtown architecture firm seeks architect/designer (New Orleans, LA)
Local downtown architecture firm seeks motivated professional with a Bachelor's Degree in Architecture and 2-5 years experience.

We are a full-service firm dedicated to client service and strong design. Projects include healthcare, educational, commercial, and multifamily buildings. Our open office environment is looking for a motivated designer with exceptional computer skills who takes ownership. Responsibilities may include involvement in all phases of design.

Requirements include design/cd experience, STRONG Revit skills a must, autocad skills, familiarity with Photoshop, LEED certification, and the ability to work both independently and collaboratively.


downtown architecture firm seeks architect/designer (New Orleans, LA)
Local downtown architecture firm seeks motivated professional with a Bachelor's Degree in Architecture and 2-5 years experience.

We are a full-service firm dedicated to client service and strong design. Projects include healthcare, educational, commercial, and multifamily buildings. Our open office environment is looking for a motivated designer with exceptional computer skills who takes ownership. Responsibilities may include involvement in all phases of design.

Requirements include design/cd experience, STRONG Revit skills a must, autocad skills, familiarity with Photoshop, LEED certification, and the ability to work both independently and collaboratively.




 Architect/Project Manager (New Orleans)
A well established, local award winning architectural firm is seeking a mid-level licensed architect with a minimum of 7 years of architectural experience. Applicant must have excellent management, design, communication and organizational skills with a background in educational, commercial, residential and historic renovations. Applicant must be proficient in current AutoCAD Desktop versions, Excel and most basic software programs necessary to accomplish the typical range of tasks and responsibilities, BIM Revit and other similar skills are a plus. We offer competitive salaries and medical benefits.


Intern Architect Position (Carrollton - New Orleans)
New Orleans Architectural firm is considering applications for a single opening for a Graduate Architect Intern experienced in production drafting
of residential and commercial working drawings in AutoCAD - Revit experience is a plus, but not required. This is a Full Time position.
*Hiring rate will be contingent upon an assessment of the candidate's qualifications as determined by a matrix of experience, education,
licensing, special skills, attitude, work ethic, references, and achievements.

For consideration, please submit cover letter, resume, and portfolio (in PDF format, 20MB max) to above email.



 Architect with Revit experience (New Orleans)
Architect with Revit experience needed.
Architect or non-registered graduate with 5 or more years experience since graduation needed to help us design 36K sq ft medical office building.

Our micro-sized firm produces work using Revit. We currently have two staff members - Principal and an Intern. Candidate will assist our team in designing our medical office project from design development through construction. Candidate must have Revit experience from day-one and be able to assist with all aspects of producing a project - design, detailing, communication with consultants and agencies, etc.

Our office is located in the Warehouse district close to museums, restaurants, music, art galleries, etc.

The ideal candidate has a Master of Architecture degree and 5 years of experience working in an architect's office since graduation with 2 or more years experience using Revit to produce all phases of architectural projects.

Requirements: This position is for a licensed architect or non-registered architectural graduate with Autodesk Revit software experience. Non-registered graduates must have a Bachelor or Masters degree in Architecture from a fully accredited School of Architecture. Candidates will be asked to demonstrate their Revit experience on our workstations. Please do not inquire about this position if you do not meet these requirements.

Email resume to GHArch [at] BellSouth.net

George Hero Architect, LLC
913 Magazine Street, Suite 100
New Orleans, LA 70130



Intern Architect (Greater New Orleans Area)
Intern Architect needed to work full-time at Civil/Structural Engineering company.

Responsibilities Include:
-Producing detailed AutoCAD drawings for residential home plans.
-Shoring design for home elevations.
-Processing field work and elevation data.


Required Experience:
-Min. Bachelor's degree in Architecture or related field
-1 year or greater experience working for professional office producing construction documents.
-Experience in AutoCAD 2012 (Revit experience a plus, but not required).
-Experience with interpreting building code data
-Strong math skills


For consideration, please submit cover letter, resume, and portfolio (in PDF format, 20MB max) to above email.

http://newyork.craigslist.org

Electrical Engineer (New York City)
Kohler Ronan, LLC Consulting Engineers is a multi-disciplined firm dedicated to providing exceptional Mechanical, Electrical, Plumbing and Fire Protection engineering design services. From our offices in Danbury, CT and New York, NY we collaborate with prominent architectural firms on a wide array of regional and nationally recognized project assignments. Commissions include those for world renowned Museums, Fine and Performing Arts Centers as well as prestigious Universities, state-of-the-art Educational facilities, and Luxury Residences. Additionally, we have the privilege of designing specialty systems for Landmark sites, and historically significant buildings across the country.

The Firm is currently in search of an electrical engineer to join our team of design professionals in our New York City office.

Qualifications: Graduation from a four-year college or university with major coursework in an Electrical Engineering curriculum and five years of professional engineering experience that includes commercial and/or institutional building construction. PE registration preferred but not required.

Applicants should have knowledge of/exposure to AutoCAD, REVIT, & Microsoft Office.

Key Duties: Individual shall have the ability to design all electrical aspects of a building project from Schematic Design through Construction Documents. Responsibilities will include service calculations, distribution equipment layout, general electrical floor plans, lighting and controls and specification preparation. Responsibilities will include project management, coordination with other trades, supervision of production personnel and client interface.

Kohler Ronan offers: Competitive Salary, Health Benefits, 401K plan, Profit Sharing



 Architecture - Solutions Specialist
For the Architectural candidate with a solid technical solutions background who has a desire to take on a more consultative role this position is a dream career. Working as part of our solutions consulting team, this is your chance to do strategic work with our clients and gain valuable experience as you manage cutting edge software application implementation projects. Take this opportunity to join a smart, driven company where you can accelerate your career!

Solutions Specialist - Architecture

Microdesk combines technology and business process consulting to help firms successfully plan, design, build and operate land and buildings. With Microdesk, you are part of a company that supports the life-cycle of the design process from planning through operating and managing. Our services includes business process consulting, CAD consulting, training and support, GIS and FM consulting, training and support, commercial-level software development, with a focus on desktop and web-based GIS and FM solutions.

We are seeking candidates with Architectural related backgrounds with a strong technical knowledge of AutoCAD Architecture and/or Revit Architecture, 3D modeling experience and BIM to support our growing clientele base in the usage of Autodesk BIM software products, such as Revit and AutoCAD Architecture. The candidate will also provide Consulting, Training, Technical Support and Implementation Services on this and other BIM products. The position requires strong technical, communication and time management skills.

The candidate must have 3-5 years experience in architecture related industry. Passion for architecture and latest BIM technology - particularly Revit - are a must.

Bachelor's or Associate's degree in Architecture or related field is a must. A valid driver's license and access to a vehicle is required due to travel requirements of this role.





 Junior Architect / CAD (Midtown)
Small Midtown based Architecture / Interior Design Firm with 50 years plus history, seeks full time self-motivated Junior-Intermediate Architect/CAD operator to work under direct supervision of RA. Healthcare experience preferred, must not necessary.

BArch or MArch from accredited program required
Strong written and communication skills required
Minimum of 2 - 4 years experience in NYC
Must have excellent Autocad / Architectural detailing skills and ability to communicate effectively with consultants and contractors.
Ability to generate 3D renderings
Revit/BIM knowledge preferred

If you meet above requirements, please submit your resume and work samples in PDF format (5MB Max)

•Compensation: 36 - 42K + Company paid Helthcare benefits
•Company paid IDP + Exam review courses
•Principals only. Recruiters, please don't contact this job poster.



 Intern/Architect in Training (Downtown)
Full-time position available for candidates with 1-2 years experience/recent grads.

Responsibilities: assist PM's on new construction and rehab jobs, including design, CDs, field visits, material research, specifications, sample boards, etc. Terrific learning opportunity. $15-$21/hr depending on experience. Benefits after 2 months.

Revit a must. AutoCAD, Adobe Creative Suite, MS Office Suite, a plus.

UAI designs multifamily residences for various nonprofit organizations with social concerns, i.e. formerly homeless, HIV positive, mentally ill, recovering addicts, etc. Our work also encompasses private multifamily residences for developers doing both market rate and affordable housing. Non-residential work includes corporate offices, religious, and, in the past, various community facilities and schools.

We are located in the Woolworth Building in lower Manhattan.



 Architect/Engineer/Construction Management Firm Need Freelance Help (Queens)
Architect/Engineer Firm has 20 states license is looking for freelance help in the following area, prefer candidate speak english and chinese but not required, driver license prefered, fexible schedule:

1. Freelance Architect: understand building code, has DOB filing experience, prefer to have one or more skills on the following software:

Auto Cad, 3D max, Revit, Maya, Sketchup, ArchiCad, Rhinoceron, Adove Design CSS, GIS, Photoshop, Illustrator, Indesign, V-ray, Podium, Piranesi, BIM, Phonics, Ecotect, Premiere, After Effect, Flash

2. MEP engineer: has HVAC, electrical, plumbing design experience and familiar with NYC codes

3. Project estimater, scheduler: has experience in project estimation & scheduleing

4. RFP preparation specialist: has experience of dealing with government RFPs, can prepare bid documents for owners

5. site safety manager: has certain certificate and experience





 Project Architect looking for freelance work. (Jersey City, NJ)
I am a 15 years of experience Senior Project Architect looking for freelance work. The ideal work would not take more than 30 hours per week of my time, Ideally 20 hours. My rate is negotiable, the most important for me is being able to work from home and set my own time. (My wife is an interior designer, so if your job is for interiors you get two for one)
Proficient in Autocad & Revit 2012
If you need my resume please send an email with the description of your job, the hourly rate you are offering and some idea of the dates and timeframe you need me.
Thank you



 Interior Designer
New York architecture and interior design firm seeking a highly qualified interior designer for full time position with benefits. The applicant must be a graduate from an accredited design/architectural program and must possess 5-8 years of related experience. Ideal candidate would be able to manage smaller projects with little supervision and have the ability to work on multiple projects in varying capacities.

Required Skills:
§ Space planning
§ Design conception and development
§ Strong AutoCAD skills
§ Good knowledge of working drawings and production skills
§ Ability to develop color palettes and finish schemes
§ Ability to develop FF&E package from selection to specification (including knowledge & experience with contract furniture)
§ Good presentation skills, must be able to communicate with clients and vendors

Preferred Qualifications:
§ 3D drawing/rendering, either by hand or computer
§ Revit
§ Millwork and interior architectural detailing
§ NCIDQ certified
§ LEED accreditation

Please forward all resumes/work samples to:
admin@gruzensamton.com



-CAD DRAFTERS -AutoCad & Revit (Midtown West)
For almost 50 years Ettinger Engineering Associates, a premier MEP/FP consulting engineering firm has been partnering with select developers, architects, institutions and municipal agencies to provide exceptional building design and application services.

-Prepare sets of drawings provided by our MEP/FP Senior Engineers in different file formats including CAD, PLT, PDF, or REVIT for our clients
-Set up new drawings in different scale for MEP/FP design
-Print all drawings in scale for Engineering design and issuing to the clients
-Incorporate new layouts in MEP/FP plans according to the progress schedule


Minimum of 3 years AUTOCAD and 1 year REVIT experience required. Must be able to read architectural drawings.

Come join Ettinger Engineering and work in a growing, fast-paced, open/friendly environment where there is growth potential and your contributions are always recognized.


Architectural Internship Summer and/or Spring (Manhattan )
Workshop/apd is a multi-disciplinary design studio with an emphasis on the integration of sustainable methods that can help to identify and solve the challenges of the built environment in the 21st Century. We seek motivated, organized and creative interns to join and contribute to an award-winning design studio.

Our internship suits students or recent graduates who would like to experience the practice of design. Specific requirements include knowledge of the following programs:

AutoCAD
Adobe Creative Suite (Photoshop, Illustrator, InDesign, etc.)
3D Studio Max
Revit
Photoshop

Before emailing your portfolio and resume, check our website at www.workshopapd.com, to become familiar with our work.

if you feel your skills match these requirements, please email your portfolio and resume in ONE PDF file to the address specified above. Applications without portfolios will not be considered. Part time and full time candidates are welcomed.

Positions are open for the spring term as well as the summer term. Two or more days required per week. Schedules are flexible.

NOTE:

Candidates must have authorization to work in the US.

NO PHONE CALLS!

Salary commensurate on experience. May vary from daily stipend, School credit, or hourly wage depending on qualifications.


AutoCAD Drafter & BIM Modeler (Financial District)
We are a consulting structural engineering firm. We seek a full-time Autocad Drafter and BIM Modeler, preferably with architectural training, to work with our structural engineers.

Applicants should have, as a minimum, 1 year experience in architectural or structural drafting with Autocad 2000 and Revit 2008, or later versions. Applicants should also be able to read and interpret architectural and structural drawings.

Benefits include:
-flexible working hours
-10 days vacation per year
-6 days sick leave per year
-major holidays
- 401(k) profit-sharing plan
-health, dental, vision insurance
- life insurance
-disability insurance

For more information, please visit our website at www.lera.com




 Designer Needed (Midtown)
This high-end design firm has an IMMEDIATE need for a Designer to join its expanding studio. Projects will include luxury multi-unit residential, mixed-use building, and custom homes of all design styles.

Candidates must have 4-6 years of experience and be adept in conceptual design, design development and have a firm knowledge and understanding of Revit, SketchUp and other 3D programs.

Please apply for a challenging and rewarding position at one of New York's most reputable and innovative firms. This is a career-track position for those looking to progress their career.



Structural Engineer/Designer (Fairfield County)
Structural Engineer/Designer minimum of 7 years design experience; EIT or PE a plus. Must have good customer relations skills and be able to follow through to take a project from conception to completion.

Develop contract documents for commercial, institutional and residential buildings with various structural designs consisting of steel, composite steel, light gauge steel, concrete, timber, heavy timber and masonry.

Field inspections and proficient report writing skills critical. Ability to handle multiple projects both large and small is important.

Knowledge of RAM Structural System, RISA Technologies, Windows, familiarity with with Revit and AutoCAD is critical

Office located in Fairfield County; flexible working hours, excellent benefits


Senior Electrical Engineer/Project Management (Midtown West)
For 50 years Ettinger Engineering Associates, a premier MEP/FP consulting engineering firm located in midtown Manhattan has been partnering with select developers, architects, institutions and municipal agencies to provide exceptional building design and application services.

Currently we offer excellent career opportunities for Senior Level Electrical Engineers with project management for BUILDING DESIGN. You will be responsible for project design with ability to project manage including coordinating all trades for a diverse group projects including new and conversion/renovations for hi-mid-low rise residential, schools, hotels, seniors housing and more. Your responsibilities will include but are not limited to systems design, creating plans, schematics, equipment selection, load calculations, systems narratives and specifications.

You must be able to professionally represent Ettinger Engineering Associates to clients and agencies at meetings and through written correspondence.

A BS in Engineering and a minimum of 6-10 years experience in building design. Excellent communication skills a must. PE and or LEED Accreditation and/or Revit experience a plus. Ability to file documents such as BFP, sewer, wet taps, HFT to appropriate agencies also a plus.

Come join Ettinger Engineering and work in a growing, fast-paced, open/friendly environment where there is growth potential and your contributions are always recognized. Send resume
Equal Opportunity Employer




Electrical En